Menu
0
0

Your Cart is Empty

CTO Servers

CTO Rack Servers

CTO Tower Servers

CTO Blade Servers

  • CTO Rack Servers

  • CTO Tower Servers

  • CTO Blade Servers
    • CTO Storage

    NetApp Storage

    EMC Storage

    HPE Storage

    EqualLogic Storage

  • NetApp Storage

  • EMC Storage

  • HPE Storage

  • EqualLogic Storage
    • HPE
  • HPE CTO Servers
  • Refurbished HP ProLiant Servers
  • HPE Storage Solutions
  • HPE Networking
  • HPE Server Components
    • Dell
  • Dell Hyper Converged Chassis
  • Dell CTO Servers
  • Dell CTO Storage
  • Dell Switch Series
  • Dell Components
    • NetApp
    NetApp Components
  • NetApp All Flash
  • NetApp Filer Heads
  • NetApp Disk Shelves
  • NetApp Drives
  • NetApp Components
  • NetApp Components
    • EMC
    Dell EMC Unity Storage Arrays Hybrid and All Flash
    Dell EMC VNXe Storage Arrays
    EMC VNX Storage Arrays
    EMC VNX Drives
  • Dell EMC Unity Storage Arrays Hybrid and All Flash
  • Dell EMC Unity | XT
  • Dell EMC VNXe Storage Arrays
  • EMC VNXe
  • EMC VNX Storage Arrays
  • EMC VNX
  • EMC VNX Drives
  • EMC Drives
  • EMC Components
    • EqualLogic
  • EqualLogic PS Series
  • EqualLogic Drives
  • EqualLogic Components
    • Cisco
  • Cisco Servers CTO
  • Cisco Components
    • Previous | Next
    Home / Virtualization / Cisco UCS B200 M4 Blade Server CTO
    Cisco UCS B200 B-Series M4 2x 2.5" SFF CPU v4 Blade Server CTO
    Cisco UCS B200 B-Series M4 2x 2.5" SFF CPU v4 Blade Server CTO
    Cisco UCS B200 B-Series M4 2x 2.5" SFF CPU v4 Blade Server CTO
    Cisco UCS B200 B-Series M4 2x 2.5" SFF CPU v4 Blade Server CTO
    Cisco UCS B200 B-Series M4 2x 2.5" SFF CPU v4 Blade Server CTO
    Cisco UCS B200 B-Series M4 2x 2.5" SFF CPU v4 Blade Server CTO
    Cisco UCS B200 B-Series M4 2x 2.5" SFF CPU v4 Blade Server CTO
    Cisco UCS B200 B-Series M4 2x 2.5" SFF CPU v4 Blade Server CTO
    Cisco UCS B200 B-Series M4 2x 2.5" SFF CPU v4 Blade Server CTO
    Cisco UCS B200 B-Series M4 2x 2.5" SFF CPU v4 Blade Server CTO

    Current Configuration

    (List below serves as quick links to each section)

    Select Chassis

    Select Processor

    Select Memory v4

    Select Memory v3

    Select Memory Mode

    Select RAID Controller v3

    Select RAID Controller v4

    Select HDD v3

    Select SSD v3

    Select HDD v4

    Select SSD SAS v4

    Select SSD SATA v4

    Select NVMe SSD v4

    Select Adapter v3

    Select Adapter v4

    Select Trusted Platform Module

    Select Secure Digital Cards

    Select Internal USB 3.0 Drive

    Select Warranty

    The request has been sent.
    Thank you.

    Price as Configured:
    $0

    Price as Configured:
    $0

    Add to Cart

    Error Submitting Cart. Please get in touch with us for support.

    Please select all the mandatory items in the configuration list before submitting the cart.

    One or more items in your cart has no price. This will be submitted as a "Request for a Quote".

    Cisco UCS B200 M4 Blade Server CTO

    Cisco

    | CTO Servers |

    UCSB-B200-M4-CTO

     

    Configure for Pricing

    READ ME

    • Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
    • “Quote” items can be added to your cart and sent to us via the cart page
    • Click the blue bar to close/open a section from view after choosing your options

    Select Chassis

    Select Processor

    If the mezzanine slot is either empty or contains a Port Expander Card for VIC, only 1 CPU is required, although you may install 2 CPUs.

