Please remove $0 item(s) from cart - or - Request for Quote

This website performs best when viewed from a Desktop

All

  • All
  • AMD
  • APC
  • Avago
  • Brocade
  • Cisco
  • Dell
  • Dell CTO
  • ECS
  • EMC
  • EqualLogic
  • Express Computer Systems
  • Hitachi
  • HPE
  • Hynix
  • IBM
  • Intel
  • Mellanox
  • Micron
  • NetApp
  • Nvidia
  • OEM
  • Samsung
  • Seagate
  • Toshiba
  • Xilinx

    HPE Apollo 4200 Gen10 PLUS CTO Server

    Brand:
    Type:
    CTO Servers
    Condition:
    ECS Refurbished & Tested
    -PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
    -SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.

    Multi-Quantity Discounts Available for ALL Line Items

    ** LARGE DISCOUNTS available for complete systems. Pricing displayed is for single item purchases **

    Use the configuration tool to create your solution and submit it us for a quote OR send us a message with your complete build requirements to receive best pricing

    READ ME

    • Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
    • “Submit for Quote” items can be added to your cart and sent to us via the cart page
    • Click the blue bar to close/open a section from view after choosing your options

    HPE Chassis

    HPE Processors

    The XL420r Motherboard can support up to 2 CPUs

    Platinum

    Gold

    Silver

    Bezel, Blanks, and more (Optional)

    Memory

    Please read the spec manual for all the Memory rules and requirements.
    There are a lot of rules for PMEM, make sure you have read up on them before adding them to the system.

    Drive Options (Optional)

    SFF Drive Cage 3, 4, and 5 support SSD only

    Drive Cage 1 and 2 Controllers (Optional)

    Each Cage requires one controller Mode.

    Drive Cage 3 Cables and Controllers (Optional)

    Only 1 optional drive cage can be installed in Cage 3 location
    One of the Drive Cage 3 Cables and Controller mode must be selected when any Drive Cage 3 Upgrade SKU is selected.
    SFF Drive Cage 3, 4, and 5 support SSD only

    Drive Cage 4 and 5 Cables (Optional)

    Each Cage requires one of the Drive Cage 4 and Cage 5 Cables.
    SFF Drive Cage 3, 4, and 5 support SSD only

    HPE LFF Drives SAS (3.5in) (Optional)

    Supports up to 24 LFF

    HPE LFF Drives SATA (3.5in) (Optional)

    Supports up to 24 LFF

    HPE NVMe Drives (Optional)

    SFF NVMe PCIe SSD is only supported in the optional SFF Dirve Cage 3, 4, or 5

    PCI Riser Options (Optional)

    M.2 Drives (Optional)

    Networking Adapters (Optional)

    OCP (Optional)

    Host Bus Adapters (HBAs) (Optional)

    Storage Controller (Optional)

    InfiniBand (Optional)

    GPU (Optional)

    USB (Optional)

    The DVD-RW is only supported on USB 3.0 ports.

    iLO Server Management (Optional)

    Rail Kit (Optional)

    Power Supply Unit (PSU)

    Select a minimum (1), maximum (2) power supplies.

    Select Warranty

    Helpful Tip: Once desired configuration is selected click "Add to Cart". From the cart page you can submit a submit a quote request for best pricing

    What's New for Apollo 4200 Gen10
    • 2U (28 LFF or 60 SFF) Chassis Options
    • 3 Front Facing Drive Cages
    • Optional rear drive up to 6 SFF/NVMe or 4 LFF
    • (2) Intel Xeon 3rd Gen Scalable processors
    • (24) 3200MT/s DDR4 DIMMs | 12 DIMMs per processor
    • HPE Persistent Memory Support
    • Supports up to 4.0TB of DDR4 memory
    • Tri-Mode Controller Support
    • OCP 3.0 Support
    • (6) PCIe 4.0 slots
    • HPE iLO 5
    • NVMe U.3 Drives Support (Dirve Cage 3, 4, or 5)
    • GPU Supported

    The HPE Apollo 4200 Gen10 Plus Server combines cutting-edge technology with exceptional storage density and performance in a 2U form factor, purpose-built for data-intensive workloads. It supports up to three front-facing drive cages, accommodating 28 LFF or 60 SFF hot-plug drives, including NVMe, SAS, and SATA options. This configuration provides up to 560 TB of storage with 20 TB drives, scaling to over 11 PB in a 42U rack.

