Please remove $0 item(s) from cart - or - Request for Quote

HPE Apollo 4200 Gen10 CTO Server

Brand:
Type:
CTO Servers
Condition:
ECS Refurbished & Tested
-PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
-SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.

Multi-Quantity Discounts Available for ALL Line Items

** LARGE DISCOUNTS available for complete systems. Pricing displayed is for single item purchases **

Use the configuration tool to create your solution and submit it us for a quote OR send us a message with your complete build requirements to receive best pricing

READ ME

  • Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
  • “Submit for Quote” items can be added to your cart and sent to us via the cart page
  • Click the blue bar to close/open a section from view after choosing your options

HPE Chassis Options

If you can't fill all the drive slots. Please fill them with the appropriate blanks.

HPE Processors

The XL420 Motherboard that is installed in the Apollo 4200 holds up to 2 CPUs.

Platinum

2nd generation Intel Xeon Scalable Series

Gold

2nd generation Intel Xeon Scalable Series

Silver

2nd generation Intel Xeon Scalable Series

Memory LDIMM and RDIMM (Optional)

Supports up to 16 DIMMs
Mixing of RDIMM and LRDIMM memory is not supported.

HPE Persistent Memory (Optional)

A maximum 512GB per processor

Bezel, Blanks, and more (Optional)

Rear Drive Options (Optional)

Please read the Spec Manual or View the items for the requirements that go with each Cage.

Rear Drive Cage Controllers (Optional)

Please read the Spec Manual or View the items for the requirements that go with each Controller.

HPE LFF Drives SAS (3.5in) (Optional)

HPE LFF Drives SATA (3.5in) (Optional)

p07244-b21-hpe-apollo-4200

HPE SFF Drives SAS (2.5in) (Optional)

HPE SFF Drives SATA (2.5in) (Optional)

NVMe (Optional)

Must install the correct riser for the NVMe configuration you want.

M.2 Drives and Cards (Optional)

Networking Adapters (Optional)

FlexibleLOM (Optional)

Host Bus Adapters (HBAs) (Optional)

Storage Controller (Optional)

InfiniBand (Optional)

Accelerators (Optional)

USB (Optional)

The DVD-RW is only supported on USB 3.0 ports.

iLO Server Management (Optional)

Rail Kit (Optional)

Power Supply Unit (PSU)

All power supplies must be of the same input voltage, output rating, and efficiency rating. If non-matching power supplies are installed, you may receive an error message and/or experience operational issues with your server.

Select Warranty

Helpful Tip: Once desired configuration is selected click "Add to Cart". From the cart page you can submit a submit a quote request for best pricing

HPE Apollo 4200 Gen10

The HPE Apollo 4200 Gen10 Server offers an architecture optimized for Big Data Analytics, Software-Defined Storage, backup and archive, and other data storage-intensive workloads. It's unique, easily serviceable 2U design saves data center space with up to 28 LFF or 54 SFF hot plug drives. It delivers accelerated performance with superior bandwidth and balanced architecture, Intel Xeon Processors, and NVMe-connected SSDs.

The focus on security extends from FIPS 140-2 Level 1 validated storage controllers down to the system silicon level, taking full advantage of HPE innovations in firmware protection, malware detection, and recovery. With HPE GreenLake Flex Capacity and HPE Financial Services, you can combine the economic agility benefits of consumption-based IT with the performance and security of on-premise.

What's New for Apollo 4200 Gen10

  • Supports Intel Xeon Scalable Processor Family.
  • Optional rear storage upgrade to support up to 6 SFF NVMe solid state drives (SSDs).
  • Higher bandwidth and more balanced system architecture design, and without trade-offs between drive bays and I/O slots.
  • Firmware-level security and optional chassis intrusion options.
  • Flexible HPE Smart Array Gen10 Controllers support and encryption features to meet different performance requirements for storage solutions.
  • Support for daisy-chaining of out-of-band management network ports.

Ultra-dense and Rack Scale

Highest data storage density in a unique, easier to service 2U standard rack depth chassis.

Up to 28 Large Form Factor (LFF) or 54 Small Form Factor (SFF) hot-plug drives and without I/O compromises. Up to 392 TB in 2U space with 14 TB LFF drives support for the LFF models.

Support for daisy-chaining of out of band management network ports for 95% reduction in management network port consumption per 42U rack.


Know your Server - CTO Configuration Support

Need help with the configuration? Contact us today!

