Please remove $0 item(s) from cart - or - Request for Quote

This website performs best when viewed from a Desktop

All

  • All
  • AMD
  • APC
  • Avago
  • Brocade
  • Cisco
  • Dell
  • Dell CTO
  • ECS
  • EMC
  • EqualLogic
  • Express Computer Systems
  • Hitachi
  • HPE
  • Hynix
  • IBM
  • Intel
  • Mellanox
  • Micron
  • NetApp
  • Nvidia
  • OEM
  • Samsung
  • Seagate
  • Toshiba
  • Xilinx

    HPE Apollo 6500 Gen10 CTO System

    Brand:
    Type:
    CTO Servers
    Condition:
    ECS Refurbished & Tested
    -PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
    -SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.

    Multi-Quantity Discounts Available for ALL Line Items

    ** LARGE DISCOUNTS available for complete systems. Pricing displayed is for single item purchases **

    Use the configuration tool to create your solution and submit it us for a quote OR send us a message with your complete build requirements to receive best pricing

    READ ME

    • Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
    • “Submit for Quote” items can be added to your cart and sent to us via the cart page
    • Click the blue bar to close/open a section from view after choosing your options

    HPE Chassis

    This Chassis has two GPU Modules that can be installed. Up to 8 SXM2 GPU or 8 PCIe GPUs.
    Please choose the GPU Module Below. Mixing of GPU Types is not supported.

    HPE Processor

    Can Support up to 2 Processors.
    Mixing of processors is not supported.

    Gen1

    Gen2

    HPE Memory

    Speed will be based upon the Processors you select.

    GPU Module

    One 1 can be installed per server.

    GPU SXM2 (Optional)

    Supports up to 8 SXM2 GPUS
    Each GPU needs a HeatSink. 4 front 4 back.

    GPU PCIe (Optional)

    Supports up to 8 PCIe GPUs
    The PCIe GPUs support Topologies which can be selected below.

    GPU Topologies (Optional)

    Only supported with PCI GPUs
    Images of the GPU Topologies are above with some details of each below in the description.

    Drive Options (Optional)

    System supports 16 SFF Drives.
    If the NVMe drive cage is installed you MUST install the NVMe Enablement kit.

    HPE SFF Drives SAS (2.5in) (Optional)

    If SAS Drives are installed you will need to install a Smart Array.
    To save a PCIe slot this system supported FlexibleLOM Smart Arrays.

    HPE SFF Drives SATA (2.5in) (Optional)

    The S100i or the ACHI support SATA Drives.

    HPE NVMe Drives (Optional)

    The correct Drive cage must be installed to support NVMe Drives along with the NVMe Enablement kit.

    PCI Cards (Optional)

    The M.2 Riser sits in the primary slot and support 2 M.2 Drives that come with it.

    Networking Adapters (Optional)

    FlexibleLOM (Optional)

    These do not take up a PCIe slot. Recommeneded configuration for expanding the Networking abilities of the server.

    Host Bus Adapters (HBAs) (Optional)

    Storage Controller (Optional)

    InfiniBand Adapters (Optional)

    iLO Server Management (Optional)

    Rail Kit (Optional)

    Power Supply Unit (PSU)

    Select Warranty

    Helpful Tip: Once desired configuration is selected click "Add to Cart". From the cart page you can submit a submit a quote request for best pricing

    What's New for Apollo 6500 Gen10
    • (1) XL270d Gen 10 Trays | P00392-B21
    • (2) Intel Xeon 1st or 2nd Gen Scalable Processors Per Tray
    • (24) 2933MT/s DDR4 DIMMs
    • (16) SFF Drives
    • Up to (4) NVMe Drives Supported
    • (1) PCIe Slots Per XL270d Tray
    • Embedded 4 x 1GbE Network Adapter
    • Support for FlexibleLOM Adapters
    • Support for Type-A Smart Array Controllers
    • Supports (2) GPU Module Options (SMX2 or PCIe)
    • (8) GPUs Supported Per GPU Module
    • *(12) T4 GPU can be supported (PCIe GPU Module only)
    • (4) PCIe Slots Per GPU Module
    • Support for NVLink with the latest NVIDIA GPU
    • HPE iLO 5

    The HPE Apollo 6500 Gen10 Server is specifically designed for HPC, AI, Deep Learning (DL), and Machine Learning (ML) applications. It features the robust 6500 chassis, which integrates the XL270d Gen10 system board with a GPU module stacked on top, ensuring optimal performance for intensive computational workloads. The server supports up to 16 drives on its 2-socket, 24-DIMM system tray, allowing for extensive storage and memory capacity. The Apollo Power Distribution Unit (PDU) houses the midplanes, efficiently connecting the entire system to deliver seamless integration and exceptional power management for demanding workloads.

