Please remove $0 item(s) from cart - or - Request for Quote

This website performs best when viewed from a Desktop

All

  • All
  • AMD
  • APC
  • Avago
  • Brocade
  • Cisco
  • Dell
  • Dell CTO
  • ECS
  • EMC
  • EqualLogic
  • Express Computer Systems
  • Hitachi
  • HPE
  • Hynix
  • IBM
  • Intel
  • Mellanox
  • Micron
  • NetApp
  • Nvidia
  • OEM
  • Samsung
  • Seagate
  • Toshiba
  • Xilinx

    HPE ProLiant DL360 Gen10 CTO Rack Server

    Brand:
    Type:
    CTO Servers
    Condition:
    ECS Refurbished & Tested
    -PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
    -SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.

    Multi-Quantity Discounts Available for ALL Line Items

    ** LARGE DISCOUNTS available for complete systems. Pricing displayed is for single item purchases **

    Use the configuration tool to create your solution and submit it us for a quote OR send us a message with your complete build requirements to receive best pricing

    READ ME

    • Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
    • “Submit for Quote” items can be added to your cart and sent to us via the cart page
    • Click the blue bar to close/open a section from view after choosing your options

    Server Chassis

    HPE Processors

    Mixing of 2 different processor models is not supported.
    The first processor, will include 5 fans, and the second processor will add 2 additional fans 10 NVMe CTO Server will always get 7 High-Performance fans
    Processors with 130W or higher will ship with the High-Performance heat sink
    L processors (i.e. 8280L) - Large memory tier Up to 4.5 TB addressable memory per socket
    M processors (i.e. 8280M) - Medium memory tier Up to 2.0 TB addressable memory per socket
    R processors (i.e. 6258R) - Refresh Improved price/performance over equivalent “non-R” 2 nd generation processors
    S processors (i.e. 5220S) - Search Optimized Optimized base frequency to address ‘search’ workloads,
    U processors (i.e. 6212U) - only supported in single socket configurations
    V processors (i.e. 6262V) - VM Density Optimized Fosters enhanced VM density, allowing to support more/larger virtual machines per host.
    Y processors (i.e. 8260Y) - Speed Select, Intel® SST-PP increases base frequency when fewer cores are enabled.

    Intel Xeon Gen1

    Supports up to (2) processors

    Intel Xeon Gen2

    Supports up to (2) processors

    Bezel and Security (Optional)

    Legacy FIO Mode (758959-B22) not supported with this option on the Network Choice (NC) Configure-to-Order (CTO) chassis.

    Blanks (Optional)

    Cable Kit (Optional)

    Most kits come with the cables needed.
    Tri-Mode options are supported on 8SFF Basic Carrier CTO Server only

    HPE RDIMM LRDIMM Gen 1 (Optional)

    12 DIMMs per processor (up to 24 DIMMs in a dual-processor configuration)
    Mixing RDIMM and LRDIMM memory is not supported.

    HPE NVDIMM (Optional)

    Max 12 NVDIMMs per Sever, only supported by Gen 1 Processors
    Must Install Storage Battery for NVDIMM's to work properly
    Can only be mixed with RDIMMs

    HPE RDIMM LRDIMM Gen 2 (Optional)

    12 DIMMs per processor (up to 24 DIMMs in a dual-processor configuration)

    HPE Presistent Memory (Optional)

    Max 12 Presistent Memory per Server
    Can only be mixed with either RDIMMs or LRDIMMs

    HPE Drive Options (Optional)

    The 10SFF Enablement kit only works on the 8SFF Chassis, needs two CPUs, and High-Performance Fans.
    The 10SFF Premium Backplane Kit 867974-B21 supports SAS/SATA/NVMe drives on bay 1-8 and only NVMe on Bay 9-10.
    The SFF Optical Drive Blank Kit is needed to install an ODD.
    BC Dive Cage Supported only with 8SFF Basic Carrier CTO Server

    HPE LFF Drives SAS (3.5in) (Optional)

    Supports up to (4) Drives

    HPE LFF Drives SATA (3.5in) (Optional)

    Supports up to (4) Drives

    HPE SFF Drives SAS (2.5in) (Optional)

    Supports up to (8 or 10) Drives

    HPE SFF Drives SATA (2.5in) (Optional)

    Supports up to (8 or 10) Drives

    HPE NVMe SFF Drives (Optional)

    Supports up to (8 or 10) Drives

    HPE Basic Carrier (BC) Drives (Optional)

    Basic Carrier drives support on 8SFF Basic Carrier CTO Server only
    MegaRAID Support these drives only.