HPE Apollo 4200 Gen10 Base Knowledge
The Apollo 4200 has two rows of drives, one behind the other. This system will appear to have 12 LFF or 24 SFF drives. But with two rows of drives, the chassis actually holds 24LFF or 48SFF. The mixing of the drive form factor is not supported. The front 2 drive bay have to be the same (all SFF or all LFF). This Apollo 4200 Gen10 supports rear drive options. The Rear Drive Cages are 4 LFF Drives (only on the 24LFF chassis) or 6 SFF NVMe SSD, 6 SFF SAS/SATA, and the last option provides Dual FHHL PCIe Slots. The 2 SFF + 2 FHHL Riser kit, when this kit is installed, you'll also need the HPE Apollo 4200 P824i-p Enablement Kit (P11274-B21).

This Chassis holds 1 HPE ProLiant XL420 Gen10 motherboard. This motherboard holds 2 Processors Mixing of 2 different processor models is NOT allowed The Apollo 4200 Gen10 has up to 16 DIMM Slots on a two-socket configuration. The motherboard can support HPE Persistent Memory featuring Intel® Optane™ DC persistent memory. This memory is only supported with select 2nd generation Intel Xeon Scalable Series. Mixing RDIMM and LRDIMM memory is not supported.

If any of the rear drive cages are installed, you will need to also install one of the following storage controllers. HPE 2nd Cage FIO Controller Mode for Rear Storage (813546-B21), HPE Software RAID FIO Controller Mode for Rear Storage (P09655-B21), or HPE Smart Array E/P SR FIO Controller Mode for Rear Storage (P09656-B21).

Finally, if you install the 6SFF SAS/SATA Rear drive cage you must install the HPE Smart Array E/P SR FIO Controller Mode for Rear Storage (P09656-B21).

Rear Drive Cages Support Matrix P14010-B21 P07250-B21 P07943-B21 P0724B-21
6SFF SAS/SATA Rear Drive Cage Kit 6SFF NVMe Rear Drive Cage Kit 4LFF Rear Drive Cage Kit 2SFF Rear Drive Cage and 2 Full Height Half Length Riser Kit
P07244-B21 HPE Apollo 4200 Gen10 24LFF Supported
P07246-B21 HPE Apollo 4200 Gen10 48SFF Supported Supported Not Supported Supported


HPE Apollo 4200 Gen10 Maximum Internal Storage

Storage Capacity Configuration
Hot Plug SFF SAS HDD 129.6 TB 48+6 x 2.4 TB (with rear-drive cage option)
Hot Plug SFF SATA HDD 108 TB 48+6 x 2.0 TB (with rear-drive cage option)
Hot Plug SFF SAS SSD 829.44 TB 48+6 x 15.36 TB (with rear-drive cage option)
Hot Plug SFF SATA SSD 414.72 TB 48+6 x 7.68 TB (with rear drive cage option)
Hot Plug LFF SAS HDD 560 TB 24 + 4 x 20 TB (with rear-drive cage option)
Hot Plug LFF SATA HDD 560 TB 24 + 4 x 20 TB (with rear-drive cage option)
Hot Plug LFF SAS SSD 107.52 TB 24 + 4 x 3.84 TB (with rear-drive cage option)
Hot Plug LFF SATA SSD 215.04 TB 24 + 4 x 7.68 TB (with rear-drive cage option)
Hot Plug SFF NVMe PCIe SSD (Rear drive cage only) 92.16 TB 6 x 15.36 TB NVMe

HPE Apollo 4200 Gen10 NVMe Drives
If you install the rear drive cage for the 6 NVMe drives. You will also need a card that can support these drives. HPE NVMe CPU2 x6 FIO Controller Mode for Rear Storage (P09657-B21) or HPE NVMe CPU1 x4/CPU2 x2 FIO Controller Mode for Rear Storage (P09658-B21). When no controller mode is selected, all 6 SFF NVMe will be connected to processor 1 through PCIe slot 2. When HPE NVMe CPU2 x6 FIO Controller Mode for Rear Storage (P09657-B21) is selected, all 6 SFF NVMe SSDs will be connected to processor 2 through PCIe slot 6.

HPE Apollo 4200 Gen10 PCI Risers
There are 7 Total PCIe slots but Slots 4 and 5 are only available with the rear riser cage installed (P07248-B21). This Riser cage will provide 2 extra SFFs and 2 FHHL PCIe slots. When this Riser cage is installed PCIe slot 2 will not be available. This slot is where the riser cage sits.

There are a few more rear drive options, read the section above or take a peek at the Specs Manual below for more details.

