Please remove $0 item(s) from cart - or - Request for Quote

This website performs best when viewed from a Desktop

All

  • All
  • AMD
  • APC
  • Avago
  • Brocade
  • Cisco
  • Dell
  • Dell CTO
  • ECS
  • EMC
  • EqualLogic
  • Express Computer Systems
  • Hitachi
  • HPE
  • Hynix
  • IBM
  • Intel
  • Mellanox
  • Micron
  • NetApp
  • Nvidia
  • OEM
  • Samsung
  • Seagate
  • Toshiba
  • Xilinx

    Dell PowerEdge XR8620t 2U Node Server Chassis w/LOM

     
    Price: Request a Quote

    Brand:  
    MPN:  
    DPE-XR8620t-Chassis-wlom
    Type:  
    Chassis
    Condition:  
    ECS Refurbished & Tested

    Request Quote

    Note: Please include as much details and relevant options about the item to help us match your request with an accurate price.


    -PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
    -SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.

    Dell PowerEdge XR8620t 2U Node Server Chassis w/LOM

    This Node comes with the 2 x 25 GbE SFP 28 LOM connectors

    Quick Specs

    Form Factor:

    XR8620t: 2U Rack Server

    Processor | Max: 32 Cores

    1 x 4th Generation Intel® Xeon® Scalable processor with optional vRAN boost up to 32 cores

    Memory | Max: 512GB

    8 DDR5 RDIMM 4800Mhz

    Storage | Max: N/A

    XR8620t: BOSS N1 with 2 x 2280 NVMe SSDs RAID 0/1
    OR, 2x Dual M.2 NVMe direct Riser Module (non-RAID)

    RAID Controller:

    BOSS-N1 with RAID 0/1

    Boot Options:

    BOSS N1

    LOM:

    None

    Remote Management:

    iDRAC9 with Lifecycle Controller

    PCIe Slots:

    XR8610t: 1 x16 Gen5
    XR8620t: 3 x16 Gen5

    GPU:

    None

    Ideal for:

    • Centralized RAN
    • Distributed RAN
    • Edge Servers
    • Military
    • Point-of-Sale (POS)
    Dell Technology’s multi-node, short depth, dense compute for the edge

    Experience ultimate flexibility at the edge with Dell’s purpose-built server featuring an innovative sled-based architecture positioned to take us farther than any other Edge product. Designed for a broad range of workloads with the flexibility to extend from RAN at the cell site to AI/ML on a factory floor. This short-depth Class 1 server delivers high-performance compute in the harshest of environments with TCO at the center of every design decision.


    Dell PowerEdge XR8000 Sleds
    Ultimate Flexibility for Scalability
    Choose from multiple sled configurations with up to 4 nodes per chassis to meet all your growing and changing workloads.
    • 1U and 2U sled options for optimum compute configurations enabling common platforms across Core, Edge, Far-edge, and RAN
    • 4th generation Intel® Xeon® Scalable Processors up with optional vRAN boost upto 32 cores
    • Both DC and AC power supply options

    TCO Optimized Design

    Reduce support and maintenance costs, decrease service outages, and capitalize on energy savings

    • Advanced system power design enables dual PSUs to support up to 4 sleds
    • Integrated fan infrastructure to support higher efficiency cooling
    • Compute, power, sleds and chassis are serviceable separately simplifying field maintenance
    Dell PowerEdge XR8000 Modular Rack Server Chassis

    Purpose-built for the Edge

    Achieve high-performance compute in any environment.

    • BBuilt rugged to operate in temperatures from -5°C to 55°C
    • Offers easy serviceability with front I/O and power
    • Short-depth (430 mm) chassis to fit in space-constrained environments
    Cyber Resilient Architecture for Zero Trust IT environment & operations

    Security is integrated into every phase of the PowerEdge lifecycle, including protected supply chain and factory-to-site integrity assurance. Silicon-based root of trust anchors end-to-end boot resilience while Multi-Factor Authentication (MFA) and role-based access controls ensure trusted operations.

    Sled Options
    2U XR8620t Sled Highlights Dell PowerEdge 2U XR8620t Sled for the XR8000r Modular Rack Server
    Dell PowerEdge XR8000 Modular Rack Server CTO Spec Sheet
    XR8620t - Installation Service Manual

