Please remove $0 item(s) from cart - or - Request for Quote

HPE ProLiant ML30 Gen9 CTO Tower Server

Brand:
Type:
CTO Servers
Condition:
ECS Refurbished & Tested
-PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
-SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.

Multi-Quantity Discounts Available for ALL Line Items

** LARGE DISCOUNTS available for complete systems. Pricing displayed is for single item purchases **

Use the configuration tool to create your solution and submit it us for a quote OR send us a message with your complete build requirements to receive best pricing

READ ME

  • Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
  • “Submit for Quote” items can be added to your cart and sent to us via the cart page
  • Click the blue bar to close/open a section from view after choosing your options

Server Chassis

HPE Processors

CPU at 2133MHz

Supports (1) processor

CPU at 2400MHz

Supports (1) processor

HPE Memory 2133MHz UDIMM (Optional)

Supports up to 4 DIMMs

HPE Memory 2400MHz UDIMM (Optional)

Supports up to 4 DIMMs

Blanks (Optional)

Blanks and need to keep the Air flow at peak performance.

Non Hot-Plug SATA Drives LFF (3.5") (Optional)

Supports up to (4) Drives

Hot-Plug SAS Drives LFF (3.5") (Optional)

Supports up to (4) Drives

Hot-Plug SATA Drives LFF (3.5") (Optional)

Supports up to (4) Drives

Hot-Plug SAS Drives SFF (2.5") (Optional)

Supports up to (8) Drives

Hot-Plug SATA Drives SFF (2.5") (Optional)

Supports up to (8) Drives

HPE M.2 Drives (Optional)

This takes up (1) PCI-e Slot.
If you dont have the riser, please make sure to select a kit with one.

Network Adapters (Optional)

Supports up to 4 PCI-e 3.0 Slots (Full Height)
Please read below for more details about PCI slots.

HPE Expansion (Optional)

Supports up to 4 PCI-e 3.0 Slots (Full Height)
Please read below for more details about PCI slots.

Storage Controller (Optional)

NOTE: Must select Mini SAS H240 Cable Kit (789648-B21) x1 for 4LFF model.
NOTE: Must select Mini SAS H240 Cable Kit (789648-B21) x2 for 8SFF model.

Optical Drives (Optional)

The optical drive goes into the Media bay and needs the Carrier to be installed correctly.

HPE USB and SD Options (Optional)

Systems Fans

Please select the system fan for cooling of the system board
If you have choosen a PCI-e Adapter or Expansion Card. Please install the PCI Front fan for additional cooling.

Server Management (Optional)

Comes Standard with iLO and UEFI
The embedded B140i controller will operate in UEFI only mode. For legacy support an additional controller will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22

Trust Platform Module (TPM) (Optional)

NOTE: HPE Trusted Platform Module 2.0 Option works with Gen9 servers with UEFI Mode not Legacy Mode.

Power Supply Unit

Mixing of power supplies in the same server is not supported.
If you would like to swap out the 350W PSU for a redundant 460W PSU you need the following
Select 1 or 2 460W Gold PSU - 511777-001
Select the RPSU Cage
Select the RPSU Backplane
Select the RPSU Cables.

ECS Warranty

Helpful Tip: Once desired configuration is selected click "Add to Cart". From the cart page you can submit a submit a quote request for best pricing

The refurbished HPE ProLiant ML30 Gen9 server is an affordable single-socket tower server that features value performance, expansion, and growth that is ideal for small businesses and remote branch offices.

The ML30 Gen 9 HPE Tower Server has a few Drive Options in this 1 Socket configurations. Depending on the Storage controller installed, you can have either 4 SATA/SAS LFF Drives or 8 SATA/SAS HDD/SSD SFF Drives. This Server has 4 PCIe slot in the back of the tower. Please take note as to what card you're installing into what spot. Slot 4 is a x16PCI-e while slot 3/2 are x4PCI-e and slot 1 is a x8PCI-e. All of this is powered by either a Non-Hot Swap 350W (E-star 1.0/2.0) PSU or a redundant configuration with 1 or 2 Hot Swap 460W PSU CS Gold with hot swap PSU backplane. When the Redundant PSU backplane is installed 1 media tray slots can't be installed.