Default Expansion Slots Expansion Slots # Technology Bus Width Connector Width Processor Slot Form Factor
1 PCIe 3.0 x16 x16 CPU1 Low Profile
2 PCIe 3.0 x24 x24 CPU1 Low Profile
5 PCIe 3.0 x8 x8 CPU2 Low Profile
6 PCIe 3.0 x24 x24 CPU2 Low Profile
7 PCIe 3.0 x16 x16 CPU2 Low Profile
2 SFF + 2FHHL Riser Kit Expansion Slots # Technology Bus Width Connector Width Processor Slot Form Factor
3 PCIe 3.0 x16 x16 CPU1 Full-height; half length
4 PCIe 3.0 x8 x8 CPU1 Full-height; half length


HPE Apollo 4200 Gen10 Cooling

10 system fans shipped as standard. If the Rear NVMe drive cage is installed. 4 Extra fans will come with that kit and be installed in the rear.

HPE Apollo 4200 Gen10 Flex Slot your power!
Mixing of 2 different power supplies is NOT allowed.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.

HPE Apollo 4200 Gen10 Lights Out! iLO
HPE iLO 5 ASIC.

HPE iLO with Intelligent Provisioning (standard) with Optional: iLO Advance and OneView

HPE iLO Advanced licenses offer smart remote functionality without compromise, for all HPE ProLiant servers. The license includes the full integrated remote console, virtual keyboard, video, and mouse (KVM), multi-user collaboration, console record and replay, and GUI-based and scripted virtual media and virtual folders. You can also activate the enhanced security and power management functionality.

 

Current Configuration

HPE Chassis Options

HPE Processors

Memory LDIMM and RDIMM (Optional)

HPE Persistent Memory (Optional)

Bezel, Blanks, and more (Optional)

Rear Drive Options (Optional)

Rear Drive Cage Controllers (Optional)

HPE LFF Drives SAS (3.5in) (Optional)

HPE LFF Drives SATA (3.5in) (Optional)

HPE SFF Drives SAS (2.5in) (Optional)

HPE SFF Drives SATA (2.5in) (Optional)

NVMe (Optional)

M.2 Drives and Cards (Optional)

Networking Adapters (Optional)

FlexibleLOM (Optional)

Host Bus Adapters (HBAs) (Optional)

Storage Controller (Optional)

InfiniBand (Optional)

Accelerators (Optional)

USB (Optional)

iLO Server Management (Optional)

Rail Kit (Optional)

Power Supply Unit (PSU)

Select Warranty

*list also serves as quick links to each section

Welcome to the Request Express Quoting Form!

for: HPE Apollo 4200 Gen10 CTO Server


This streamlined form is designed to simplify the quoting process for you. Whether you're uncertain about specific parts or seeking a hassle-free experience, you're in the right place.

Provide us with the necessary details, and we'll generate a customized quote for your server. Even if you're unsure about the exact components you need, we've got you covered. Our team will tailor a solution based on the information you provide.

Let's get started!
Simply fill out the form, and we'll take care of the rest.


Name *
Email *
Message *
Preferred Brand
Form Factor
Rack Unit of Height (#U)
Processor(s)
Memory
Total Amount of Memory
Total Amount of Usable Storage

Storage Type


RAID

List Networking Connection needed:
Rack Space Restrictions
Which OS do you plan on using:


Price as Configured: 0

Add to Cart

Error Submitting Cart. Please get in touch with us for support.

Please select all the mandatory items in the configuration list before submitting the cart.

One or more items in your cart has no price. This will be submitted as a "Request for a Quote".