    • 4th generation Intel® Xeon® Scalable Processor and with optional vRAN boost up to 32 cores
    • 2 x FHHL (up to 125W) 1 x FHHL (up to 45W) (Gen5)
    • Up to 2 x M.2 NVMe BOSS N1 ET
    • 8 memory slots; up to 512 GB total
    • Optional RAID
    • -5°C to 55°C operating temperature
    • Hot-swap fans are not supported.
    • Minimum cold boot temperature +5°C w/o Heater Manager subsystem.
    • Minimum cold boot temperature -20°C with Heater Manager subsystem.
    • Dual PSUs are required while ambient ≥ 55°C.
    • Only PSU with eTemp range is supported for NEBS3 H, GR3108C1 L & GR3108C1+ environment class.
    • Non-Dell PCIe Cards are not supported.
    • DIMM Blank is required in empty slots.
    • Sled blank is required in empty slots.
    • PCIE blank is required in empty slots for slot-1&2.
    • PCIE blank is required in empty slot for slot-3.
    • PSU blank is required in empty slot.
    • Heater Module is not supported with Intel Ethernet 100G 2P E810-2C.
    Dell PowerEdge XR8000 Modular Rack Server Base Knowledge

    The XR8000r is a 2U Modular Rack Enclosure that supports up to 4x 1U Nodes, 2x 2U Nodes or a mix of both. 2x 1U + 1x 2U Nodes. Each node has 1 CPU and up to 2x M.2 NVMe Drives with 8 DDR5 RDIMMs to support up to 512GB of memory per node.


    Support for two 2U nodes, four 1U nodes, or a mix of two 1U and one 2U node

    • 4 x 1U Half-width sleds
    • 2 x 1U Half-width sled and 1 x 2U Half-width sled
    • 2 x 2U Half-width sleds
    Image of the XR8000r Rugged Rack Server by Dell.
    Heatsink & Fans

    Both Sleds support 1 CPU with a standard heatsink. The PowerEdge XR8610t system supports up to four cabled cooling fans.
    The PowerEdge XR8620t system supports up to eight cabled cooling fans.

    Image of the Fan Cage for the Dell XR8620T 2U Node Server.
    Memory

    No matter which configuration you choose. Each node can support up to 8 DDR5 channels with 1 DIMM Per channel; 8 DIMMs total. These 8 DIMMS can reach speeds up to 4800MT/s (configuration-dependent). The maximum amount per DIMM is 64GB with a total of 512GB with 4 Nodes.

    DIMM Type Rated DIMM Speed (MT/s) DIMM Volts (V) DIMM Capacity (GB) Ranks per DIMM Data Width
    RDIMM 4800 1.1 16 1 x8
    32 2 x8
    64 2 x4
    Expansion Slots

    This Node DOES NOT COME with the 2x 25 GbE SFP 28 LOM connectors. The NC stands for Network Choice, meaning you must choose a NIC adapter for networking.


    The PowerEdge XR8000 does not have a “no riser” option and only supports one riser config option: Riser 1 on 1U/2U sled, and Floating Riser on 2U sled. Shown below are details on the two risers supported on the PowerEdge XR8000. XR8610t 1 x16 PCIe (Gen5) slot
    XR8620t 3 x16 PCIe (Gen5) slots

    Riser Configs PCIe slots Expansion card riser Processor connection Height Length Slot width
    XR8610t 1U Riser Config
    R2A
    Slot 1 R2A Processor 1 Full Height Half Length x16 PCIe (Gen5) Single width
    XR8620t 2U Riser Config
    R1A + R2A
    Slot 1 R1A Processor 1 Full Height Half Length x16 PCIe (Gen5)
    Slot 2 R1A Processor 1 Full Height Half Length x16 PCIe (Gen5)
    Slot 3 R2A Processor 1 Full Height Half Length x16 PCIe (Gen5)
    Image of Riser 2A on the Dell XR8000r Rugged Rack Server. Riser 1A (R1A)
    XR8620t:

    The 2U R1A Riser connects the riser card power cables to 2U PDB and 4x signal cables to connectors on the system board. This riser has 2 x16 PCIe (Gen5) Single width FH/HL Slot.

    Optional Networking

    This Node comes with the 2 x 25 GbE SFP 28 LOM connectors


    No matter which Node/Sled you choose, the system can be configured with or without a Broadcom 57414 2x 25 GbE SFP28 onboard LOM (LAN on Motherboard). These networking ports are optional. The option "NC" (Network Choice) indicates that the system board does not include the 2x 25 Gbps ports. In this case, you will need to install a PCIe NIC to enable the server to connect to the network.

    Image of the Optional LOM ports on the Dell XR8000 Node Server from Dell.
    Storage

    Both Sleds support the BOSS-N1 M.2 Carrier and the 2U XR8620t also support a NON-RAID M.2 Riser. The BOSS-N1 Riser holds 2 x M.2 2280 and supports RAID 0/1. The XR8620t M.2 NON-RAID Riser can support 2 x M.2 2280 and M.2 22110 drives.

    The BOSS-N1 riser sits on the bottom 1U sled while the M.2 NVMe Riser sits on the second level of the 2U Sled. The 2U XR8620t can only support 1 at a time while the XR8610t only supports the BOSS-N1 option.

    Rugged Heat Manager subsystem(HM)
    What is a Heat Manager subsystem (HM)?
    Heater Manager subsystem (HM) will pre-heat the system to above 5C before the system can power on.