ML30 4U Chassis Configurations:
Max Internal Storage:
  • Non Hot Plug LFF SATA | 4 x 4TB = 16TB
  • Hot Plug LFF SAS | 4 x 12TB = 48TB
  • Hot Plug LFF SATA | 4 x 12TB = 48TB
  • Hot Plug LFF SATA SSD | 4 x 1.92GB = 7.68TB
  • Hot Plug SFF SAS | 8 x 2.4TB = 19.2TB
  • Hot Plug SFF SATA | 8 x 2TB = 16TB
  • Hot Plug SFF SATA SSD | 8 x 3.84TB = 30.72TB
Storage Controllers:
NOTE: Max=1 if selected with another x8 device.
  • (Standard) HPE Dynamic Smart Array B140i with 4 SATA ports support
  • H240 host bus adapter (HBA) PCI-e 3.0x8 2 Internal ports 12Gb SAS 6Gb SATA - 779134-001
  • H241 host bus adapter (HBA) PCI-e 3.0x8 2 Internal ports 12Gb SAS 6Gb SATA- 750054-001
  • Smart Array P440 4GB FBWC Internal PCI-e 3.0x8 12Gb SAS 6Gb SATA controller - 749797-001
  • Smart Array P441 4GB FBWC External 2 mini-SAS ports PCI-e 3.0x8 12Gb SAS 6Gb SATA controller - 749798-001
  • Smart Storage Battery for FBWC support - 871264-001
  • Smart Storage Battery holder - 825640-001
Network Controllers:
NOTE: Max=1 if selected with another x8 device.
Power Supply:
  • (Standard) HPE 350W ATX-Gen9 Power Supply FIO Kit
  • HPE 460W Redundant Power Supply and parts:

The HPE Tower server ML30 is a high-performance server that comes equipped with one CPU and four DIMMs, providing ample processing power and memory to handle a range of workloads. This server also features support for two form factor drives, allowing you to choose between either four LFF HDDs or eight SFF SSD/HDDs. This flexibility makes it easy to customize the server to meet your specific storage needs. Additionally, the HPE Tower server ML30 features a compact tower design, making it easy to deploy and manage in a variety of environments. Whether you're running a small business or a larger enterprise, the HPE Tower server ML30 is a versatile and reliable choice for all of your computing needs.

 

Current Configuration

Server Chassis

HPE Processors

HPE Memory 2133MHz UDIMM (Optional)

HPE Memory 2400MHz UDIMM (Optional)

Blanks (Optional)

Non Hot-Plug SATA Drives LFF (3.5") (Optional)

Hot-Plug SAS Drives LFF (3.5") (Optional)

Hot-Plug SATA Drives LFF (3.5") (Optional)

Hot-Plug SAS Drives SFF (2.5") (Optional)

Hot-Plug SATA Drives SFF (2.5") (Optional)

HPE M.2 Drives (Optional)

Network Adapters (Optional)

HPE Expansion (Optional)

Storage Controller (Optional)

Optical Drives (Optional)

HPE USB and SD Options (Optional)

Systems Fans

Server Management (Optional)

Trust Platform Module (TPM) (Optional)

Power Supply Unit

ECS Warranty

*list also serves as quick links to each section

Welcome to the Request Express Quoting Form!

for: HPE ProLiant ML30 Gen9 CTO Tower Server


This streamlined form is designed to simplify the quoting process for you. Whether you're uncertain about specific parts or seeking a hassle-free experience, you're in the right place.

Provide us with the necessary details, and we'll generate a customized quote for your server. Even if you're unsure about the exact components you need, we've got you covered. Our team will tailor a solution based on the information you provide.

Let's get started!
Simply fill out the form, and we'll take care of the rest.


Name *
Email *
Message *
Preferred Brand
Form Factor
Rack Unit of Height (#U)
Processor(s)
Memory
Total Amount of Memory
Total Amount of Usable Storage

Storage Type


RAID

List Networking Connection needed:
Rack Space Restrictions
Which OS do you plan on using:


Price as Configured: 0

Add to Cart

Error Submitting Cart. Please get in touch with us for support.

Please select all the mandatory items in the configuration list before submitting the cart.

One or more items in your cart has no price. This will be submitted as a "Request for a Quote".