    HPE PCI Riser Options (Optional)

    3 PCIe Slots on a 2P Configuration.
    For 10 NVMe chassis – Secondary Riser is not available due to 10 x4 NVMe riser for PCIe direct attached
    Rear Drive +1 SFF or 1 uFF SSD (2x M.2 cartridges) Means you'll lose the FH PCI Slot 1.
    2SFF NVMe Backplane Kit (871242-B21) and the 10 SFF Premium backplane kit (867974-B21) both come with NVMe Risers. Please read the the manuals below for more details.

    HPE M.2 Drives (Optional)

    SCM dual drive functionality (M.2 UFF P47819-B21) is only supported on 1SFF Rear Backplane (867972-B21) or 2SFF UFF Backplane Kit (867970-B21).
    Installation on any other bay will only show one M.2 drive per bay.
    The Primary SATA M.2 2280 Riser Kit (867978-B21) only supports the Type 2280 M.2 Drives.

    HPE Networking Adapters (Optional)

    Network Adapters, Converged Network Adapters, InfiniBand Adapters
    The NC Chassis do not have an Embedded Network Adapter.
    Other Chassis have a Default Embedded 1Gb Ethernet 4-Port 331i Adapter

    HPE FlexibleLOM Adapters (Optional)

    The System Board has a dedicated FlexibleLOM port. This does not take up a PCI slot.
    The NC Chassis do not have an Embedded Network Adapter.
    Other Chassis have a Default Embedded 1Gb Ethernet 4-Port 331i Adapter

    HPE Host Bus Adapters (HBAs) (Optional)

    HPE Storage Controller (Optional)

    Mixing of BC and SC carrier types is not allowed.
    Smart carrier (SC) drives will not function with Broadcom MegaRAID controllers.
    NVMe is not supported with DL360 Gen10 with Broadcom MegaRAID storage controllers.
    If you install the Second Riser and want to also install the Type-A Smart Array. You must select the "LH" style controller to fit.
    If you select a Performance Smart Array you will also need a Storage Battery/Capacitor
    The NS204i-p Boot Device is at the bottom.

    HPE Accelerators (Optional)

    Please make sure the correct Risers are installed for the GPUs
    The High-Performance Fan Kit (871244-B21) must be installed for any GPUs.
    Secondary Riser needs 2 CPUs

    HPE Mixed Options (Optional)

    Cooling Options: Optional High-Performance Fan Kit available (includes 7 fans).
    The Fan Kit is needed when you install any NVMe devices or GPU.
    Optical Drive Options: For ODD Support on the 8SFF Chassis, you'll need the Display Port/USB/Optical Drive Blank Kit 868000-B21 (8SFF model only).
    USB Options
    System Insignt Display Options

    HPE Rail Kit (Optional)

    HPE iLO Server Management (Optional)

    HPE iLO with Intelligent Provisioning (standard)

    Power Supply Unit (PSU)

    Supports up to(2) PSUs

    ECS Warranty

    Helpful Tip: Once desired configuration is selected click "Add to Cart". From the cart page you can submit a submit a quote request for best pricing

    What’s New for DL360 Gen10
    • Supporting the second generation Intel Xeon Scalable processor family with up to a 11% per-core performance gain over first generation and with memory speeds up to 2933 MT/s.
    • HPE Persistent Memory offers the flexibility to deploy as dense memory or fast storage featuring Intel Optane DC Persistent Memory and enables per-socket memory capacity of up to 3.0 TB.
    • 800GB 1.6/3.2/6.4TB NVMe Mixed Use SFF SSDs
    • 960GB 1.92/3.84/7.68TB NVMe Read Intensive SFF SSDs
    • 480GB/1.92/3.84TB SATA Mixed Use SFF SSDs
    • HPE StoreFabric SN1610Q 32Gb 1 port Fibre Channel Host Bus Adapter
    • HPE StoreFacbric SN1610Q 32Gb 2 port Fibre Channel Host Bus Adapter
    • Networking Choice (NC) server models provide greater flexibility in the primary networking selection.
    • HPE InfoSight provides a cloud-based analytics tool that predicts and prevents problems before your business is impacted.
    • Enhanced iLO 5 security features such as Server Configuration Lock, iLO Security Dashboard and Workload Performance Advisor.