    Ideal for:

    • Artificial Intelligence (AI)
    • Big Data Analytics
    • Data Analytics
    • Deep Learning (DL)
    • High-Performance Computing (HPC)
    • Language Model
    • Machine Learning (ML)

    CTO Configuration Support

    Need help with the configuration? Contact us today!

    Chassis & Tray Options
    HPE ProLiant XL270d Gen 10 Tray (P00392-B21)

    The HPE Apollo 6500 Gen10 Server's system tray, positioned beneath the GPU module, is a powerhouse of performance and flexibility. It supports two CPUs and 24 DIMMs, offering extensive computational and memory capacity. The XL270d system board includes a dedicated FlexibleLOM for customizable networking, internal M.2 drives for high-speed boot or cache storage, a Type-A Smart Array controller, and one PCIe slot for expansion. By default, the system features three SATA ports, enabling support for up to 12 SATA drives across two drive bays. For networking, it integrates four embedded 1GbE RJ-45 ports, ensuring robust connectivity for high-performance workloads.

    HPE Apollo 6500 Gen10 Tray - P00392-B21
    Maximum Internal Storage
    Drive Capacity Configuration
    Hot Plug SFF SAS SSD 244 TB 16 x 15.3 TB
    Hot Plug SFF SATA SSD 122 TB 16 x 7.68 TB
    Hot Plug SFF NVMe SSD 30.7 TB NVMe 4 x 7.68 TB
    Notes: 2x m.2 drives are supported

    HPE Apollo 6500 Gen10 M.2 Drives

    The default S100i Controller uses 14 embedded SATA lanes, but only 12 lanes on 3 ports are accessible as 2 lanes are leveraged to support the 2 M.2 options on the primary riser. That primary riser is the HPE Apollo PCIe/SATA M.2 FIO Riser Kit (863661-B22).

    HPE Apollo 6500 Gen10 M.2 Riser Card

    PCIe Slot Information
    System Board
    Slot # Technology Bus Width Connector Width Slot Form Factor Notes
    21 PCIe 3.0 X16 X16 Full-height, half-length slot Proc 2
    HPE GPU Modules

    The Manuals from HPE are lacking tremendously with GPU information. Please take your time when reading the manuals. Below is a summary of what we have found.

    HPE Apollo 6500 Gen10 PCIe GPUHPE 8 GPU PCIe
    v1 (P03032-B22) or v2 (P13153-B22)

    Only (1) version is supported at a time

    Supports up to (8) GPUs

    NOTE* Supportes up to (12) Tesla T4

    Up to 4 high speed fabric adapters

    Four topologies with NVLink

    4:1 or 8:1 topology (PCI GPU only)

    HPE SXM2 6500 gen 10 apollo 8 SXM2 GPU
    (P03032-B22) - (P03727-001)

    Supports up to (4 or 8) SXM2 GPUs

    Each Heatsink supports 4 NVLink SXM-2 GPU

    Mixing GPUs is not supported

    Up to (4) PCIe slots

    The SXM2 Section from the Quick Specs manual has been removed. Not sure why but most this information is from the older 2018 manauals.

    SXM-2 GPU Module
    Slot # Technology Bus Width Connector Width Slot Form Factor Notes
    11 PCIe 3.0 X16 X16 Full-height, half-length slot Proc 1
    12 PCIe 3.0 X16 X16 Full-height, half-length slot Proc 1
    9 PCIe 3.0 X16 X16 Full-height, half-length slot Proc 2
    10 PCIe 3.0 X16 X16 Full-height, half-length slot Proc 2
    PCIe GPU Module
    Slot # Technology Bus Width Connector Width Slot Form Factor Notes
    11 PCIe 3.0 X16 X16 Full-height, half-length slot Dependent on topology selected in BIOS. See User and Administrator Guide for full details
    12 PCIe 3.0 X16 X16 Full-height, half-length slot
    9 PCIe 3.0 X16 X16 Full-height, half-length slot
    10 PCIe 3.0 X16 X16 Full-height, half-length slot

    Please view the manual for all the topology information.