Product Specs

Base Standard Capabilities

Product features

Feature
Description
Processor (One of the following depending on model)
Model
CPU Frequency
Cores
L3 Cache
Power
DDR4 Hz
G4560
3.5 GHz
2
3MB
54 W
2400
G4600
3.6 GHz
2
3MB
51 W
2400
i3-7100
3.9 GHz
2
3MB
51 W
2400
i3-7300
4.0 GHz
2
3MB
51 W
2400
E3-1220v6
3.0 GHz
4
8MB
72 W
2400
E3-1230v6
3.5 GHz
4
8MB
72 W
2400
E3-1240v6
3.7 GHz
4
8MB
72 W
2400
E3-1270v6
3.8 GHz
4
8MB
72 W
2400
E3-1280v6
3.9 GHz
4
8MB
72 W
2400
Cache memory (One of the following depending on model)
  • 8MB (1 x 8MB) level 3 cache (For quad-core intel xeon processors)

  • 3MB (1 x 3MB) level 3 cache (For dual-core intel pentium core i3 processors)

Chipset
Intel C236 chipset
On system management chipset
HPE iLO (Firmware HPE iLO4 2.0) 4GB NAND
Memory protection
ECC
Memory
Type
DDR4 unbuffered (UDIMM)
DIMM Slots available
4 (4 DIMM slots per processor; 2 channels per processor, 2 DIMMs per channel)
Maximum capacity (UDIMM)
64GB (4 x 16GB UDIMM 2133 MHz)
Network controller
HPE Ethernet 1Gb 2-port NC332i adapter
Expansion slots
Expansion Slots Number
Technology
Bus Width
Connector Width
Form Factor
4
PCIe 3.0
x16
x16
Full length/full height
3
PCIe 3.0
x1
x4
Full length/full height
2
PCIe 3.0
x1
x4
Full length/full height
1
PCIe 3.0
x4
x8
Half length/full height
NOTE: Bus width indicates the number of physical electrical lanes running to the connector
Storage controller (One of the following depending on model)
Base models
HPE Dynamic smart array B140i controller
Performance models
HPE Dynamic smart array B140i controller
NOTE: B140i can not mix with any standup internal controller
Internal storage devices (One of the following depending on model)
Optical drives
  • Optional SATA 9.5 mm DVD-ROM optical drive

  • Optional SATA 9.5 mm DVD RW optical drive

Hard drives
None ship standard
Hard drive bays
  • 4 LFF drive bays (Non-hot-plug and hot-plug)

  • 8 SFF hot-plug drive bays

NOTE:
  • HPE ProLiant ML30 Series servers offer both SFF and LFF versions in CTO.
  • All pre-configured models come populated with some hard drive blanks installed. Should the end user need additional hard drive blanks, they can order more using either Part Number (P/N) 666987-B21: HPE SFF HDD blank kit or P/N 666986- B21: HPE LFF HDD blank kit
Maximum internal storage
Drives
Capacity
Configuration
Hot plug LFF SAS
48TB
4x12TB
Hot plug SFF SAS
19.2TB
8x24TB
Hot plug LFF SATA
48TB
4x812TB
Hot plug SFF SATA
16TB
8x2TB
Non-hot plug LFF SATA
16TB
4x4TB
Hot plug SFF SATA SSD
30.72TB
8x3.84GB
Hot plug LFF SATA SSD
7.68TB
4x1.92GB
System fans
Non-redundant
Redundant
1P model system fan
One (1) Non-redundant system fan
NA
1P model PCIe fan
One (1) Non-redundant PCIe fan
NA
Power supply
  • HPE 350 W ATX-Gen9 power supply FIO kit

  • HPE 460 W redundant power supply

  • HPE Entry-Level power supplies provide lower-cost options for users trying to balance their need for enterprise class efficiency and reliability while maintaining lowest possible hardware costs

System fans
Model
Non-redundant
Redundant
1P model system fan
One (1) non-redundant system fan
NA
1P model PCIe fan
One (1) non-redundant PCIe fan
NA
Upgradeability
  • Upgradeable to 4 cores (Total 2 or 4 cores)

  • Up to 4 DIMM slots available for higher memory capacity

  • Up to 8 SFF hard drive bays; or 4 LFF hard drive bays

  • All PCIe 3.0 I/O slots for additional communications and storage expansion

  • Redundant power supply

  • Optical drive bay (Up to 2.)