    Ideal for:

    • Cloud Servers
    • Corporate IT
    • Data Analytics
    • Database
    • High-Performance Computing (HPC)
    • Hyper-Converged infrastructure (HCI)
    • Virtual Desktop Interface (VDI)
    • Virtualization
    • Virtual Machines (VM)

    Industry-leading Performance with Versatile Compute

    The refurbished HPE ProLiant DL360 Gen10 server delivers security, agility and flexibility without compromise. It supports the Intel Xeon Scalable processor with up to a 60% performance gain and 27% increase in cores, along with 2933 MT/s HPE DDR4 SmartMemory supporting up to 3.0 TB with an increase in performance of up to 82%.

    Achieve greater capacity with flexible drive configurations with up to 10 SFF and four LFF drives along with an option to support up to 10 NVMe PCIe SSDs delivering enhanced performance, capacity, and reliability to meet various customer segments and workload requirements at the right price.

    HPE DL360 Gen10 Base Knowledge

    The HPE ProLiant DL360 Gen10 Rack Server is a very powerful 1U 2 Socket server supporting 24 DIMMs on a 2-socket configuration. This server has many different types of upgrades and support for many options. These options have rules that need to be followed. Like the ability to install NVDIMM or Persistent Memory. Each of these types of memory is only supported by certain Processors.

    The DL360 Gen10 Rack Server can support 2 Intel Scalable Processors. Either Gen1 or Gen 2 are supported but processors can’t be mixed and any processor with a TPD 130W or over will get the Performance Heatsink (871246-B21).

    HPE DL360 Gen10 Maximum Internal Storage
    Chassis Options
    HPE Proliant DL360 Gen 10 4 LFF Chassis

    4x3.5" LFF

    HPE Proliant DL360 Gen 10 8 SFF Chassis

    8x2.5" SFF

    HPE Proliant DL360 Gen 10 2 SFF Universal Front Drive Cage

    8 SFF + 2 SFF

    HPE Proliant DL360 Gen 10 8 SFF Universal Chassis

    10x2.5" SFF Universal

    HPE Proliant DL360 Gen 10 Rear 1 SFF Universal Chassis

    Rear Drive 1 SFF



    When you install the 2 SFF NVMe Backplane Kit (871242-B21), it comes with a special Primary Riser that has 1 NVMe connection to support up to 2 SFF NVMe drives. This NVMe Riser also comes with both default PCI slots, x16 in slot 1 and x8 in slot 2.

    For 10 NVMe chassis – A secondary Riser is not available due to the 10 x4 NVMe riser. When the 10 SFF NVMe/SAS backplane ( 867974 -B21) option is installed, NVMe drives must be installed in bays 9 and 10. The other bays support a mix of NVMe and SAS drives.

    MegaRAID TRI-MODE Controller

    DL360 Gen10 with Broadcom MegaRAID controllers only supports Basic Carrier (BC) SFF SAS/SATA storage devices. Do not attempt to use Smart Carrier storage devices in these DL360 models with MegaRAID controllers. Mixing of BC and SC carrier types is not allowed. NVMe is not supported with DL360 Gen10 with MegaRAID storage controllers. This CTO Server contains default SAS/SATA drive cage/backplane and tri-mode to SAS/SATA cables. There is also a 8SFF SAS/SATA PCIe Slot2 Tri-Mode Cable Kit (P55884-B21).

    If you install the 2SFF SAS/SATA 12G BC Drive Cage Kit (P26435-B21). It is mandatory you install the 2SFF SAS/SATA Tri-Mode Cable Kit (P55883-B21).

    HPE ProLiant DL360 Gen10 CTO Rack Server
    HPE DL360 Gen10 M.2 Drives

    The DL360 Gen10 has the normal Stand-up PCIe card that holds two M.2 Drives. But it also has a unique option of adding the M.2 2280 Primary Riser kit ( 867978 -B21). This Riser kit not only has the x16 PCIe slot but also has 2x M.2 2280 Drive slots. You can only install the 2280 Type M.2 drives with this PCIe riser. This PCIe riser is a great way to save a PCIe slot but still has the M.2 drives installed. For any major release beyond VMware ESXi 7.x, VMware will require M.2 or another local persistent device as the standalone boot option.

    Want more M.2 drives, the DL360 supports the uFF Drive type as a 1xDual uFF (2x M.2) rear drive or as the optional 2xDual uFF (4x M.2) drives in the front of the chassis. If you install the Rear Drive cage you will lose an FH PCIe slot in the primary riser Slot 1.

