Your Cart is Empty
4 LFF
8 SFF
8+2 SFF
20x E3.S EDSFF
Base Standard Capabilities
| Technical specifications | HPE ProLiant DL360 Gen11 |
|---|---|
| Processor type | Intel |
| Processor family | 4th Generation Intel® Xeon® Scalable Processors |
| Processor number | 1 or 2 |
| Processor core available | 8 to 60 core depending on processor. |
| Processor cache | 12 - 60 MB L3. depending on processor |
| Processor speed | 3.7 GHz, maximum depending on processor. |
| Power supply type | HPE 500W Flex Slot Platinum Hot Plug Power Supply, HPE 800W Flex Slot Platinum Hot Plug Power Supply, HPE 800W Flex Slot Titanium Hot Plug Power Supply, HPE 1000W Flex Slot Titanium Power Supply, HPE 1600W Flex slot Platinum Hot Plug Power Supply, HPE 1600W DC Power supply, HPE 1600W Flex Slot -48VDC Hot Plug Power Supply, HPE 1800W-2200W Flex Slot Titanium Hot Plug Power Supply (to be available CQ4 2023), depending on model. |
| Expansion slots | Maximum 3 PCIe Gen5 slots and maximum 2 OCP 3.0 PCIe5 slots. |
| Maximum memory | 4.0 TB per socket. when populated with 256 GB DDR5 |
| Memory slots | 16 DIMM slots per socket |
| Memory type | HPE DDR5 SmartMemory |
| Memory protection features | HPE Fast Fault Tolerant Memory Advanced ECC Memory Online Spare Memory Mirrored Memory |
| Optical drive type | Optional - HPE 9.5mm SATA DVD-RW Optical Drive, HPE Mobile USB DVD-RW Drive. |
| System fan features | Standard Fan Kit (Q'ty 5), Standard Fan Kit (Q'ty 2) for 2nd Processor, Performance Fan Kit (Q'ty 7), Close Loop Liquid Cooling Heatsink & Fan kit, Direct Liquid Cooling Solution (Shipment will be available CQ3 2023), depending on model. |
| Network controller | Wide range of speeds, cabling, chipsets and form factors (PCIe stand-up adapter and OCP3.0). Please see QuickSpecs for network card choices. |
| Storage controller | Included - Embedded SATA controller (AHCI or Intel SATA software RAID controller) Optional - HPE Smart Array Gen11 Storage Controller in Variety of protocols -including NVMe-, port count, array utilities, and form factors (PCIe stand-up adapter and OCP3.0). Please see QuickSpecs for storage controllers selection |
| DIMM capacity | 16 GB to 256 GB |
| Infrastructure management | Included - HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard (requires download). Optional - HPE iLO Advanced, and HPE OneView Advanced |
| Drive supported | Up to 4 LFF SAS/SATA HDDs or SSDs. Up to 8+2 SFF SAS/SATA HDDs or SATA/SAS/NVMe U.3 SSDs, depending on model. Up to 20 EDSFF E3.s 1T NVMe SSD. Up to 2 RAID1 NVMe M.2 Boot device (Internal modular or external accessible from rear wall). |
Technical Specs
| CTO Server | HPE DL360 Gen11 8SFF NC CTO Server |
|---|---|
| SKU Number | P52499-B21 |
| TAA SKU | P52499-B21#GTA |
| HPE Trusted Supply Chain | Optional: HPE Trusted Supply Chain for HPE ProLiant (P36394-B21) |
| Processor | Not included as standard. Optional: Qty 1 or 2 (2 processors must be selected in 20EDSFF NC CTO Server) |
| DIMM Slots | 32-DIMM slots |
| DIMM Blanks | DIMM Blanks are required, embedded and shipped as default in all CTO Servers |
| Storage Controller | Choice of Intel® VROC Software RAID capable; Choice of HPE ProLiant external hardware controller Choice of HPE ProLiant Gen11 MR and SR PCIe and OCP plug-in Controller, |
| PCIe Slots | Up to 3 Slots PCIe 5.0 (Slot 1, 2 &3) One standard primary/butterfly riser: 2 slots as Slot 1 & Slot 2 (1 x16 FH / 1 x16 LP) and 4 x8 front NVMe connectors Optional: Slot 3 in 1 x16 FH or LP slot All PCIe Slos are in design with up to 9.5” length |
| OCP3.0 Slots | PCIe 5.0: 2 slots (1x16/ 1x16) |
| Drive Cage – included | 8SFF – Optional backplanes in choice of: - 24G x1 NVMe/SAS U.3, or - 24G x4 NVMe/SAS U.3, TriMode supported, must be selected if internal drives needed. Basic carrier (BC) support. (PCIe4.0 storage) |
| Network Controller | "BCM 5719 1Gb 4p BASE-T OCP Adptr" to be defaulted in the configurator at OCP Slot 21.
Customer is allowed to remove and select other cards (PCIe of OCP) from Networking, InfiniBand,
Smart IO (HW) or Storage Offload category. Choice of OCP3.0 or stand-up cards for primary networking selection plus additional/optional stand-up networking adapters. Notes: − No embedded networking from motherboard. − In 1 Processor configuration, “CPU1 to OCP2 x8 Enablement Kit” will be selected as default as OCP NIC is pre-selected at OCP Slot 2, to be defaulted in the configurator if 1 Processor is selected. Customer is allowed to remove if OCP NIC is not selected but need to be replaced by a PCIe standup NIC. Meanwhile, the “CPU1 to OCP2 x8 Enablement Kit” will be removed. − “CPU2 to OCP2 x8 Enablement Kit” or “CPU2 to OCP2 x16 Enablement Kit” must be selected if OCP NIC is selected in 2 Processors configuration. − “CPU2 to OCP2 x8 Enablement Kit” to be defaulted in the configurator if 2 Processors are selected. User should be allowed to remove “CPU2 to OCP2 x8 Enablement Kit” and should be forced select “CPU2 to OCP2 x16 Enablement Kit” if OCP NIC is selected. Customer is allowed to remove if OCP NIC is not selected but need to be replaced by a PCIe standup NIC. Meanwhile, the “CPU2 to OCP2 x8 Enablement Kit” will be removed. − In 20EDSFF CTO model, either no OCP enablement kit or “CPU2 to OCP2 x8 Enablement Kit” can be selected from the limited PCIe5.0 electrical lanes from OCP Slot 1 (x8) and OCP Slot2 (x8). |
| Fans | Choice of
|
| Management | HPE iLO with Intelligent Provisioning (standard) HPE GreenLake for Compute Ops Management (a 3-year subscription included) Optional: iLO Advanced and OneView |
| Video Output | Rear: 1 VGA Optional:
|
| USB | Front: 1 USB 3.2 Gen1 + iLO service port Rear: 2 USB 3.2 Gen1 Internal: 1 USB 3.2 Gen1 + 1 USB2.0 Optional: 1 Front USB 2.0 |
| Security | Trusted Platform Module (TPM) 2.0. It is an embedded feature and can be disabled in the BIOS
setting. Notes: Disabled for shipments to China |
| Rail Kit | Optional Easy Install rails and CMA
|
| Form Factor | 1U Rack |