Interfaces
Video
1 (Rear)
USB 3.0
6 (4 front, 2 rear)
USB 2.0
4 (2 rear, 1 internal standard USB, 1 internal USB header)
Micro SD slot
1 Internal
NOTE: The Micro-SD slot is not a hot-pluggable device. End users should not attempt to plug a Micro-SD card into the Micro-SD slot while the server is powered.
Network RJ-45 (Ethernet)
2 (1 shared for HPE integrated lights-out)
Industry standard compliance
  • ACPI 2.0b compliant

  • PCIe 3.0 compliant

  • PXE support

  • WOL support

  • Microsoft logo certifications

  • USB 2.0 /3.0 support

Graphics
Integrated Matrox G200 video standard
  • 1280 x 1024 (32 b/p)

  • 1920 x 1200 (16 b/p)

HPE iLO 4 on system management memory
  • 16MB flash

  • 256MB DDR 3 with ECC (112MB after ECC and video)

HPE NVIDIA Quadro M2000 GPU Module
Security
  • Power-ON password

  • Setup password

  • Power switch security

  • Administrator's password

  • TPM 1.2

  • TPM 2.0

  • UEFI

Form factor
Micro ATX Tower (4U) chassis with feet/bezel:
  • 36.82 x 17.5 x 47.52 cm (14.5 x 6.89 x 18.71 in)
8 SFF drive bay cage:
  • 11.74 x 14.57 x 12.15 cm (4.6 x 5.74 x 4.79 in)
4 LFF drive bay cage:
  • 11.72 x 14.57 x 17.54 cm (4.6 x 5.74 x 6.90 in)
HPE Server UEFI / legacy ROM
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
  • Secure boot

  • OS specific functionality

  • Support for > 2.2TB (Using GPT) boot drives

  • USB 3.0 stack

  • Embedded UEFI shell

  • Mass configuration deployment tool using RESTful API for iLO 4

  • PXE boot support for IPv6 networks

  • Boot support for option cards that only support a UEFI option ROM

  • Network stack configurations

Embedded management
  • HPE IntegratedLights-Out(HPE iLO)

  • UEFI

  • RESTful API

  • Intelligent provisioning

  • Embedded remote support

Server utilities
  • Smart update

  • HPE Systems Insight Manager(HPE SIM)

  • Scripting ToolKit and Windows PowerShell

  • RESTful interface tool

  • HPE iLO mobile application

  • HPE Insight online

Storage software
  • Data protection and recovery software

  • Data archive and migration software

  • Storage Resource Management Software (SRM)

  • Data replication software

  • Storage device management software

  • HPE StoreVirtual VSA

top

Specs 1

Software overview

Feature
Description
Operating systems and virtualization software support
  • Microsoft Windows Server

  • Red Hat Enterprise Linux (RHEL)

  • SUSE Linux Enterprise Server (SLES)

  • VMware

  • ClearOS

top

Physical specifications

Specification
Description
Dimensions (H x W x D):
36.82 x 17.5 x 47.52 cm (14.50 x 6.89 x 18.7 in)
Weight
  • Maximum: 15.4 kg (30.8 Ib)

  • Minimum: 13.56 kg (27.1 lb)

top

Electrical specifications

Specification
Description
Rated line voltage
100 - 120 V ac
Rated input current
2.5 - 6 A
Rated input frequency
47 - 63 Hz
Rated input power
  • 412 W - 526 W at 115 V ac

  • 412 W - 523 W at 230 V ac

BTU rating
460 W - 1773 BTU/hr (At 120 V ac), 1715 (At 240 V ac)
Rated steady-state power
  • 350 W (At 115 V ac)

  • 350 W (At 230 V ac)

Peak power
  • 350 W (At 115 V ac)

  • 350 W (At 230 V ac)

top

Environmental specifications

Specification
Description
Operating temperature
10°C to 35°C (50°F to 95°F)
Non-operating temperature
-30°C to 60°C (-22°F to 140°F)
Operating relative humidity
10% to 90% non-condensing
Non-operating relative humidity
5% to 95% non-condensing
Operating altitude
3048 m (10,000 ft)
Non-operating altitude
9144 m (30,000 ft)
Acoustic noise
Idle
Operating
LWAd
  • 4.2 Bels (1P LFF base)