    With a system like the XR8000 that supports Radio Access Network (RAN), these Telco systems are deployed in remote locations where the systems need to operate in extended (-20C to 39 65C) or extreme (-20C to 55C) temperature ranges. As many of the hardware components (such as iDRAC, 40 CPU, DIMM, SSD, etc.) used in the system cannot operate below 0C, the system needs to be pre-heated to above 5C before the system can power on. The Heater Manager subsystem (HM) will pre-heat the system, and make sure all the heater zones (9 zones total) are above 5C. The HM will heat the system as needed such that the temperature of all zones will be above 5C.

    Restrictions
    • Heater Manager subsystem (HM) is only supported in 2U XR8620t.
    • Heater Manager subsystem (HM) heating from -20C to system start booting: 4 minutes
    • The max power draw per 2U HM sled is about 750W during the preheat process
    9 Heating Zones
    System Zone Heating Item Heater pad location
    Lower U 1 CPU Top of CPU heatsink
    2 DIMM Back of PCB
    3 DIMM Back of PCB
    4 Lower U PCIe Riser Slot3 PCIe back of PCB
    5 PCH, BMC, CPLD, and LOM Back of PCB
    6 Not Used -
    Upper U 7 ROR-N1 or M.2 NVMe A side Under AL plate & beneath M.2
    7 ROR-N1 or M.2 NVMe B side Under AL plate & beneath M.2
    8 ROR-N1 RAID chip Top of Raid Controller
    9 Upper U PCIE Riser Slot2 On the back of PCIe Card
    10 Upper U PCIE Riser Slot1 On back of Bracket

    Image of Zone 4 Riser 2 Slot 3 on the XR8620t Node Server By Dell. Zone 4 Riser 2 Slot 3
    Image of Zone 7 M.2 Riser on the XR8620t Node Server By Dell. Zone 7 M.2 Riser
    Image of Zone 8 RoR-N1 on the XR8620t Node Server By Dell. Zone 7 & 8 RoR-N1
    Image of Zone 9 n 10 Riser 1 Slot 1 n 2 on the XR8620t Node Server By Dell. Zone 9 & 10 Riser 1 Slot 1 & 2
    Power Supply Units

    The XR8000r Modular Rack Server only supports two 60MM Reverse Airflow (RAF) PSUs. AC and DC options are available. Do not mix PSU. The PSUs with blue straps are designed for reverse airflow (RAF). This chassis has front access to the node servers and the PSUs. This means the Fans are in the rear of the server nodes and they pull air out of the chassis. Normal AirFlow (NAF) Pushes Airflow into the chassis.

    Image of Reverse Airflow (RAF) in the Dell XR8000 Node Server from Dell.
    Dimensions & Weight
    XR8000r
    • Height 87.05 mm (3.42 inches)
    • Width 482 mm (18.97 inches) with mount ear
    • Width 448 mm (17.63 inches) without mount ear
    • Depth 430 mm (16.92 inches) cable management to rear wall
    • Depth 350 mm (13.77 inches) mounting surface to rear wall
    • Weight 18.52 kg (40.84 pounds)
    XR8620t
    • Height 83.28 mm (3.28 inches)
    • Width 184.8 mm (7.28 inches)
    • Depth 433.5 mm (17.07 inches)
    • Weight 5.25 kg (11.57 pound)

    Looking to Customize?

    Need assistance with customization? Our sales experts will help you choose the best setup for your needs.

    Start Customizing Today!

    Product Specs

    Shipping Information

    Express Computer Systems can ship to virtually any address in the world and provides you with the best shipping rates possible. Cost of shipping varies depending on what service you require, your destination and size of the shipment. Shipping costs will be calculated separately from your order and billed to you post purchase. In the notes section of your order please provide us with your preferred shipping method and we will get back to you.

    Custom configured orders ship within 2 business days after all required products are in stock.

    Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine, California.

    Domestic Shipments
    • Standard Ground
      • Shipping time: 2-7 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-10 business days
      • Excludes weekends, holidays or weather delays.
    • 3 Business Days
      • Shipping time: 3 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 3-6 business days
      • Excludes weekends, holidays or weather delays.
    • 2 Business Days
      • Shipping time: 2 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-5 business days
      • Excludes weekends, holidays or weather delays.
    • Overnight / Next Business Day
      • Shipping time: 1 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 1-4 business days
      • Excludes weekends, holidays or weather delays.
    International Shipments
    • International Economy
      • Shipping time: 4-6 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 5-9 business days
      • Excludes weekends, holidays or weather delays.
    • International Priority
      • Shipping time: 1-3 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-6 business days
      • Excludes weekends, holidays or weather delays.

    For more information on shipping view our Shipping Information page or send us a message

    Subscribe