Product Specs

Base Standard Capabilities

Product features

Feature
Description
Processors
Processors - Up to 2 of the following depending on model:
Intel Xeon Models
CPU Frequency
Cores
L3 Cache
Power
UPI
DDR4
Memory per socket
Platinum Processors
Platinum 8276 Processor
2.2 GHz
28
38.50MB
165 W
3 @ 10.4 GT/s
2933 MT/s
1TB
Platinum 8260 Processor
2.4 GHz
24
35.75MB
165 W
3 @ 10.4 GT/s
2933 MT/s
1TB
Platinum 8160 Processor
2.1 GHz
24
33.00MB
150 W
3 @ 10.4 GT/s
2666 MT/s
768GB
Gold Processors
Gold 6252 Processor
2.1 GHz
24
35.75MB
150 W
3 @ 10.4 GT/s
2933 MT/s
1TB
Gold 6248 Processor
2.5 GHz
20
27.50MB
150 W
3 @ 10.4 GT/s
2933 MT/s
1TB
Gold 6242 Processor
2.8 GHz
16
22.00MB
150 W
3 @ 10.4 GT/s
2933 MT/s
1TB
Gold 6240 Processor
2.6 GHz
18
24.75MB
150 W
3 @ 10.4 GT/s
2933 MT/s
1TB
Gold 6238 Processor
2.1 GHz
22
30.25MB
140 W
3 @ 10.4 GT/s
2933 MT/s
1TB
Gold 6234 Processor
3.3 GHz
8
24.70MB
130 W
3 @ 10.4 GT/s
2933 MT/s
1TB
Gold 6230 Processor
2.1 GHz
20
27.50MB
125 W
3 @ 10.4 GT/s
2933 MT/s
1TB
Gold 6226 Processor
2.7 GHz
12
19.25MB
125 W
3 @ 10.4 GT/s
2933 MT/s
1TB
Gold 6148 Processor
2.4 GHz
20
27.50MB
150 W
3 @ 10.4 GT/s
2666 MT/s
768GB
Gold 6140 Processor
2.3 GHz
18
24.75MB
140 W
3 @ 10.4 GT/s
2666 MT/s
768GB
Gold 6134 Processor
3.2 GHz
8
24.75MB
130 W
3 @ 10.4 GT/s
2666 MT/s
768GB
Gold 6132 Processor
2.6 GHz
14
19.25MB
140 W
3 @ 10.4 GT/s
2666 MT/s
768GB
Gold 6130 Processor
2.1 GHz
16
22.00MB
125 W
3 @ 10.4 GT/s
2666 MT/s
768GB
Gold 5220 Processor
2.2 GHz
18
24.75MB
125 W
2 @ 10.4 GT/s
2666 MT/s
1TB
Gold 5218 Processor
2.3 GHz
16
22.00MB
125 W
2 @ 10.4 GT/s
2666 MT/s
1TB
Gold 5215 Processor
2.5 GHz
10
13.75MB
85 W
2 @ 10.4 GT/s
2666 MT/s
1TB
Gold 5118 Processor
2.3 GHz
12
16.50MB
105 W
2 @ 10.4 GT/s
2400 MT/s
768GB
Silver Processors
Silver 4216 Processor
2.1 GHz
16
22.00MB
100 W
2 @ 9.6 GT/s
2400 MT/s
1TB
Silver 4215 Processor
2.5 GHz
8
11.00MB
85 W
2 @ 9.6 GT/s
2400 MT/s
1TB
Silver 4214 Processor
2.2 GHz
12
16.50MB
85 W
2 @ 9.6 GT/s
2400 MT/s
1TB
Silver 4210 Processor
2.2 GHz
10
13.75MB
85 W
2 @ 9.6 GT/s
2400 MT/s
1TB
Silver 4208 Processor
2.1 GHz
8
11.00MB
85 W
2 @ 9.6 GT/s
2400 MT/s
1TB
Silver 4116 Processor
2.1 GHz
12
16.50MB
85 W
2 @ 9.6 GT/s
2400 MT/s
768GB
Silver 4114 Processor
2.2 GHz
10
13.75MB
85 W
2 @ 9.6 GT/s
2400 MT/s
768GB
Silver 4110 Processor
2.1 GHz
8
11.00MB
85 W
2 @ 9.6 GT/s
2400 MT/s
768GB
Form factor
2U rack
Chassis types 1
  • 24 LFF

  • 48 SFF

System fans
10 system fans shipped as default
Chipset 6
Intel C621 chipset
On system management chipset 7
HPE iLO 5 Application-Specific Integrated Circuit (ASIC)
System board
HPE ProLiant XL420 Gen10 Server
Memory 8
Type
HPE DDR4 SmartMemory Registered Dual In-Line Memory Module (RDIMM), Load Reduced (LRDIMM)
Dual In-line Memory Module (DIMM) slots available
16
8 DIMM slots per processor, 6 channels per processor, 2-1-1 deployment
Maximum capacity (LRDIMM)
2.0 TB
16 x 128 GB LRDIMM - 2933 MT/s
Maximum capacity (RDIMM)
1.0TB
16 x 64 GB RDIMM - 2933 MT/s
Maximum capacity (HPE Persistent Memory)
512GB per processor/socekt
Memory protection
Advanced ECC
Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip.
Online spare
Memory online spare mode detects a rank that is degrading and switches operation to the spare rank.
Expansion slots
Default expansion slots
Expansion Slots #
Technology 
Bus Width
Connector Width
Processor
Slot Form Factor
1
PCIe 3.0
x16
x16
CPU1
Low profile
2
PCIe 3.0
x24
x24
CPU1
Low profile
5
PCIe 3.0
x8
x8
CPU2
Low profile
6
PCIe 3.0
x24
x24
CPU2
Low profile
7
PCIe 3.0
x16
x16
CPU2
Low profile
2 SFF + 2 Full-Height, Half-Length (FHHL) riser kit 9
3
PCIe 3.0
x16
x16
CPU1
FHHL
4
PCIe 3.0
x8
x8
CPU1
FHHL
Storage controllers
Software RAID 10
HPE Smart Array S100i SR Gen10 SW RAID
Essential RAID controllers
  • HPE Smart Array E208i-a SR G10 LH controller