    Powered by 3rd Generation Intel® Xeon® Scalable processors with up to 32 cores per CPU, the server delivers enhanced compute capabilities. It supports up to 24 DDR4 DIMM slots for a maximum of 4 TB of memory at 3200 MT/s. With six PCIe Gen4 slots, the system offers increased I/O bandwidth, enabling high-speed connectivity and expansion for accelerators, storage controllers, and networking.

    The HPE Apollo 4200 Gen10 Plus introduces a balanced architecture, improved thermal efficiency, and support for select GPU and FPGA accelerators, ensuring it excels in modern workloads like AI, machine learning, big data analytics, and hyperconverged infrastructure.

    Ideal for:

    • Artificial Intelligence (AI)
    • Big Data Analytics
    • Data Analytics
    • Database
    • Deep Learning (DL)
    • High-Performance Computing (HPC)
    • Hyper-Converged infrastructure (HCI)
    • Language Model
    • Machine Learning (ML)
    • Video Analytics
    • Video Streaming
    • Virtualization

    CTO Configuration Support

    Need help with the configuration? Contact us today!

    Chassis Options
    HPE Apollo 4200 Gen10 Plus 24LFF Chassis System | P28700-B21 24LFF Chassis System (P28700-B21)
    Drive Cage Options
    • 4LFF Drive Cage 3 (P28702-B21)
    • 8SFF Drive Cage 3 (P28703-B21)
    • 2SFF Drive Cage 4 (P28712-B21)
    • 2LFF Drive Cage 4 (P44987-B21)
    • 2SFF Drive Cage 5 (P28718-B21)
    • 2LFF Drive Cage 5 (P44984-B21)

    Dimensions: (H) x (W) x (D)
    • 3.44 x 17.63 x 33.00 in
    • 87.50mm x 448mm x 837.90 mm
    Weight:
    • Min: 41.45 lb (18.80 kg)
    • Max: 106.61 lb (48.35 kg)
    HPE Apollo 4200 Gen10 PLUS SFF Chassis 48SFF Chassis (P28701-B21)
    Drive Cage Options
    • 8SFF Drive Cage 3 (P28703-B21)
    • 2SFF Drive Cage 4 (P28712-B21)
    • 2SFF Drive Cage 5 (P28718-B21)

    Dimensions: (H) x (W) x (D)
    • 3.44 x 17.63 x 33.00 in
    • 87.50mm x 448mm x 837.90 mm
    Weight:
    • Min: 37.95 lb (17.21 kg)
    • Max: 92.16lb (42.00kg)

    Cooling | up to 14 Fans

    The HPE Apollo 4200 Gen10 Plus Server requires high-performance heatsinks (P41668-B21) whenever Intel Optane Persistent Memory, TDP higher than 165w, 256GB LRDIMMs, or GPUs are installed. Additionally, the optional Drive Cage 3 is supported only with Standard Heat Sink Kit.

    The High-Performance Air Baffle Kit (P41660-B21) is required when using high-performance heatsinks to ensure proper airflow and cooling across the system. When Standard Heat Sink(s) is (are) installed, Standard Air Baffle Kit is required. When neither Drive Cage 3 nor High Performance Heat Sink is installed, Standard Moddle Air Baffle Kit is required.

