Please remove $0 item(s) from cart - or - Request for Quote

This website performs best when viewed from a Desktop

All

  • All
  • AMD
  • APC
  • Avago
  • Brocade
  • Cisco
  • Dell
  • Dell CTO
  • ECS
  • EMC
  • EqualLogic
  • Express Computer Systems
  • Hitachi
  • HPE
  • Hynix
  • IBM
  • Intel
  • Mellanox
  • Micron
  • NetApp
  • Nvidia
  • OEM
  • Samsung
  • Seagate
  • Toshiba
  • Xilinx

    HPE Apollo 4200 Gen9 CTO Server

    Brand:
    Type:
    CTO Servers
    Condition:
    ECS Refurbished & Tested
    -PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
    -SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.

    Multi-Quantity Discounts Available for ALL Line Items

    ** LARGE DISCOUNTS available for complete systems. Pricing displayed is for single item purchases **

    Use the configuration tool to create your solution and submit it us for a quote OR send us a message with your complete build requirements to receive best pricing

    READ ME

    • Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
    • “Submit for Quote” items can be added to your cart and sent to us via the cart page
    • Click the blue bar to close/open a section from view after choosing your options

    HPE Chassis

    HPE Processors

    Intel Xeon E5-2600v3

    Supports up to 2 processors

    Intel Xeon E5-2600v4

    Supports up to 2 processors

    Bezel, Blanks, and Cables (Optional)

    Memory E5-2600v3 (Optional)

    Supports 8 DIMMs per Processors with a total 16 DIMMs

    Memory E5-2600v4 (Optional)

    Supports 8 DIMMs per Processors with a total 16 DIMMs

    Drive Options (Optional)

    3 Rear Drive options

    HPE LFF Drives SAS (3.5in) (Optional)

    Not all drives can be installed in the rear drive.
    Only the LP HDD drives are supported in the rear Drive Cage.

    HPE LFF Drives SATA (3.5in) (Optional)

    Not all drives can be installed in the rear drive.
    Only the LP HDD drives are supported in the rear Drive Cage.

    HPE SFF Drives SAS (2.5in) (Optional)

    Not all drives can be installed in the rear drive.
    If the Drive says "NON-Rear" those drives can't be installed in a rear-drive cage.

    HPE SFF Drives SATA (2.5in) (Optional)

    Not all drives can be installed in the rear drive.
    If the Drive says "NON-Rear" those drives can't be installed in a rear-drive cage.

    Rear Storage Modes (Optional)

    Only 1 Storage Mode can be supprted at a time.
    Please view each MODE for requirements and limitations.

    Cooling (Optional)

    Please read up on the cooling section to understand the fan options of redundancy.

    Networking Adapters (Optional)

    FlexibleLOM (Optional)

    There is 1 Dedicated LOM slot in the rear of the XL420 Motherboard.

    Host Bus Adapters (HBAs) (Optional)

    Storage Controller (Optional)

    InfiniBand (Optional)

    Accelerators (Optional)

    USB (Optional)

    iLO Server Management (Optional)

    Rail Kit (Optional)

    Power Supply Unit (PSU)

    All power supplies must be of the same input voltage, output rating, and efficiency rating. If non-matching power supplies are installed, you may receive an error message and/or experience operational issues with your server.

    Select Warranty

    Helpful Tip: Once desired configuration is selected click "Add to Cart". From the cart page you can submit a submit a quote request for best pricing

    What's New for Apollo 4200 Gen9
    • 2U (28 LFF or 54 SFF) Chassis Options
    • Optional rear drive up to 6 SFF or 4 LFF
    • (2) Intel Xeon E5-2600 v3 or v4 processors
    • (16) 2400MT/s DDR4 DIMMs | 8 DIMMs per processor
    • Supports up to 1.5 TB of DDR4 memory
    • (7) PCIe 3.0 slots
    • HPE's Silicon Root of Trust
    • HPE iLO 4
    • No NVMe Support
    • No GPU Supported

    The HPE Apollo 4200 Gen9 Server combines high storage density and robust performance in a 2U form factor. It supports up to 28 LFF or 54 SFF hot-plug drives, providing industry-leading capacity for data-intensive workloads. With the LFF chassis, users can achieve up to 224 TB of storage using 8 TB drives, scaling to over 4.4 PB in a standard 42U rack. For high-performance applications, the SFF chassis supports up to 54 SAS or SSD drives with 12 Gb/s throughput, ideal for Hadoop, content delivery, and object storage workloads. Its efficient design and management features make it a standout solution for modern enterprise storage needs.