    HPE DL360 Gen10 PCIe Risers

    The DL360 Gen10 Rack Server has 3 PCIe slots over two Riser Cages. The Secondary Riser has 1 Slot. The Primary Riser Cage is a butterfly riser and holds 2 Slots.

    M.2 Primary Riser

    The Primary Riser has a unique option to save a PCIe slot when installing M.2 Drives. If you install the Primary SATA M.2 Riser (867978-B21), you will have two M.2 Slots on the riser card. This card only supports the 2280 M.2 Type drives.

    GPU Primary Riser

    The GPU primary riser is the GPU Riser which has a power source on the riser card to make cabling easier for the GPU.

    NVMe Drives

    When you install the 2 SFF NVMe Backplane Kit (871242-B21), it comes with a special Primary Riser that has 1 NVMe connection to support up to 2 SFF NVMe drives. This NVMe Riser also comes with both default PCI slots, x16 in slot 1 and x8 in slot 2.

    Rear Drives Primary Riser

    Installation of the rear drive takes away the FH slot 1 from the riser to allow a single drive cage to be installed in the rear while also providing an x8 PCIe slot 2.

    If a secondary full-height kit is installed, then primary PCIe Slot #2 cannot be used. Only 2 full height slots are supported. If you install a Rear drive, you will lose the Primary Riser FH Slot 1.

    If you install the 10SFF Premium backplane kit (867974-B21). This kit comes with a secondary riser that has 5 NVMe ports.

    Expansion Slot # Technology Bus Width Connector Width Processor Slot Form Factor
    Primary GPU Riser (875545-001) 1 PCIe 3.0 x16 x16 CPU1 Full-Height, 3/4 Length (up to 9.5in)
    2 x8 x8 CPU1 Low Profile
    Primary SATA M.2 Riser (867978-B21) 1 x16 x16 CPU1 F ull-Height, 3/4 Length (up to 9.5in)
    2 x16 x16 CPU1 Low Profile
    Primary 2SFF NVMe Riser (871242-B21) 1 x16 x16 CPU1 F ull-Height, 3/4 Length (up to 9.5in)
    2 x8 x8 CPU1 Low Profile
    Secondary 5-port 10SFF NVMe/SAS Premium backplane kit (867974-B21) 3 CPU2 Low Profile
    Secondary LP Riser (867982 - B21) 3 x16 x16 CPU2 Low Profile
    Secondary FH Riser (P23271-B21) 3 x16 x16 CPU2 F ull-Height, 3/4 Length (up to 9.5in)
    HPE DL360 Gen10 Cooling

    The DL360 Gen10 Rack Server has Fan Redundance for each model. When you select the first CPU, 5 fans will come with it. When you select the second processor, 2 Fans will come with it. If you need to upgrade to the Performance Fans, this kit (871244-B21) will come with 7 fans. If you choose to install the 2 NVMe front drive on the 8SFF Chassis or install the HPE DL360 Gen10 10SFF Premium Backplane Kit (867974 -B21). You will need to upgrade the fans. If you install Computation or Graphics Accelerators, you will also need to upgrade the fans.


    For 4 LFF and 8 SFF chassis:
    • 1 CPU – Includes 5 standard fans
    • 2 CPUs – Includes 7 standard fans
    For 10 NVMe Premium chassis:
    • 2 CPUs – Includes 7 high-performance fans as standard
    HPE DL360 Gen10 GPU / Workload Accelerator

    When installing the GPU FH Primary Riser (P23271-B21) option the GPU sits in Slot1. If you want to install a second GPU or if Slot 1 is taken. You can install the FH Secondary Riser and install the GPU in Slot 3. You will need two Processors for this and upgrade the fans.

    There is one small adjustment that needs to be made if you have a Type-A Smart Array card installed. You will need to install the LH controller (869083-B21) to allow the GPU to fit in slot 3. This GPU Enablement v2 Kit (P23271-B21) is not available on the 10 NVMe model. Slot 3 is taken up by the NVMe riser for direct attached drives.

    HPE ProLiant DL360 Gen10 CTO Rack Server
    HPE DL360 Gen10 Flex Slot your power!

    Mixing of 2 different power supplies is NOT supported.
    HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.