  • HPE Smart Array E208i-p SR Gen10 controller

  • HPE Smart Array E208e-p SR Gen10 controller

Performance RAID controllers 11
  • HPE Smart Array P408i-a SR G10 LH controller

  • HPE Smart Array P408i-p SR Gen10 controller

  • HPE Smart Array P408e-p SR Gen10 controller

  • HPE Smart Array P816i-a SR G10 LH controller

  • HPE Smart Array P824i-p MR Gen10 controller

Internal storage devices
  • Hard drives

  • None ship standard

Maximum storage 12
Storage 
Capacity
Configuration
Hot-Plug SFF SAS Hard Disk Drive (HDD)
120TB
48 + 2 x 2.4TB (With rear drive cage option)
Hot-Plug SFF SATA HDD
100TB
48 + 2 x 2.0TB (With rear drive cage option)
Hot-Plug SFF SAS SSD
384TB
48 + 2 x 7.68TB (With rear drive cage option)
Hot-Plug SFF SATA SSD
384TB
48 + 2 x 7.68TB (With rear drive cage option)
Hot-Plug LFF SAS HDD
392TB
24 + 4 x 14TB (With rear drive cage option)
Hot-Plug LFF SATA HDD
392TB
24 + 4 x 14TB (With rear drive cage option)
Hot-Plug LFF SAS SSD
107.52TB
24 + 4 x 3.84GB (With rear drive cage option)
Hot-Plug LFF SATA SSD
53.76TB
24 + 4 x 1.92TB (With rear drive cage option)
Hot-Plug SFF NVMe PCIe SSD (Rear drive cage only)
92.16TB
6 x 15.36TB NVMe
Power supply 13
  • HPE 800 W flex slot platinum Hot-Plug low halogen power supply kit.

  • HPE 1600 W flex slot platinum Hot-Plug low halogen power supply kit.

Interfaces
Video
1 rear - Video Graphics Array (VGA) port
Network ports
2 x 1 GbE Dmbedded NIC
iLO remote management port
2 x 1Gb Dedicated
MicroSD slot 14
1 MicroSD slot
USB 2.0
1 Front (Standard on all chassis types)
USB 3.0
Up to 3 total: 2 rear, 1 internal
Industry standard compliance 15
  • Advanced Configuration and Power Interface (ACPI) 6.1 compliant

  • Peripheral Component Interconnect express (PCIe) 3.0 compliant

  • Wake-on-LAN (WOL) support

  • Microsoft logo certifications

  • Preboot eXecution Environment (PXE) support

  • USB 3.0 compliant

  • USB 2.0 compliant

  • System Management BIOS (SMBIOS) 3.1

  • Unified Extensible Firmware Interface (UEFI) 2.6

  • Redfish API

  • Intelligent Platform Management Interface (IPMI) 2.0

  • Secure digital 4.0

  • Trusted Platform Module (TPM) 2.0 support

  • Advanced Encryption Standard (AES)

  • Triple Data Encryption Standard (3DES)

  • Simple Network Management Protocol (SNMP) v3

  • Transport Layer Security (TLS) 1.2

  • DMTF Systems Management Architecture for Server Hardware Command Line (SMASH CLP)

  • Active directory v1.0

  • American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) A3/A4

  • Energy star

Graphics
  • Integrated video standard

    • Video modes up to 1920 x 1200 - 60 Hz (32 bp)

    • 16MB video memory

  • HPE iLO 5 on system management memory

    • 32MB flash

    • 4Gb DDR3 with ECC protection

HPE Server UEFI/legacy ROM 16
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
  • Secure boot and secure start enable for enhanced security.

  • Operating System (OS) specific functionality.

  • Support for > 2.2TB (Using GUID Partition Table (GPT)) boot drives.

  • USB 3.0 stack

  • Embedded UEFI shell

  • Mass configuration deployment tool using iLO RESTful API that is Redfish API conformant.

  • PXE boot support for IPv6 networks

  • Workload profiles for simple performance optimization.

  • UEFI boot mode only

  • TPM 2.0 support

  • NVMe boot support

  • Platform Trust Technology (PTT) can be enabled.

  • iSCSI software initiator support

  • HTTP/HTTPs boot support as a PXE alternative.

  • Boot support for option cards that only support a UEFI option ROM.

