HPE FlexFabric 10GbE 2-port 534M Mezzanine Adapter | 700748-B21

HPE FlexFabric 10GbE 2-port 534M Mezzanine Adapter | 700748-B21

Extended SKU - This adapter is part of an extended catalog of products tailored for customers in specific markets or with specific workloads. R equiring the utmost in performance or value, but typically have a longer lead-time.
The HPE FlexFabric 534M is a 2-port 10GbE Mezzanine adapter, featuring the next generation of 10Gb Ethernet offering in a single chip solution on a mezzanine form factor that further reduces power requirements for 2 ports of 10 Gb Ethernet. It is designed for use with HPE Blade System c-Class Gen9 blade server platform's type A and Type B mezzanine slots.

NOTE: This adapter requires a minimum of 2 GB of server memory.
NOTE: This adapter supports linking at 1000 Mbps or 10000 Mbps when not connected to a Flex-10 device.
NOTE: This adapter will only support 1000 Mbps when connected to a 1 Gb Ethernet interconnect.

P/N's:

• 700748-B21
• 701530-001

At a Glance Features:

• Full hardware offload of iSCSI and FCoE storage protocol processing for highest performance converged Ethernet data and storage networks.
• Industry-leading throughput and latency performance
• Up to 40 Gb/s bi-directional near-line rate throughput
• User configurable bandwidth settings when combined with the 10 Gb Flex-10 Virtual Connect module. From 100 Mb/s to 10 Gb/s on up to four "Physical Function" NICs per port, in increments of 100 Mb/s for NIC. The combined bandwidth of NICs cannot exceed port bandwidth i.e. 10 Gb.

Compatibility Supported Servers

• HPE ProLiant BL460c Gen9 Server
• HPE ProLiant BL660c Gen9 Server
• HPE ProLiant WS460c Gen9 Server
• HPE ProLiant BL460c Gen10 Server

Throughput- Theoretical Bandwidth
This adapter delivers 20 Gb/s bi-directional Ethernet transfer rate per port (40 Gb/s per adapter), providing the network performance needed to improve response times and alleviate bottlenecks.

TCP/UDP/IP For overall improved system response, this adapter supports standard TCP/IP offloading techniques including: TCP/IP, UDP checksum offload (TCO) moves the TCP and IP checksum offloading from the CPU to the network adapter. Large send offload (LSO) or TCP segmentation offload (TSO) allows the TCP segmentation to be handled by the adapter rather than the CPU.

It provides full duplex high performance Ethernet connectivity with support for HPE Virtual Connect Flex-10 blade interconnect technology, allowing each 10GbE port to be divided into four physical NICs and optimize bandwidth management for virtualized servers. The HPE FlexFlex Fabric 534M adapter, has iSCSI and FCoE storage I/O functionality making it a full-Converged Network Adapter (CNA). The HPE 534M supports enterprise class features such as VLAN tagging, TCP/IP Stateless Offloads, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo frames and PXE boot. It also supports virtualization features such as Network Partitioning (NPAR), SR-IOV (Windows, Linux, VMware), Tunnel Offloads (NVGRE, VXLAN), VMware NetQueue and Microsoft VMQ.