  • 3.7 Bels (1P LFF performance)

LpAm
  • 27 dBA (1P LFF base)

  • 23 dBA (1P LFF performance)

LWAd
  • 4.2 Bels (1P LFF base)

  • 3.8 Bels (1P LFF performance)

LpAm
  • 27 dBA (1P LFF base)

  • 23 dBA (1P LFF performance)

NOTE:
  • Configurations tested for 1P LFF base models include one (1) 1TB LFF SATA Midline (MDL) HDD and Windows 2012 Enterprise 64-bit
  • Configurations tested for 1P LFF performance models include one (1) 1TB LFF SATA MDL HDD and Windows 2012 Enterprise 64-bit
  • The listed sound levels apply to standard shipping configurations. Additional options may result in increased sound levels
  • Levels presented do not account for non-Hewlett Packard Enterprise installed hardware

top

Safety certifications

Specification
Description
Emissions Classificatio (EMC)
FCC rating
Class B
Normative standards
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003;CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3;EN 60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on sample (Type) testing, evaluation or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.

top

Shipping Information

Express Computer Systems can ship to virtually any address in the world and provides you with the best shipping rates possible. Cost of shipping varies depending on what service you require, your destination and size of the shipment. Shipping costs will be calculated separately from your order and billed to you post purchase. In the notes section of your order please provide us with your preferred shipping method and we will get back to you.

Custom configured orders ship within 2 business days after all required products are in stock.

Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine, California.

Domestic Shipments
  • Standard Ground
    • Shipping time: 2-7 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-10 business days
    • Excludes weekends, holidays or weather delays.
  • 3 Business Days
    • Shipping time: 3 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 3-6 business days
    • Excludes weekends, holidays or weather delays.
  • 2 Business Days
    • Shipping time: 2 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-5 business days
    • Excludes weekends, holidays or weather delays.
  • Overnight / Next Business Day
    • Shipping time: 1 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 1-4 business days
    • Excludes weekends, holidays or weather delays.
International Shipments
  • International Economy
    • Shipping time: 4-6 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 5-9 business days
    • Excludes weekends, holidays or weather delays.
  • International Priority
    • Shipping time: 1-3 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-6 business days
    • Excludes weekends, holidays or weather delays.

For more information on shipping view our Shipping Information page or send us a message

ECS Warranty Information

Express Computer Systems (ECS) provides a 1 year parts warranty against defects in material or workmanship that will affect the products functionality. All refurbished items are tested prior to shipping to guarantee up-time upon arrival. If you are having issues with an item we provided please Contact Us and we will do our best to assist you.

What does our ECS warranty cover?
We offer 1 year warranty as standard and additional years can be added to fit your needs. Please reach out to a sales associate via the Contact Us page or live chat for more information on extended coverage options. During the coverage period if your product fails we will offer a Next Business Day replacement. If we are unable to replace the product we will refund its original selling price. Shipping costs and tax are not refundable. Express Computer Systems retains the right to decide whether the goods will be replaced or refunded.

What is not covered by our warranty?
Our warranty does not cover any problem caused by the following conditions:

  1. accidents; misuse; carelessness; electrostatic discharge; shock; temperature or humidity beyond the specifications of the product; improper installation; operation; modification;
  2. any improper use that contravenes the instructions in the user manual;
  3. problems caused by other equipment. Our warranty is void if the product is returned with damaged, removed, counterfeit labels, or any modifications (including any component or external cover removal). Our warranties do not cover data loss or damages to any other equipment. In addition, our warranties do not cover incidental damages, consequential damages, or costs related to data recovery, removal, and installation.

Important notes:

  • Please ask for additional warranty/coverage that you may require in addition to the standard 1 ECS warranty prior to final purchase. Requesting additional warranty after your purchase can be denied.
  • FREE technical support is provided on purchased items via phone, email, or live chat.

About Express Computer Systems

Express Computer Systems is committed to transforming our customers’ IT infrastructure with high quality products at affordable costs. Our sales reps and customer support engineers understand our customers rely heavily on advanced technology to run their business but need to do so without breaking the bank.

We specialize in building custom server configurations, custom storage solutions, networking solutions, and components from top manufacturers including HPE, Dell, Cisco, NetApp, Dell EMC, HPE Nimble and many others.

Subscribe