    The HPE Apollo 4200 Gen9 Server does not natively support GPU accelerators in its standard configuration. It is primarily designed for storage-dense workloads and high-capacity data applications like Hadoop, object storage, and content delivery, rather than compute-intensive tasks that require GPUs.

    Ideal for:

    • Big Data Analytics
    • Cloud Servers
    • Data Analytics
    • Video Streaming

    CTO Configuration Support

    Need help with the configuration? Contact us today!

    Chassis Options
    HPE Apollo 4200 Gen9 LFF 808027-B21 Chassis Apollo 4200 Gen9 LFF
    808027-B21
    Rear Drive Options
    • 4LFF Rear Cage Kit (806563-B21)
    • 2SFF Rear Cage Kit (806564-B21)
    Maximum Internal Storage | LFF
    • SAS 392TB (24+4) x 14TB
    • SAS SSD 41.5TB (24) x 1.6TB + (4) x 800GB
    • SATA 108TB (48+6) x 2TB
    • SATA SSD 414.72TB (48+6) x 7.68TB

    Dimensions: (H) x (W) x (D)
    • 3.44 x 17.63 x 32 in
    • 8.75cm x 44.8 x 81.28 cm
    Weight:
    • Min: 51.04 lb (23.2 kg)
    • Max: 89.32 lb (40.6 kg)
    HPE Apollo 4200 Gen9 SFF 808028-B21 Chassis Apollo 4200 Gen9 SFF
    808028-B21
    Rear Drive Options
    • 2SFF Rear Cage Kit (806564-B21)
    • 6SFF Rear Cage Kit (838833-B21)
    Maximum Internal Storage | SFF
    • SAS 129.6TB (48+6) x 2.4TB
    • SAS SSD 740TB (48) x 15.3TB + (6) x 960GB
    • SATA 108TB (48+6) x 2TB
    • SATA SSD 414.72TB (48+6) x 7.68TB

    Dimensions: (H) x (W) x (D)
    • 3.44 x 17.63 x 32 in
    • 8.75cm x 44.8 x 81.28 cm
    Weight:
    • Min: 46.64 lb (21.2 kg)
    • Max: 77lb (35kg)
    HPE Apollo 4200 Gen9 LFF CTO Server HPE Apollo 4200 Gen9 SFF CTO Server
    SKU Number 808027-B21 808028-B21
    Processor 2 (optional) x HPE Smart Socket Guide
    DIMM Slots 16 DIMM slots for RDIMM, LRDIMM DDR4 Memory
    Storage Controller HPE Smart Array P840ar, plus HPE Dynamic Smart Array B140i , optional HPE Flexible Smart Array or
    Smart HBA controller
    PCIe 2 PCIe slots and FlexibleLOM (Plus FHHL Riser option+3 PCI slots available with upgrade to second
    processor)
    Drive Cage 24 LFF Hot Plug and optional 4LFF Rear Cage Kit, ,
    2SFF Rear Cage Kit, or 6SFF Rear Cage Kit
    48 SFF Hot Plug and optional 2 SFF Rear Cage Kit
    or 6 SFF Rear Cage Kit
    Network Controller HPE Embedded 1Gb Ethernet 2-port 361i Adapter, plus optional HPE FlexibleLOM or stand up card
    Fans 4 fans standard for 1P, 5 fans standard for 2P, plus redundant fan option 4 fans standard for 1P, 5 fans standard for 2P, plus
    redundant fan option
    Management iLO Management (standard), Intelligent Provisioning (standard), iLO Advanced (optional), Insight Control
    (optional)
    USB 1 front, 2 rear, 1 internal 1 front, 2 rear, 1 internal
    Processors & Memory

    The HPE ProLiant XL420 Gen9 Motherboard, integrated into the Apollo 4200 rack server, supports up to two Intel Xeon E5-2600 v3 or v4 processors, delivering scalable performance for enterprise workloads. Processor mixing is not supported, ensuring consistent and reliable operation. Each processor socket supports 8 DIMMs, for a total of 16 DIMMs and up to 1.0 TB of DDR4 SmartMemory, with speeds of up to 2400 MT/s, depending on the configuration.