Embedded management
  • HPE Integrated Lights-Out (HPE iLO)

  • UEFI

  • Intelligent provisioning

  • iLO RESTful API

Server utilities
  • Active Health System (AHS)

  • AHS viewer

  • Smart update

  • iLO amplifier pack

  • HPE iLO mobile application

  • RESTful interface tool

  • Scripting tools

  • HPE OneView standard

  • HPE Systems Insight Manager (HPE SIM)

Security
  • UEFI secure boot and secure start support

  • Immutable silicon root of trust

  • FIPS 140-2 validation

  • Common criteria certification

  • Configurable for PCI DSS compliance

  • Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser.

  • Support for Commercial National Security Algorithms (CNSA).

  • iLO security modes including a new iLO advanced premium security license.

  • Granular control over iLO interfaces

  • Smart card (PIV/CAC) and kerberos based 2-factor authentication.

  • Tamper-Free updates - Components digitally signed and verified.

  • Secure recovery - Recover critical firmware to known good state on detection of compromised FW.

  • Ability to rollback firmware

  • Secure erase of NAND

  • TPM 2.0 option

  • Bezel locking kit

NOTE:
  1. Optional rear drive cages: 6 NVMe SSD (SFF), 4 LFF (Only for 24LFF), or 2 SFF + 2 FHHL riser kit.
  2. Check the below link for more information regarding Intel Xeon processors.

    Click here to access the page for Intel Xeon Processors .


    • Platinum processors: 2 and 4 socket capable, 2S - 2UPI, 4S - 3UPI, 8S - 3UPI - 10.4 GT/s.
    • 6-channel DDR4 - 2666 MT/s. 768GB max memory capacity (1.5TB on select skus).
    • Intel turbo boost technology, Intel Hyper-Threading technology Intel AVX-512 (2 x 512-bit FMA). 48 lanes PCIe 3.0, advanced RAS.

    • Gold processors: 2 and 4 socket capable, 2S - 2UPI, 4S - 3UPI - 10.4 GT/s. 6-channel DDR4 - 2400 MT/s (SKU 5122 - Supports 2666 MT/s).
    • 768GB max memory capacity (1.5TB on select skus).
    • Intel turbo boost technology, Intel Hyper-Threading technology, Intel AVX-512 (1 x 512-bit FMA) (SKU 5122 - Supports 2 x 512-bit FMA). 48 lanes PCIe 3.0, advanced RAS.

    • Silver processors: 2 socket capable, 2S - 2UPI - 9.6 GT/s. 6-channel DDR4 - 2400 MT/s, 768GB max memory capacity.
    • Intel turbo boost technology, Intel Hyper-Threading technology, Intel AVX-512 (1 x 512-bit FMA).
    • 48 lanes PCIe 3.0, standard RAS.
  3. Check the below link for more information regarding Intel chipsets:

    Click here to access the page for Intel Server Chipsets  .

  4. Check the below link for more information on iLO:

    Click here to access the QuickSpecs page for HPE iLO .


  5. If 2 SFF + 2 FHHL riser kit is installed, the PCIe slot 2 will be unavailable due to occupation of the riser.

    • HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional controller will be needed, and for Configure-To-Order (CTO) orders select the legacy mode settings part, 758959-B22.
    • HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled.
    • The S100i supports windows only
    • For Linux users, HPE offers a solution that uses In-Distro Open-Source software to create a Two-Disk RAID 1 boot volume. Check the below link for more information on this:

      Click here to access the page for Implementing Linux Software RAID1 on HPE ProLiant Servers .

  6. Check the below link for additional information on HPE Smart Array Gen10 controllers:

    Click here to access the Data sheet on HPE Smart Array Gen10 .


    • SFF NVMe PCIe SSD is only supported in the optional rear dirve cage.
    • Only 1 optional rear dirve cage can be installed per server.

    • Available in 94% efficiency
    • 1600 W power supplies only support high line voltage (200 V ac to 240 V ac).
  7. The MicroSD slot is not Hot-Pluggable, power down server before removal.
  8. Check the below link for additional technical thermal details regarding ambient temperatures, humidity and features support:

    Click here to access the Hewlett Packard Enterprise Information Library .


    • The UEFI system utilities tool is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. Check the below link for more information on UEFI:

      Click here to access the webpage for Unified Extensible Firmware Interface (UEFI) .

