Please remove $0 item(s) from cart - or - Request for Quote

This website performs best when viewed from a Desktop

All

  • All
  • AMD
  • APC
  • Avago
  • Brocade
  • Cisco
  • Dell
  • Dell CTO
  • ECS
  • EMC
  • EqualLogic
  • Express Computer Systems
  • Hitachi
  • HPE
  • Hynix
  • IBM
  • Intel
  • Mellanox
  • Micron
  • NetApp
  • Nvidia
  • OEM
  • Samsung
  • Seagate
  • Toshiba
  • Xilinx

    HPE Apollo 4200 Gen10 CTO Server

    Brand:
    Type:
    CTO Servers
    Condition:
    ECS Refurbished & Tested
    -PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
    -SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.

    Multi-Quantity Discounts Available for ALL Line Items

    ** LARGE DISCOUNTS available for complete systems. Pricing displayed is for single item purchases **

    Use the configuration tool to create your solution and submit it us for a quote OR send us a message with your complete build requirements to receive best pricing

    READ ME

    • Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
    • “Submit for Quote” items can be added to your cart and sent to us via the cart page
    • Click the blue bar to close/open a section from view after choosing your options

    HPE Chassis Options

    If you can't fill all the drive slots. Please fill them with the appropriate blanks.

    HPE Processors

    The XL420 Motherboard that is installed in the Apollo 4200 holds up to 2 CPUs.

    Platinum

    2nd generation Intel Xeon Scalable Series

    Gold

    2nd generation Intel Xeon Scalable Series

    Silver

    2nd generation Intel Xeon Scalable Series

    Memory LDIMM and RDIMM (Optional)

    Supports up to 16 DIMMs
    Mixing of RDIMM and LRDIMM memory is not supported.

    HPE Persistent Memory (Optional)

    A maximum 512GB per processor

    Bezel, Blanks, and more (Optional)

    Rear Drive Options (Optional)

    Please read the Spec Manual or View the items for the requirements that go with each Cage.

    Rear Drive Cage Controllers (Optional)

    Please read the Spec Manual or View the items for the requirements that go with each Controller.

    HPE LFF Drives SAS (3.5in) (Optional)

    HPE LFF Drives SATA (3.5in) (Optional)

    p07244-b21-hpe-apollo-4200

    HPE SFF Drives SAS (2.5in) (Optional)

    HPE SFF Drives SATA (2.5in) (Optional)

    NVMe (Optional)

    Must install the correct riser for the NVMe configuration you want.

    M.2 Drives and Cards (Optional)

    Networking Adapters (Optional)

    FlexibleLOM (Optional)

    Host Bus Adapters (HBAs) (Optional)

    Storage Controller (Optional)

    InfiniBand (Optional)

    Accelerators (Optional)

    USB (Optional)

    The DVD-RW is only supported on USB 3.0 ports.

    iLO Server Management (Optional)

    Rail Kit (Optional)

    Power Supply Unit (PSU)

    All power supplies must be of the same input voltage, output rating, and efficiency rating. If non-matching power supplies are installed, you may receive an error message and/or experience operational issues with your server.

    Select Warranty

    Helpful Tip: Once desired configuration is selected click "Add to Cart". From the cart page you can submit a submit a quote request for best pricing

    What's New for Apollo 4200 Gen10
    • 2U (28 LFF or 54 SFF) Chassis Options
    • Optional rear drive up to 6 SFF/NVMe or 4 LFF
    • (2) Intel Xeon 1st & 2nd Gen Scalable processors
    • (16) 2933MT/s DDR4 DIMMs | 8 DIMMs per processor
    • HPE Persistent Memory Support
    • Supports up to 2.0TB of DDR4 memory
    • (7) PCIe 3.0 slots
    • HPE iLO 5
    • HPE NS204i-p OS Boot Device Support
    • HPE Smart Array P824i-p MR Gen10 12G SAS Controller
    • Rear NVMe Drives Support
    • No GPU Supported

    The HPE Apollo 4200 Gen10 Server delivers enhanced storage density and performance in a 2U form factor, designed for modern data-intensive workloads. It supports up to 28 LFF or 54 SFF hot-plug drives, providing exceptional capacity and flexibility. The LFF chassis allows up to 448 TB of storage using 16 TB drives, scaling to over 8 PB in a standard 42U rack. For high-performance applications, the SFF chassis supports up to 54 NVMe, SAS, or SSD drives, offering increased throughput and reduced latency—ideal for workloads like big data analytics, AI, and content delivery. With support for NVMe storage and HPE Smart Array controllers, the Gen10 version delivers faster performance and improved scalability over its predecessor.

    The HPE Apollo 4200 Gen10 Server focuses on storage-intensive and compute-friendly workloads but does not natively support GPU accelerators. Instead, its design prioritizes high-capacity storage, flexible drive configurations, and advanced management features, making it a robust solution for enterprise applications like big data, data analytics, and video streaming environments.