    HPE OCP Thermal Enhancement Kit P28727-B21 This SKU is required for OCP options requiring better thermal condition. 5 dual-rotor fan modules come standard and up to 14 Fans with a 3rd drive cage and rear drive cages installed.

    HPE Apollo 4200 Gen10 PLUS CTO Fan Numbering
    Memory | 24 DIMMs

    The HPE Apollo 4200 Gen10 Plus Server features a robust memory architecture with support for up to 24 DDR4 DIMM slots, delivering a maximum capacity of 4 TB at speeds of up to 3200 MT/s when paired with 3rd Generation Intel® Xeon® Scalable processors. This system also supports Intel® Optane™ Persistent Memory 200 Series (PMem), which provides up to 4 TB of additional capacity per processor socket for memory-intensive applications. The combination of DDR4 and Optane PMem enables greater flexibility, scalability, and performance, making it ideal for workloads such as in-memory databases, big data analytics, and AI/ML applications. However, to utilize Optane PMem, balanced configurations with standard DDR4 memory are required, and limitations may apply when using higher TDP CPUs or populating Drive Cage 3

    Rules and Limitations
    • Mixing of LRDIMM and RDIMM is not supported
    • Mixing of x4 and x8 memory is not supported
    • Mixing of 3DS memory and non-3DS memory is not supported
    • 24LFF supports up to four 256GB LRDIMMs
    • 48SFF supports up to six 256GB LRDIMMs
    • 1P 3rd Gen Intel, max 4 Intel Optane Pmem
    • 2P 3rd Gen Intel, max 8 Intel Optane Pmem
    • Mixing of capacities of Persistent memory is not allowed.
    • Pmem requires a High Performance Heat Sink (P41668-B21)
    • Pmem not supported with Drive Cage 3
    • Pmem requires an RDIMM or LRDIMM to be configured.
    Drive Cage 3

    Only 1 optional drive cage can be installed in Cage 3 location

    Drive Cage 3 is an optional, front-facing drive bay that expands the storage capacity and flexibility of the HPE Apollo 4200 Gen10 Plus Server. Below are the key details, options, and limitations:

    • 4 LFF SAS/SATA Drive Cage (P28702-B21) 24 LFF ONLY
    • 8 SFF NVMe/SAS/SATA Drive Cage (P28703-B21)
    Drive Cage 3 cannot be installed with:
    • CPUs over 165W TDP
    • High-performance heatsinks
    • Intel Optane Persistent Memory (PMem)
    • 256GB LRDIMMs
    • GPU accelerators

    The 8SFF Drive Cage 3 has 6 smaller fans attched for cooling. The 4 LFF Drive Cage 3 does not have any fans.

    HPE Apollo 4200 Gen10 PLUS 8SFF Drive Cage 3
    Drive Cage 4
    2SFF x4 Tri-Mode U.3 BC Primary Drive Cage 4 Kit
    Slot# Technology Bus Width Connector Width Slot Form Factor Notes
    2 SFF x4 Tri-Mode U.3 BC x4 Tri-Mode U.3 BC Primary Drive Slots (Drive Cage 4)
    3 PCIe 4.0 X16 X16 Full-height, half-length slot Proc1

    HPE Tri-Mode Controllers are only supported for SFF Drive Cage 3, Cage 4, or Cage 5.

    HPE Apollo 4200 Gen10 PLUS Drive Cage 4 and 5
    Drive Cage 5
    2SFF x4 Tri-Mode U.3 BC Secondary Drive Cage5 and PCIe Tertiary Riser Kit
    Slot# Technology Bus Width Connector Width Slot Form Factor Notes
    2 SFF x4 Tri-Mode U.3 BC Secondary Drive Slots (Drive Cage 5)
    6 (Tertiary) PCIe 4.0 X16 X16 X16 Full-height, half-length slot Proc2
    7 (Tertiary) PCIe 4.0 X8 X8 X8 Full-height, half-length slot Proc2

    HPE Tri-Mode Controllers are only supported for SFF Drive Cage 3, Cage 4, or Cage 5.