    Installing both processors unlocks additional expansion with PCIe slots 5, 6, and 7, offering flexibility for networking or storage upgrades. For enhanced expandability, the optional 2 SFF and 2 Full-Height Half-Length Riser Kit (806564-B21) enables PCIe slots 3 and 4 by utilizing slot 2 as a standup expansion, disabling it in the process.

    HPE Smart Storage Dual-Controller | B140i & P840ar

    Apollo 4200 has the P840ar embedded in the chassis by default, including the HPE Smart Storage Battery. It also has the B140i Controller embedded in the system that only works in UEFI mode. The B140i will not operate in Legacy mode. Users can choose between the hardware RAID (P840ar) for advanced features and performance or the software RAID (B140i) for simpler configurations.

    HPE Apollo 4200 Gen9 p840ar Controller

    Please read the controller Modes below for more insight into the Advanced Configurations and their requirments.


    Controller Modes

    The (5) Controller modes provide different methods to controlling the drive bays. There are 2 Front Drive Bays and 1 optional rear drive bay with 3 different options. If you install a rear drive option, one of the controller modes below must be selected. To make life easy we have placed the supported Controller modes under each rear drive cage.


    Below we have added some quick notes about drive allocation when installing a controller mode.
    Please read the manual for all the details into the controller mode.


    HPE SAS Smart Array P440 CTRL Mode
    Rear Storage (838830-B21)

    The Rear HDDs will be under the optional HPE Smart Array P440/4GB FBWC 12Gb 1-port Int SAS Controller (726821-B21)

    HPE Dual SAS Smart Array P440 CTRL Mode
    Front Storage (P03845-B21)

    The Rear HDDs will be under the default HPE Flexible Smart Array P840ar/2G FIO Controller and the two front HDD cage will be under the two optional HPE Smart Array P440/4GB FBWC 12Gb 1-port Int SAS Controller (726821-B21)

    HPE Apollo 4200 Gen9 Plus PCI Risers

    The Rack server holds 7 PCIe 3.0 Slots on the 2U chassis.
    The second processor must be installed to enable the use of the PCIe slots 5, 6, & 7.

    Expansion Slots Slot # Technology Bus Width Connector Width Form Factor Notes
    CPU1, (STANDARD) 1 PCIe 3.0 x8 x8 Low Profile Proc 1
    2 PCIe 3.0 x16 x16 Low Profile Proc 1
    Slots with 2 PCIe FHHL riser (CPU1)
    (Optional 2SFF and 2 FHHL Kit: (806564-B21)
    3 PCIe 3.0 x8 x8 Full-height, half-length slot Proc 1
    4 PCIe 3.0 x8 x8 Full-height, half-length slot Proc 1
    Notes: Using the optional FHHL kit (PN: 806564-B21), the two PCIe slots (slots 3 and 4) are available by using slot 2 as a standup expansion slot, so slot 2 is not available.
    Notes: PCIe slots 1-4 are associated with processor 1.
    CPU 2 (Optional) 5 PCIe 3.0 x16 x16 Low Profile Proc 2
    6 PCIe 3.0 x8 x8 Low Profile Proc 2
    7 PCIe 3.0 x16 x16 Low Profile Proc 2
    Networking Abilities | FlexibleLOM

    With 7 PCIe slots and 1 Dedicated FlexibleLOM PCIe slot supporting 1Gb or 10Gb networking. The combination of FlexibleLOM, integrated NICs, and PCIe networking adapters makes the Apollo 4200 Gen9 server highly adaptable for a wide range of networking demands, from standard enterprise applications to high-performance computing environments.

    The FlexLOM can only be installed in PCIe Slot 1.

    HPE Apollo 4200 Gen9 FlexLom Networking Adapter
    HPE Apollo 4200 Gen9 Cooling

    HPE Apollo 4200 Gen9 Redundant Fan Kit (806562-B21). For 1 processor configuration, the Redundant Fan Kit (806562-B21) will ship 4 additional fans, for a total of 8 fans. There will be one spare fan in the carton for the future upgrade to 2 processors. For 2 processor configurations, the HPE Apollo 4200 Gen9 Redundant Fan Kit (806562-B21) will ship 5 fans for redundant function.

    System Fans Non-Redundant Redundant
    When 1 Processor is selected 4 fans 8 fans
    When 2 Processors are selected 5 fans 10 fans
    HPE Apollo 4200 Gen9 Fan Numbering
    HPE Power Supply Units (PSU)

    The HPE Apollo 4200 Gen9 server features hot-swappable Flex Slot PSUs available in 500W, 800W, 1400W, and 1600W capacities, offering scalability and redundancy for high-availability environments. These PSUs, certified with 80 PLUS Platinum or Titanium for energy efficiency, are compact and modular, saving space and reducing operational costs. To maintain proper cooling and performance, specific PSU wattages may require additional fan configurations.