    Ideal for:

    • Artificial Intelligence (AI)
    • Big Data Analytics
    • Cloud Servers
    • Data Analytics
    • Deep Learning (DL)
    • High-Performance Computing (HPC)
    • Hyper-Converged infrastructure (HCI)
    • Machine Learning (ML)
    • Video Analytics
    • Video Streaming
    • Virtualization
    • Virtual Machines (VM)
    • Web Tech
    • Anything as a service (Xaas)

    CTO Configuration Support

    Need help with the configuration? Contact us today!

    Chassis Options
    HPE Apollo 4200 Gen10 LFF P07244-B21 Chassis Apollo 4200 Gen10 LFF
    P07244-B21
    Rear Drive Options
    • 4LFF Rear Cage Kit (P07943-B21)
    • 2SFF Rear Drive + 2 FLHL Riser Kit (P07248-B21)
    • 6SFF Rear Cage Kit (P14010-B21)
    • 6NVMe Rear Cage Kit (P07250-B21)
    Maximum Internal Storage | LFF
    • SAS 560TB (24+4) x 20TB
    • SAS SSD 107.52TB (24+4) x 3.84TB
    • SATA 560TB (24+4) x 20TB
    • SATA SSD 215.04 TB (24+4) x 7.68TB
    • NVMe 92.16 TB (6) x 15.36TB

    Dimensions: (H) x (W) x (D)
    • 3.44 x 17.63 x 32.50 in
    • 8.75cm x 44.8 x 82.55 cm
    Weight:
    • Min: 49.25 lb (22.34 kg)
    • Max: 89.51 lb (40.6 kg)
    HPE Apollo 4200 Gen10 SFF p07246-b21 Chassis Apollo 4200 Gen10 SFF
    P07246-B21
    Rear Drive Options
    • 2SFF Rear Drive + 2 FLHL Riser Kit (P07248-B21)
    • 6SFF Rear Cage Kit (P14010-B21)
    • 6NVMe Rear Cage Kit (P07250-B21)
    Maximum Internal Storage | SFF
    • SAS 129.6TB (48+6) x 2.4TB
    • SAS SSD 829.44TB (48+6) x 15.36TB
    • SATA 108TB (48+6) x 2TB
    • SATA SSD 414.72TB (48+6) x 7.68TB

    Dimensions: (H) x (W) x (D)
    • 3.44 x 17.63 x 32.50 in
    • 8.75cm x 44.8 x 82.55 cm
    Weight:
    • Min: 51.59 lb (23.40 kg)
    • Max: 81.28lb (36.87kg)
    HPE Apollo 4200 Gen10 NVMe Drives | 6 NVMe

    The HPE Apollo 4200 Gen10 server supports up to 6 SFF NVMe drives in the rear drive cage. By default, all drives connect to Processor 1 via PCIe slot 2 without requiring a controller mode. For better performance, optional modes are available: the HPE NVMe CPU2 x6 FIO Controller Mode (P09657-B21) routes all 6 drives to Processor 2 via PCIe slot 6, while the HPE NVMe CPU1 x4/CPU2 x2 FIO Controller Mode (P09658-B21) splits 4 drives to Processor 1 and 2 to Processor 2. These options optimize PCIe bandwidth for high-performance NVMe workloads.

    • HPE NVMe CPU2 x6 CTRL Mode (P09657-B21)
    • HPE NVMe CPU1 x4/CPU2 x2 CTRL Mode (P09658-B21)
    HPE Apollo 4200 Gen10 NVMe Drives
    HPE Apollo 4200 Gen10 PCI Risers | 7 PCIe Slots

    There are 7 Total PCIe slots but Slots 4 and 5 are only available with the rear riser cage installed (P07248-B21). This Riser cage will provide 2 extra SFFs and 2 FHHL PCIe slots. When this Riser cage is installed PCIe slot 2 will not be available. This slot is where the riser cage sits.

    HPE Apollo 4200 Gen10 CTO Server 2 SFF 2 PCIe Riser

    2 SFF + 2FHHL Riser Kit (P07248-B21)

    Default Expansion Slots Expansion Slots # Technology Bus Width Connector Width Processor Slot Form Factor
    1 PCIe 3.0 x16 x16 CPU1 Low Profile
    2 PCIe 3.0 x24 x24 CPU1 Low Profile
    5 PCIe 3.0 x8 x8 CPU2 Low Profile
    6 PCIe 3.0 x24 x24 CPU2 Low Profile
    7 PCIe 3.0 x16 x16 CPU2 Low Profile
    2 SFF + 2FHHL Riser Kit Expansion Slots # Technology Bus Width Connector Width Processor Slot Form Factor
    3 PCIe 3.0 x16 x16 CPU1 Full-height; half length
    4 PCIe 3.0 x8 x8 CPU1 Full-height; half length
    HPE Apollo 4200 Gen10 Cooling | 10 Fans

    The HPE Apollo 4200 Gen10 server features an advanced cooling system to ensure efficient thermal management in its dense 2U form factor. The system is equipped with 10 hot-swappable fans as standard, which are strategically placed to deliver front-to-back airflow. These fans are essential for maintaining proper cooling, especially when components like drives, processors, and PCIe cards are fully populated

    HPE Apollo 4200 Gen10 CTO Server Cooling Fan Numbering with NVMe Rear Drives
    HPE NS204i-p NVMe OS Boot Device

    The HPE NS204i-p NVMe OS Boot Device is a dedicated hardware RAID 1 solution, specifically designed to ensure reliable and secure operating system boot functionality in the HPE Apollo 4200 Gen10 server. It features two M.2 NVMe SSDs configured in RAID 1, providing automatic mirroring for redundancy and fault tolerance. This device utilizes a PCIe3 x8 interface with x2 lanes, delivering high-speed boot performance while conserving valuable storage drive bays for data.