    Storage Controllers

    The HPE Apollo 6500 Gen10 Server comes with three SATA ports, which support up to 12 SATA drives across two drive bays. To use SAS drives, a Smart Array Adapter is required. HPE recommends installing the Type-A Adapter for this purpose, as it conserves the server's PCIe slot for other expansions, such as NVMe drives.

    HPE Apollo 6500 Gen10 Type-A Storage Controllers
    NVMe Drives

    For NVMe storage, an NVMe Enablement Kit must be installed. This kit occupies the PCIe slot on the system tray and connects to the NVMe port on the tray. Additionally, the NVMe Midplane needs to be installed to provide the data path to the backplanes. The server supports a maximum of four NVMe drives, offering high-speed storage capabilities ideal for performance-intensive workloads.

    HPE Apollo 6500 Gen10 NVMe Enablement Kit
     

    Current Configuration

    HPE Chassis

    HPE Processor

    HPE Memory

    GPU Module

    GPU SXM2 (Optional)

    GPU PCIe (Optional)

    GPU Topologies (Optional)

    Drive Options (Optional)

    HPE SFF Drives SAS (2.5in) (Optional)

    HPE SFF Drives SATA (2.5in) (Optional)

    HPE NVMe Drives (Optional)

    PCI Cards (Optional)

    Networking Adapters (Optional)

    FlexibleLOM (Optional)

    Host Bus Adapters (HBAs) (Optional)

    Storage Controller (Optional)

    InfiniBand Adapters (Optional)

    iLO Server Management (Optional)

    Rail Kit (Optional)

    Power Supply Unit (PSU)

    Select Warranty

    *list also serves as quick links to each section

    Welcome to the Request Express Quoting Form!

    for: HPE Apollo 6500 Gen10 CTO System


    This streamlined form is designed to simplify the quoting process for you. Whether you're uncertain about specific parts or seeking a hassle-free experience, you're in the right place.

    Provide us with the necessary details, and we'll generate a customized quote for your server. Even if you're unsure about the exact components you need, we've got you covered. Our team will tailor a solution based on the information you provide.

    Let's get started!
    Simply fill out the form, and we'll take care of the rest.


    Name *
    Email *
    Message *
    Preferred Brand
    Form Factor
    Rack Unit of Height (#U)
    Processor(s)
    Memory
    Total Amount of Memory
    Total Amount of Usable Storage

    Storage Type


    RAID

    List Networking Connection needed:
    Rack Space Restrictions
    Which OS do you plan on using:


    Price as Configured: 0

    Add to Cart

    Error Submitting Cart. Please get in touch with us for support.

    Please select all the mandatory items in the configuration list before submitting the cart.

    One or more items in your cart has no price. This will be submitted as a "Request for a Quote".

    Product Specs

    Shipping Information

    Express Computer Systems can ship to virtually any address in the world and provides you with the best shipping rates possible. Cost of shipping varies depending on what service you require, your destination and size of the shipment. Shipping costs will be calculated separately from your order and billed to you post purchase. In the notes section of your order please provide us with your preferred shipping method and we will get back to you.

    Custom configured orders ship within 2 business days after all required products are in stock.

    Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine, California.

    Domestic Shipments
    • Standard Ground
      • Shipping time: 2-7 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-10 business days
      • Excludes weekends, holidays or weather delays.
    • 3 Business Days
      • Shipping time: 3 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 3-6 business days
      • Excludes weekends, holidays or weather delays.
    • 2 Business Days
      • Shipping time: 2 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-5 business days
      • Excludes weekends, holidays or weather delays.
    • Overnight / Next Business Day
      • Shipping time: 1 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 1-4 business days
      • Excludes weekends, holidays or weather delays.
    International Shipments
    • International Economy
      • Shipping time: 4-6 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 5-9 business days
      • Excludes weekends, holidays or weather delays.
    • International Priority
      • Shipping time: 1-3 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-6 business days
      • Excludes weekends, holidays or weather delays.

    For more information on shipping view our Shipping Information page or send us a message

    Subscribe