    More Info

    Rear drive option available on all DL360 Gen10 chassis types for additional boot/storage: +1SFF or 1 Dual uFF (2x M.2 cartridges).
    NC Chassis don’t have the Embedded 1Gb Ethernet 4-Port 331i Adapter.
    BC Chassis can use the Broadcom MegaRAID and is not compatible with SC (smart carrier) Drives.
    When the 10SFF NVMe/SAS backplane option is installed, bays 9 and 10 ONLY support NVMe Drives. The other bays support a mix of NVMe and SAS drives
    “U” processors (i.e. 6212U) only supported in single socket configurations
    A maximum of 12 NVDIMMs are supported with 1st generation Intel Xeon Scalable processors.
    A maximum of 12 HPE Persistent Memory supported with 2nd generation Intel Xeon Scalable Processor series (Platinum 8200, Gold 6200, Gold 5200, Silver 4215 and 4215R)

    HPE DL360 Gen10 Lights Out! iLO

    Monitor your servers for ongoing management, service alerting, reporting, and remote management with HPE iLO.

     

    Current Configuration

    Server Chassis

    HPE Processors

    Bezel and Security (Optional)

    Blanks (Optional)

    Cable Kit (Optional)

    HPE RDIMM LRDIMM Gen 1 (Optional)

    HPE NVDIMM (Optional)

    HPE RDIMM LRDIMM Gen 2 (Optional)

    HPE Presistent Memory (Optional)

    HPE Drive Options (Optional)

    HPE LFF Drives SAS (3.5in) (Optional)

    HPE LFF Drives SATA (3.5in) (Optional)

    HPE SFF Drives SAS (2.5in) (Optional)

    HPE SFF Drives SATA (2.5in) (Optional)

    HPE NVMe SFF Drives (Optional)

    HPE Basic Carrier (BC) Drives (Optional)

    HPE PCI Riser Options (Optional)

    HPE M.2 Drives (Optional)

    HPE Networking Adapters (Optional)

    HPE FlexibleLOM Adapters (Optional)

    HPE Host Bus Adapters (HBAs) (Optional)

    HPE Storage Controller (Optional)

    HPE Accelerators (Optional)

    HPE Mixed Options (Optional)

    HPE Rail Kit (Optional)

    HPE iLO Server Management (Optional)

    Power Supply Unit (PSU)

    ECS Warranty

    *list also serves as quick links to each section

    Welcome to the Request Express Quoting Form!

    for: HPE ProLiant DL360 Gen10 CTO Rack Server


    This streamlined form is designed to simplify the quoting process for you. Whether you're uncertain about specific parts or seeking a hassle-free experience, you're in the right place.

    Provide us with the necessary details, and we'll generate a customized quote for your server. Even if you're unsure about the exact components you need, we've got you covered. Our team will tailor a solution based on the information you provide.

    Let's get started!
    Simply fill out the form, and we'll take care of the rest.


    Name *
    Email *
    Message *
    Preferred Brand
    Form Factor
    Rack Unit of Height (#U)
    Processor(s)
    Memory
    Total Amount of Memory
    Total Amount of Usable Storage

    Storage Type


    RAID

    List Networking Connection needed:
    Rack Space Restrictions
    Which OS do you plan on using:


    Price as Configured: 0

    Add to Cart

    Error Submitting Cart. Please get in touch with us for support.

    Please select all the mandatory items in the configuration list before submitting the cart.

    One or more items in your cart has no price. This will be submitted as a "Request for a Quote".

    Product Specs

    Shipping Information

    Express Computer Systems can ship to virtually any address in the world and provides you with the best shipping rates possible. Cost of shipping varies depending on what service you require, your destination and size of the shipment. Shipping costs will be calculated separately from your order and billed to you post purchase. In the notes section of your order please provide us with your preferred shipping method and we will get back to you.

    Custom configured orders ship within 2 business days after all required products are in stock.

    Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine, California.

    Domestic Shipments
    • Standard Ground
      • Shipping time: 2-7 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-10 business days
      • Excludes weekends, holidays or weather delays.
    • 3 Business Days
      • Shipping time: 3 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 3-6 business days
      • Excludes weekends, holidays or weather delays.
    • 2 Business Days
      • Shipping time: 2 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-5 business days
      • Excludes weekends, holidays or weather delays.
    • Overnight / Next Business Day
      • Shipping time: 1 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 1-4 business days
      • Excludes weekends, holidays or weather delays.
    International Shipments
    • International Economy
      • Shipping time: 4-6 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 5-9 business days
      • Excludes weekends, holidays or weather delays.
    • International Priority
      • Shipping time: 1-3 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-6 business days
      • Excludes weekends, holidays or weather delays.

    For more information on shipping view our Shipping Information page or send us a message

    Subscribe