    • For UEFI boot mode, boot environment and OS image installations should be configured properly to support UEFI.
    • UEFI FIO setting (758959-B22) can be selected to configure the system in legacy mode in the factory for the HPE ProLiant Gen10 Server.

top

Specs 1

Software overview

Feature
Description
OS and virtualization software
  • Windows Server 2016 (Most recent version)

  • VMware ESXi 6.0 U3

  • VMware ESXi 6.5 and U2 upon release

  • VMware ESXi 6.7 and U1 upon release

  • Red Hat Enterprise Linux (RHEL) 7.64

  • SUSE Linux Enterprise Server (SLES) 12 64-bit SP3 and 15 64-bit SP1

  • Ubuntu 16.04 and 18.04

  • Oracle Linux ver. 7.6

  • ClearOS1

  • CentOS2

NOTE:
  1. ClearOS allows user to build a fully functional server that is just right for user at no upfront cost. Check the below link for more information on ClearOS:

    Click here to access the page for ClearOS and ClearVM Software from HPE .

  2. For more information on HPE Certified and supported ProLiant Servers for OS and virtualization software and latest listing of software drivers available for the server.

    Click here to access the webpage for Server OS and virtualization software .

top

Physical specifications

Specifications
Description
Dimensions (H x W x D)
8.75 x 44.80 x 82.55 cm (3.44 x 17.63 x 32.50 in)
Weight (Approximate)
  • Minimum: 22.34 kg (49.25 lb)

  • Maximum: 40.60 kg (89.51 lb)

top

Electrical specifications

Specifications
Description
Rated line voltage
  • 100 to 120 V ac

  • 200 to 240 V ac

BTU rating (Maximum)
For 800 W power supply: 3207 BTU/hr (At 100 V ac), 3071 BTU/hr (At 200 V ac), 3112 BTU/hr (At 240 V ac) for China only
Power supply output (Per power supply)
Rated Steady-State power
  • For 1600 W power supply: 1600 W (At 240 V ac), 1600 W (At 240 V dc) for China only

  • For 800 W power supply: 800 W (At 100 V ac), 800 W (At 240 V ac), 800 W (At 240 V dc) input for China only

Maximum peak power
For 1600 W power supply: 1600 W (At 200 to 240 1 V ac), 1600 W (At 240 V dc) input for China only

top

Environmental specifications

Specifications
Description
Standard operating support
  • 10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate of change may be limited by the type and number of options installed

  • System performance during standard operating support may be reduced if operating with a fan fault or above 30°C (86°F)

  • For approved hardware configurations, the supported system inlet range is extended to be: 5° to 10°C (41° to 50°F) and 35° to 40°C (95° to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft)

  • For approved hardware configuration for the system listed at the below url:

    Click here to access the Hewlett Packard Enterprise Information Library .

Extended ambient operating support
  • For approved hardware configurations, the supported system inlet range is extended to be: 40° to 45°C (104° to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft)

  • For approved hardware configuration for the system listed at the below url:

    Click here to access the Hewlett Packard Enterprise Information Library .

  • System performance may be reduced if operating in the extended ambient operating range or with a fan fault

Relative humidity (Rh) (Non-Condensing)
  • Operating: 8% to 90% - Rh, 28°C (82.4°F) maximum wet bulb temperature, Non-Condensing

  • Non-Operating: 5% to 95% Rh, 38.7°C (101.7°F) maximum wet bulb temperature, Non-Condensing

Altitude
  • Operating: 3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min)

  • Non-Operating: 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min)

Acoustic noise
Configuration SKU
Entry
Base
Performance
Idle
LWAd
5.1 B
5.1 B
5.2 B
LpAm
35 dBA
35 dBA
36 dBA
Operating
LWAd
5.3 B
5.2 B
5.9 B
LpAm
36 dBA
38 dBA
45 dBA
NOTE: Acoustics levels presented here are generated by the test configuration only. Acoustics levels will vary depending on system configuration. Values are subject to change without notification and are for reference only

top

Safety certifications

Specifications
Description
Emissions Classification (EMC)
To view the regulatory information for the product, view the safety and compliance information for server, storage, power, networking, and rack products, available at the HPESC:

top

Spec Sheet 4

Technical specifications HPE Apollo 4200 Gen10 Server
Memory protection features HPE Advanced Memory Error Detection Technology, including Fast Fault Tolerance (selected memory options)
CPU Intel® Xeon® Scalable 8200/8100 series, Intel® Xeon® Scalable 6200R/6200/6100 series, Intel® Xeon® Scalable 5200R/5200/5100 series, Intel® Xeon® Scalable 4200R/4200/4100 series
Memory 16 DIMM slots for HPE DDR4 SmartMemory, maximum 2.0 TB depending on processor model
Network Embedded dual-port 1GbE and optional PCIe NICs up to 100 Gb/s
Storage Up to 24 LFF or 48 SFF front hot-pluggable drive bays optional rear storage upgrade with 4 LFF, 2 SFF + 2 FHHL Riser, 6 SFF SAS/SATA or 6 SFF NVMe drive cages
support for SAS, SATA, or NVMe drives depending on rear drive cage kit
Boot capabilities Direct from SSD, HDD, Dual M.2 SSD, internal USB, MicroSD, network
System configuration(s) Front 24 LFF with optional 4 LFF, 2 SFF + 2 FHHL Riser, 6 SFF SAS/SATA or 6 SFF NVMe Rear Drive Cages
Front 48 SFF with optional 2 SFF + 2 FHHL Riser, 6 SFF SAS/SATA or 6 SFF NVMe Rear Drive Cages
Power Up to 2 power supplies, choice of 800W or 1600W hot-plug and redundant
Management features Includes HPE iLO Standard with Intelligent Provisioning (embedded) and HPE OneView Standard (requires download)
Optional HPE iLO Advanced, HPE iLO Advanced Premium Security Edition, and HPE OneView Advanced
Compatible operating systems Operating systems and virtualization solutions for HPE servers from Microsoft, Red Hat, SUSE, Ubuntu, VMware, and more.
Accelerator type supported HPE PCIe Workload Accelerators
Form factor 2U standard rack depth
Weight 49.25 lb (empty), 89.51 lb (fully loaded)
Product dimensions (imperial) 3.44 x 17.63 x 32.50 in (dimensions without bezel)

Shipping Information

Express Computer Systems can ship to virtually any address in the world and provides you with the best shipping rates possible. Cost of shipping varies depending on what service you require, your destination and size of the shipment. Shipping costs will be calculated separately from your order and billed to you post purchase. In the notes section of your order please provide us with your preferred shipping method and we will get back to you.

Custom configured orders ship within 2 business days after all required products are in stock.

Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine, California.

Domestic Shipments
  • Standard Ground
    • Shipping time: 2-7 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-10 business days
    • Excludes weekends, holidays or weather delays.
  • 3 Business Days
    • Shipping time: 3 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 3-6 business days
    • Excludes weekends, holidays or weather delays.
  • 2 Business Days
    • Shipping time: 2 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-5 business days
    • Excludes weekends, holidays or weather delays.
  • Overnight / Next Business Day
    • Shipping time: 1 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 1-4 business days
    • Excludes weekends, holidays or weather delays.
International Shipments
  • International Economy
    • Shipping time: 4-6 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 5-9 business days
    • Excludes weekends, holidays or weather delays.
  • International Priority
    • Shipping time: 1-3 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-6 business days
    • Excludes weekends, holidays or weather delays.

For more information on shipping view our Shipping Information page or send us a message

ECS Warranty Information

Express Computer Systems (ECS) provides a 1 year parts warranty against defects in material or workmanship that will affect the products functionality. All refurbished items are tested prior to shipping to guarantee up-time upon arrival. If you are having issues with an item we provided please Contact Us and we will do our best to assist you.

What does our ECS warranty cover?
We offer 1 year warranty as standard and additional years can be added to fit your needs. Please reach out to a sales associate via the Contact Us page or live chat for more information on extended coverage options. During the coverage period if your product fails we will offer a Next Business Day replacement. If we are unable to replace the product we will refund its original selling price. Shipping costs and tax are not refundable. Express Computer Systems retains the right to decide whether the goods will be replaced or refunded.

What is not covered by our warranty?
Our warranty does not cover any problem caused by the following conditions:

  1. accidents; misuse; carelessness; electrostatic discharge; shock; temperature or humidity beyond the specifications of the product; improper installation; operation; modification;
  2. any improper use that contravenes the instructions in the user manual;
  3. problems caused by other equipment. Our warranty is void if the product is returned with damaged, removed, counterfeit labels, or any modifications (including any component or external cover removal). Our warranties do not cover data loss or damages to any other equipment. In addition, our warranties do not cover incidental damages, consequential damages, or costs related to data recovery, removal, and installation.

Important notes:

  • Please ask for additional warranty/coverage that you may require in addition to the standard 1 ECS warranty prior to final purchase. Requesting additional warranty after your purchase can be denied.
  • FREE technical support is provided on purchased items via phone, email, or live chat.

About Express Computer Systems

Express Computer Systems is committed to transforming our customers’ IT infrastructure with high quality products at affordable costs. Our sales reps and customer support engineers understand our customers rely heavily on advanced technology to run their business but need to do so without breaking the bank.

We specialize in building custom server configurations, custom storage solutions, networking solutions, and components from top manufacturers including HPE, Dell, Cisco, NetApp, Dell EMC, HPE Nimble and many others.

Subscribe