    HPE Apollo 4200 Gen10 PLUS Drive Cage Numbering
    HPE Apollo 4200 Gen10 Plus PCI Risers

    This Server supports two riser options for the Primary Slot and two riser bundle options for the Secondary and Tertiary Slots, with one required for each. These risers enable up to six PCIe Gen4 slots, providing high-speed connectivity for storage controllers, accelerators, and networking cards. In dual-CPU configurations, the Secondary and Tertiary risers connect to the second processor, ensuring balanced performance and optimized PCIe lane utilization. This flexible design allows for full-height, half-length cards while delivering the bandwidth needed for NVMe storage, GPU accelerators, and other modern workloads.

    HPE Apollo 4200 Gen10 PLUS Bundled PCI riser
    PCIe Primary Riser Kit
    Slot# Technology Bus Width Connector Width Slot Form Factor Notes
    1 PCIe 4.0 X16 X16 Full-height, half-length slot Proc1
    2 PCIe 4.0 X8 X8 Full-height, half-length slot Proc1
    3 Power only Power only X8 Full-height, half-length slot
    PCIe Secondary and Tertiary Riser Kit
    Slot# Technology Bus Width Connector Width Slot Form Factor Notes
    4 (Secondary) PCIe 4.0 X16 X16 X16 Full-height, half-length slot Proc2
    5 (Secondary) PCIe 4.0 X8 X8 X8 Full-height, half-length slot Proc2
    6 (Tertiary) PCIe 4.0 X16 X16 X16 Full-height, half-length slot Proc2
    7 (Tertiary) PCIe 4.0 X8 X8 X8 Full-height, half-length slot Proc2
    Open Compute Project 3.0 (OCP)

    The HPE Apollo 4200 Gen10 Plus Server includes a dedicated slot for an OCP 3.0 NIC adapter, offering enhanced networking capabilities in a compact form factor. For OCP cards requiring improved thermal conditions, the HPE OCP Thermal Enhancement Kit (P28727-B21) is mandatory. This kit ensures adequate cooling and optimal performance by integrating into the server's thermal architecture. When installed, the kit is positioned in the primary riser slot, directly above the OCP card, providing targeted airflow and maintaining thermal stability even under high workloads. This design allows seamless integration of high-performance OCP networking solutions while safeguarding system reliability.

    HPE Apollo 4200 Gen 10 Plus OCP 3.0 Card for Cooling
    M.2 Drive | 2 SATA or NVMe
    HPE NS204i-p NVMe OS Boot Device (P12965-B21) HPE NS204i-p NVMe OS Boot Device
    (P12965-B21)

    The HPE NS204i-p NVMe OS Boot Device utilizes x2 PCIe Gen3 lanes with an x8 PCIe slot interface, offering a high-speed boot and storage solution. Designed for NVMe M.2 drives, it delivers exceptional performance, ensuring rapid OS loading and reduced boot times, making it ideal for applications requiring fast, reliable boot capabilities.

    HPE Universal SATA AIC HHHL M.2 SSD Kit (878783-K21) HPE Universal SATA AIC HHHL M.2 SSD Kit
    (878783-K21)

    In contrast, the HPE Universal SATA AIC HHHL M.2 SSD Kit supports SATA-based M.2 drives, providing a more cost-effective solution for applications with moderate performance requirements. This half-height, half-length adapter card is compatible with standard SATA M.2 SSDs and integrates seamlessly into the system for expanded storage or secondary boot needs.

    HPE Computation and Graphics Accelerators

    Since this server is so dense and has so many options. When a GPU is installed, a lot of other features are not supported. Below is a list of rules and requirements that must be followed for this Apollo 4200 Gen10 Plus server to support GPUs.


