HPE Apollo 4200 Gen10 24 LFF Server Chassis | P07244-B21

24 LFF

48 SFF

HPE Smart Array E208i-a SR G10 LH controller

HPE Smart Array E208i-p SR Gen10 controller

HPE Smart Array E208e-p SR Gen10 controller

HPE Smart Array P408i-a SR G10 LH controller

HPE Smart Array P408i-p SR Gen10 controller

HPE Smart Array P408e-p SR Gen10 controller

HPE Smart Array P816i-a SR G10 LH controller

HPE Smart Array P824i-p MR Gen10 controller

Hard drives

None ship standard

HPE 800 W flex slot platinum Hot-Plug low halogen power supply kit.

HPE 1600 W flex slot platinum Hot-Plug low halogen power supply kit.

Advanced Configuration and Power Interface (ACPI) 6.1 compliant

Peripheral Component Interconnect express (PCIe) 3.0 compliant

Wake-on-LAN (WOL) support

Microsoft logo certifications

Preboot eXecution Environment (PXE) support

USB 3.0 compliant

USB 2.0 compliant

System Management BIOS (SMBIOS) 3.1

Unified Extensible Firmware Interface (UEFI) 2.6

Redfish API

Intelligent Platform Management Interface (IPMI) 2.0

Secure digital 4.0

Trusted Platform Module (TPM) 2.0 support

Advanced Encryption Standard (AES)

Triple Data Encryption Standard (3DES)

Simple Network Management Protocol (SNMP) v3

Transport Layer Security (TLS) 1.2

DMTF Systems Management Architecture for Server Hardware Command Line (SMASH CLP)

Active directory v1.0

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) A3/A4

Energy star

Integrated video standard

HPE iLO 5 on system management memory

Secure boot and secure start enable for enhanced security.

Operating System (OS) specific functionality.

Support for > 2.2TB (Using GUID Partition Table (GPT)) boot drives.

USB 3.0 stack

Embedded UEFI shell

Mass configuration deployment tool using iLO RESTful API that is Redfish API conformant.

PXE boot support for IPv6 networks

Workload profiles for simple performance optimization.

UEFI boot mode only

TPM 2.0 support

NVMe boot support

Platform Trust Technology (PTT) can be enabled.

iSCSI software initiator support

HTTP/HTTPs boot support as a PXE alternative.

Boot support for option cards that only support a UEFI option ROM.

HPE Integrated Lights-Out (HPE iLO)

UEFI

Intelligent provisioning

iLO RESTful API

Active Health System (AHS)

AHS viewer

Smart update

iLO amplifier pack

HPE iLO mobile application

RESTful interface tool

Scripting tools

HPE OneView standard

HPE Systems Insight Manager (HPE SIM)

UEFI secure boot and secure start support

Immutable silicon root of trust

FIPS 140-2 validation

Common criteria certification

Configurable for PCI DSS compliance

Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser.

Support for Commercial National Security Algorithms (CNSA).

iLO security modes including a new iLO advanced premium security license.

Granular control over iLO interfaces

Smart card (PIV/CAC) and kerberos based 2-factor authentication.

Tamper-Free updates - Components digitally signed and verified.

Secure recovery - Recover critical firmware to known good state on detection of compromised FW.

Ability to rollback firmware

Secure erase of NAND

TPM 2.0 option

Bezel locking kit

Windows Server 2016 (Most recent version)

VMware ESXi 6.0 U3

VMware ESXi 6.5 and U2 upon release

VMware ESXi 6.7 and U1 upon release

Red Hat Enterprise Linux (RHEL) 7.64

SUSE Linux Enterprise Server (SLES) 12 64-bit SP3 and 15 64-bit SP1

Ubuntu 16.04 and 18.04

Oracle Linux ver. 7.6

ClearOS¹

CentOS²

Minimum: 22.34 kg (49.25 lb)

Maximum: 40.60 kg (89.51 lb)

100 to 120 V ac

200 to 240 V ac

For 1600 W power supply: 1600 W (At 240 V ac), 1600 W (At 240 V dc) for China only

For 800 W power supply: 800 W (At 100 V ac), 800 W (At 240 V ac), 800 W (At 240 V dc) input for China only

10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate of change may be limited by the type and number of options installed

System performance during standard operating support may be reduced if operating with a fan fault or above 30°C (86°F)

For approved hardware configurations, the supported system inlet range is extended to be: 5° to 10°C (41° to 50°F) and 35° to 40°C (95° to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft)

For approved hardware configuration for the system listed at the below url:

Click here to access the Hewlett Packard Enterprise Information Library .

For approved hardware configurations, the supported system inlet range is extended to be: 40° to 45°C (104° to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft)

For approved hardware configuration for the system listed at the below url:

Click here to access the Hewlett Packard Enterprise Information Library .

System performance may be reduced if operating in the extended ambient operating range or with a fan fault

Operating: 8% to 90% - Rh, 28°C (82.4°F) maximum wet bulb temperature, Non-Condensing

Non-Operating: 5% to 95% Rh, 38.7°C (101.7°F) maximum wet bulb temperature, Non-Condensing

Operating: 3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min)

Non-Operating: 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min)