Your Cart is Empty
Base Standard Capabilities
Product features
Feature | Description |
|---|---|
Processor1 | Sixteen-core processors:
Twelve-core processors:
Eight-core processors:
Quad-core processors:
|
Chipset2 | AMD SR5690 and SP5100 |
Cache memory | 16MB Level 3 cache memory |
Upgradeability | Upgradeable to two (2) processors |
On system management chipset | HP iLO (Firmware: HP iLO 4) |
Memory protection |
|
Memory type3 |
|
Network controller4 |
|
Graphics | Integrated Matrox G200 video standard:
|
Maximum internal storage7 |
|
Expansion slots | Two (2) I/O expansion mezzanine slots:
Mezzanine card options include:
|
Interface10 |
|
Other features |
|
NOTE: 1: Processor wattage references reflect Thermal Design Power (TDP). Click here for more information on Thermal Design Power (TDP) and Average CPU Power (ACP). 2: Click here for more information regarding AMD chipsets . 3: HP memory from previous generation servers are not qualified or warranted with this server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen8. Click here for additional information on the HP SmartMemory . LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and LRDIMM. UDIMM max DIMM population is 16. Depending on the memory configuration and processor model, the memory speed may run at 1600 MHz, 1333 MHz, or 1066 MHz. Click here to see the Memory Population Table or the Online Memory Configuration Tool . 4: Supports one of the following FlexibleLOMs and iLO Management. 5: Supports FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, iSCSI boot, and autosensing 10Gb/1Gb Ethernet. Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP BladeSystem c-Class interconnect components. Both ports will operate at the same speed. FlexFabric capabilities require the use of an HP Virtual Connect FlexFabric module. Fibre Channel over Ethernet (FCoE) is supported with the HP 10GbE Pass-Thru Module, HP 6120XG Blade Switch with the CEE license installed, HP Cisco B22HP Fabric Extender and HP Cisco B22HP Fabric Extender with 16 FET for BladeSystem c-Class. 6: FlexibleLOMs are not compatible with prior generation c-Class server blades 7: The ProLiant BL465c Gen8 server includes the new HP small form factor (SFF) hot plug SmartDrive carrier for enhanced management and reduced maintenance errors. HP drives from previous generation servers are not compatible with the ProLiant BL465c Gen8 drive bays. The mixing of standard SAS drives with SAS SSD drives is supported within the server, but limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives types is not supported. 8. This expansion slot supports dual-port mezzanine cards: one port is routed to interconnect module bay 3 and the other to bay 4. 9. This expansion slot supports dual-port and quad-port mezzanine cards. For dual-port cards, one port is routed to interconnect module bay 5 and the other to bay 6. For quad-port cards, one port is routed to interconnect module bay 5, one to bay 6, one to bay 7, and one to bay 8. 10. The above options are for integrated hypervisor virtualization environments needing a low cost boot solution with the highest performance and reliability. | |
Software overview
Feature | Description |
|---|---|
Operating System (OS) and virtualization software support1 |
|
NOTE: 1. For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for server, visit our Support Matrix or the driver download page. click here to access the Operating System Support Matrix . Click here to access the driver download page . | |
Physical specifications
Feature | Description |
|---|---|
Dimensions (H x W x D) | 18.07 x 5.54 x 51.76 cm (7.11 x 2.18 x 20.37 in) |
Weight |
|
NOTE: 1: All processors, sixteen (16) DIMMs, hard drives, mezzanine cards, and two flash cache batteries installed. 2: One processor and two (2) DIMMs installed. | |
Environmental specifications
Feature | Description |
|---|---|
System inlet temperature | Operating:
Non-operating:
|
Relative humidity | Operating:
Non-operating:
|
Altitude | Operating:
Non-operating:
|
NOTE:For acoustic noise and power specifications, please see the HP BladeSystem c-Class Enclosures QuickSpecs: Click here to view HP BladeSystem c3000 Enclosure QuickSpecs . Click here to view HP BladeSystem c7000 Enclosure QuickSpecs . | |
Specs 1
Technical specifications
Feature | Description |
|---|---|
HP Smart Array P220i Controller | |
Disk drive interface | 6 Gb/s Serial Attached SCSI (SAS) |
Server Interface | x4 PCI Express host interface |
Cache memory | 512MB Flash Backed Write Cache (FBWC) standard |
Logical drives supported | 64 (with included 512MB cache) |
Host memory addressing | 64-bit, supporting servers memory space greater than 4GB |
RAID support | RAID 1 (mirroring) and RAID 0 (striping) |
Other | Upgradeable firmware with recovery ROM Online drive flash (with SAS drives) |
HP FlexFabric 10Gb 2-port 554FLB FlexibleLOM | |
Type | Integrated dual-port KR 10Gb FlexibleLOM with FlexFabric (Flex-10, FCoE, hardware-based iSCSI, iSCSI boot, TCP/IP offload engine, and autosensing 1Gb/10Gb Ethernet capability) |
Network processor | Emulex BE3 |
Data transfer method | x8 PCI Express 2.0 |
Network transfer rate1 | Two ports, each at 20 Gb/s full duplex; 40 Gb/s aggregate full duplex theoretical bandwidth |
IEEE Compliance | 802.1p, 802.1q, 802.1qau, 802.3ad, 802.3ae, 802.3ap (10GBase-KX4) and 802.3x |
Standard features |
|
NOTE: 1. Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP BladeSystem c-Class interconnect components. Both ports will operate at the same speed. Each port on the 554FLB adapter transmits from the server at 20 Gb/s (theoretical) full duplex. | |
Safety certifications
Feature | Description |
|---|---|
IEEE compliance |
|
Industry standard compliance |
|