    Limitations & Requirments
    • The Drive Cage 3 is not supported when this SKU is selected.
    • This SKU can only be installed in PCIe Slot 6, 2nd processor is required.
    • Processors over 165W are not supported when this SKU is selected.
    • Memory DIMMs over 128GB are not supported.
    • Intel DC Persistent Memory DIMMs are not supported.
    • When GPU is installed, High-Performance Heat Sink Kits (P41668-B21) are required for processors
    HPE Apollo 4200 Gen10 Plus Flex Slot your power!

    All power supplies in a server should match. Mixing Power Supplies is not supported. HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.

    HPE Apollo 4200 Gen10 PLUS
     

    Current Configuration

    HPE Chassis

    HPE Processors

    Bezel, Blanks, and more (Optional)

    Memory

    Drive Options (Optional)

    Drive Cage 1 and 2 Controllers (Optional)

    Drive Cage 3 Cables and Controllers (Optional)

    Drive Cage 4 and 5 Cables (Optional)

    HPE LFF Drives SAS (3.5in) (Optional)

    HPE LFF Drives SATA (3.5in) (Optional)

    HPE NVMe Drives (Optional)

    PCI Riser Options (Optional)

    M.2 Drives (Optional)

    Networking Adapters (Optional)

    OCP (Optional)

    Host Bus Adapters (HBAs) (Optional)

    Storage Controller (Optional)

    InfiniBand (Optional)

    GPU (Optional)

    USB (Optional)

    iLO Server Management (Optional)

    Rail Kit (Optional)

    Power Supply Unit (PSU)

    Select Warranty

    *list also serves as quick links to each section

    Welcome to the Request Express Quoting Form!

    for: HPE Apollo 4200 Gen10 PLUS CTO Server


    This streamlined form is designed to simplify the quoting process for you. Whether you're uncertain about specific parts or seeking a hassle-free experience, you're in the right place.

    Provide us with the necessary details, and we'll generate a customized quote for your server. Even if you're unsure about the exact components you need, we've got you covered. Our team will tailor a solution based on the information you provide.

    Let's get started!
    Simply fill out the form, and we'll take care of the rest.


    Name *
    Email *
    Message *
    Preferred Brand
    Form Factor
    Rack Unit of Height (#U)
    Processor(s)
    Memory
    Total Amount of Memory
    Total Amount of Usable Storage

    Storage Type


    RAID

    List Networking Connection needed:
    Rack Space Restrictions
    Which OS do you plan on using:


    Price as Configured: 0

    Add to Cart

    Error Submitting Cart. Please get in touch with us for support.

    Please select all the mandatory items in the configuration list before submitting the cart.

    One or more items in your cart has no price. This will be submitted as a "Request for a Quote".

    Product Specs

    Shipping Information

    Express Computer Systems can ship to virtually any address in the world and provides you with the best shipping rates possible. Cost of shipping varies depending on what service you require, your destination and size of the shipment. Shipping costs will be calculated separately from your order and billed to you post purchase. In the notes section of your order please provide us with your preferred shipping method and we will get back to you.

    Custom configured orders ship within 2 business days after all required products are in stock.

    Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine, California.

    Domestic Shipments
    • Standard Ground
      • Shipping time: 2-7 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-10 business days
      • Excludes weekends, holidays or weather delays.
    • 3 Business Days
      • Shipping time: 3 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 3-6 business days
      • Excludes weekends, holidays or weather delays.
    • 2 Business Days
      • Shipping time: 2 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-5 business days
      • Excludes weekends, holidays or weather delays.
    • Overnight / Next Business Day
      • Shipping time: 1 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 1-4 business days
      • Excludes weekends, holidays or weather delays.
    International Shipments
    • International Economy
      • Shipping time: 4-6 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 5-9 business days
      • Excludes weekends, holidays or weather delays.
    • International Priority
      • Shipping time: 1-3 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-6 business days
      • Excludes weekends, holidays or weather delays.

    For more information on shipping view our Shipping Information page or send us a message

    Subscribe