    HPE NS204i-p NVMe OS Boot Device
    HPE P824i-p MR Enablement Kit | 24 LFF Chassis Only

    The HPE P824i-p Smart Array Controller Enablement Kit (P11274-B21) supports up to 24 SAS/SATA drives in the 24 LFF chassis with 12G SAS lanes for high performance and advanced RAID (0, 1, 5, 6, 10, 50, 60) or JBOD flexibility. Featuring a 4 GB flash-backed write cache (FBWC) and integration with the HPE Smart Storage Battery, it enhances I/O performance while protecting data during power loss. With tools like HPE MR Storage Administrator and features for data integrity, it delivers reliable, efficient storage management for large-capacity workloads.

    HPE NS204i-p NVMe OS Boot Device

    View P824i-p MR Manual

    HPE Apollo 4200 Gen10 Flex Slot your power!

    Mixing of 2 different power supplies is NOT allowed.

    HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.

     

    Current Configuration

    HPE Chassis Options

    HPE Processors

    Memory LDIMM and RDIMM (Optional)

    HPE Persistent Memory (Optional)

    Bezel, Blanks, and more (Optional)

    Rear Drive Options (Optional)

    Rear Drive Cage Controllers (Optional)

    HPE LFF Drives SAS (3.5in) (Optional)

    HPE LFF Drives SATA (3.5in) (Optional)

    HPE SFF Drives SAS (2.5in) (Optional)

    HPE SFF Drives SATA (2.5in) (Optional)

    NVMe (Optional)

    M.2 Drives and Cards (Optional)

    Networking Adapters (Optional)

    FlexibleLOM (Optional)

    Host Bus Adapters (HBAs) (Optional)

    Storage Controller (Optional)

    InfiniBand (Optional)

    Accelerators (Optional)

    USB (Optional)

    iLO Server Management (Optional)

    Rail Kit (Optional)

    Power Supply Unit (PSU)

    Select Warranty

    *list also serves as quick links to each section

    Welcome to the Request Express Quoting Form!

    for: HPE Apollo 4200 Gen10 CTO Server


    This streamlined form is designed to simplify the quoting process for you. Whether you're uncertain about specific parts or seeking a hassle-free experience, you're in the right place.

    Provide us with the necessary details, and we'll generate a customized quote for your server. Even if you're unsure about the exact components you need, we've got you covered. Our team will tailor a solution based on the information you provide.

    Let's get started!
    Simply fill out the form, and we'll take care of the rest.


    Name *
    Email *
    Message *
    Preferred Brand
    Form Factor
    Rack Unit of Height (#U)
    Processor(s)
    Memory
    Total Amount of Memory
    Total Amount of Usable Storage

    Storage Type


    RAID

    List Networking Connection needed:
    Rack Space Restrictions
    Which OS do you plan on using:


    Price as Configured: 0

    Add to Cart

    Error Submitting Cart. Please get in touch with us for support.

    Please select all the mandatory items in the configuration list before submitting the cart.

    One or more items in your cart has no price. This will be submitted as a "Request for a Quote".

    Product Specs

    Shipping Information

    Express Computer Systems can ship to virtually any address in the world and provides you with the best shipping rates possible. Cost of shipping varies depending on what service you require, your destination and size of the shipment. Shipping costs will be calculated separately from your order and billed to you post purchase. In the notes section of your order please provide us with your preferred shipping method and we will get back to you.

    Custom configured orders ship within 2 business days after all required products are in stock.

    Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine, California.

    Domestic Shipments
    • Standard Ground
      • Shipping time: 2-7 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-10 business days
      • Excludes weekends, holidays or weather delays.
    • 3 Business Days
      • Shipping time: 3 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 3-6 business days
      • Excludes weekends, holidays or weather delays.
    • 2 Business Days
      • Shipping time: 2 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-5 business days
      • Excludes weekends, holidays or weather delays.
    • Overnight / Next Business Day
      • Shipping time: 1 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 1-4 business days
      • Excludes weekends, holidays or weather delays.
    International Shipments
    • International Economy
      • Shipping time: 4-6 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 5-9 business days
      • Excludes weekends, holidays or weather delays.
    • International Priority
      • Shipping time: 1-3 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-6 business days
      • Excludes weekends, holidays or weather delays.

    For more information on shipping view our Shipping Information page or send us a message

    Subscribe