    All power supplies must be of the same input voltage, output rating, and efficiency rating. If non-matching power supplies are installed, you may receive an error message and/or experience operational issues with your server.

    HPE Apollo 4200 Gen9 Power Supply Units
    HPE IntegratedLights Out! | HPE iLO 4
    Integrated Lights-Out (iLO)

    Monitor your servers for ongoing management, service alerting, reporting, and remote management with HPE iLO.

    UEFI

    Configure and boot your servers securely with industry-standard Unified Extensible
    Firmware Interface (UEFI).

    RESTful API

    iLO RESTful API is Redfish API conformance and offers simplified server management automation such as configuration and maintenance tasks based on modern industry standards.

    Intelligent Provisioning

    Hassle-free server and OS provisioning for 1 or few servers with Intelligent Provisioning.

     

    Current Configuration

    HPE Chassis

    HPE Processors

    Bezel, Blanks, and Cables (Optional)

    Memory E5-2600v3 (Optional)

    Memory E5-2600v4 (Optional)

    Drive Options (Optional)

    HPE LFF Drives SAS (3.5in) (Optional)

    HPE LFF Drives SATA (3.5in) (Optional)

    HPE SFF Drives SAS (2.5in) (Optional)

    HPE SFF Drives SATA (2.5in) (Optional)

    Rear Storage Modes (Optional)

    Cooling (Optional)

    Networking Adapters (Optional)

    FlexibleLOM (Optional)

    Host Bus Adapters (HBAs) (Optional)

    Storage Controller (Optional)

    InfiniBand (Optional)

    Accelerators (Optional)

    USB (Optional)

    iLO Server Management (Optional)

    Rail Kit (Optional)

    Power Supply Unit (PSU)

    Select Warranty

    *list also serves as quick links to each section

    Welcome to the Request Express Quoting Form!

    for: HPE Apollo 4200 Gen9 CTO Server


    This streamlined form is designed to simplify the quoting process for you. Whether you're uncertain about specific parts or seeking a hassle-free experience, you're in the right place.

    Provide us with the necessary details, and we'll generate a customized quote for your server. Even if you're unsure about the exact components you need, we've got you covered. Our team will tailor a solution based on the information you provide.

    Let's get started!
    Simply fill out the form, and we'll take care of the rest.


    Name *
    Email *
    Message *
    Preferred Brand
    Form Factor
    Rack Unit of Height (#U)
    Processor(s)
    Memory
    Total Amount of Memory
    Total Amount of Usable Storage

    Storage Type


    RAID

    List Networking Connection needed:
    Rack Space Restrictions
    Which OS do you plan on using:


    Price as Configured: 0

    Add to Cart

    Error Submitting Cart. Please get in touch with us for support.

    Please select all the mandatory items in the configuration list before submitting the cart.

    One or more items in your cart has no price. This will be submitted as a "Request for a Quote".

    Product Specs

    Shipping Information

    Express Computer Systems can ship to virtually any address in the world and provides you with the best shipping rates possible. Cost of shipping varies depending on what service you require, your destination and size of the shipment. Shipping costs will be calculated separately from your order and billed to you post purchase. In the notes section of your order please provide us with your preferred shipping method and we will get back to you.

    Custom configured orders ship within 2 business days after all required products are in stock.

    Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine, California.

    Domestic Shipments
    • Standard Ground
      • Shipping time: 2-7 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-10 business days
      • Excludes weekends, holidays or weather delays.
    • 3 Business Days
      • Shipping time: 3 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 3-6 business days
      • Excludes weekends, holidays or weather delays.
    • 2 Business Days
      • Shipping time: 2 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-5 business days
      • Excludes weekends, holidays or weather delays.
    • Overnight / Next Business Day
      • Shipping time: 1 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 1-4 business days
      • Excludes weekends, holidays or weather delays.
    International Shipments
    • International Economy
      • Shipping time: 4-6 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 5-9 business days
      • Excludes weekends, holidays or weather delays.
    • International Priority
      • Shipping time: 1-3 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-6 business days
      • Excludes weekends, holidays or weather delays.

    For more information on shipping view our Shipping Information page or send us a message

    Subscribe