    E5-2600 v3 Series

    E5-2600 v4 Series

    Select Memory v4 (Optional)

    Do not mix RDIMMs, LRDIMMs, TSV-RDIMMs

    Select Memory v3 (Optional)

    Do not mix RDIMMs with LRDIMMs
    Do not mix 64GB DDR4-2133-MHz TSV-RDIMMs with any other DIMMs

    Select Memory Mode (Optional)

    When using mirroring, DIMMs must be installed in identical pairs across paired DDR4 buses.

    Select RAID Controller v3 (Optional)

    For more information, please look at the features below.

    Select RAID Controller v4 (Optional)

    For more information, please look at the features below.
    UCSB-LSTOR-PT for NVMe drives only

    Select HDD v3 (Optional)

    The UCS B200 M4 can be ordered with or without drives.

    Select SSD v3 (Optional)

    The UCS B200 M4 can be ordered with or without drives.

    Select HDD v4 (Optional)

    The UCS B200 M4 can be ordered with or without drives
    For RAID’ed configurations, if you select two drives, they must be identical in type (HDD or SSD) and capacity.

    Select SSD SAS v4 (Optional)

    The UCS B200 M4 can be ordered with or without drives
    For RAID’ed configurations, if you select two drives, they must be identical in type (HDD or SSD) and capacity.

    Select SSD SATA v4 (Optional)

    The UCS B200 M4 can be ordered with or without drives
    For RAID’ed configurations, if you select two drives, they must be identical in type (HDD or SSD) and capacity.

    Select NVMe SSD v4 (Optional)

    NVMe SFF 2.5” drives are not bootable.
    NVMe SFF 2.5” drives cannot be controlled with a UCSB-MRAID12G or UCSB-MRAID12G-HE RAID controller.
    Two CPUs must be ordered when one or two NVMe SFF 2.5” drives are ordered.

    Select Adapter v3 (Optional)

    You must have VIC 1340 mLOM or VIC 1240 adapter installed in order to have I/O connectivity.
    Only the VIC 1340 or 1240 adapter plugs into the mLOM slot. All other adapters plug into the mezzanine adapter slot.
    You must have a B200 M4 configured with 2 CPUs to support cards that plug into the mezzanine connector
    The VIC 1340/1380 are only supported with the 6200 Series Fabric Interconnects.
    The VIC 1240/1280 are supported with both the 6200 and 6100 Series Fabric Interconnects.
    Do not mix Fusion io storage accelerator families. That is, do not mix “MP” or “MS” (ioMemory3) with “M” (ioDrive2) family cards.

    Select Adapter v4 (Optional)

    You must have VIC 1340 mLOM adapter installed in order to have I/O connectivity.
    Only the VIC 1340 adapter plugs into the mLOM slot. All other adapters plug into the mezzanine adapter slot.
    You must have a B200 M4 configured with 2 CPUs to support cards that plug into the mezzanine connector
    The VIC 1340/1380 are only supported with the 6200 Series Fabric Interconnects.

    Select Trusted Platform Module (Optional)

    CAUTION:
    If the Cisco UCS server (with Intel E5-2600 v4 or v3 CPUs) is running UCS firmware that added support for Intel E5-2600 v4 CPUs, then it will work with TPM version 2.0. However, if you downgrade the firmware and BIOS to a version earlier than Release 2.2(7) or earlier than Release 3.1(1), then you are vulnerable to a potential security exposure. See the following support matrix for TPM versions.

    Select Secure Digital Cards (Optional)

    Dual SDHC flash card sockets are provided on the front left side of the server
    Dual card support (mirroring) is supported.
    Select either one or two 128 GB, 64 GB, or 32 GB SD cards.
    Do not mix SD cards.

    Select Internal USB 3.0 Drive (Optional)

    NOTE:
    A clearance of 0.950 inches (24.1 mm) is required for the USB device to be inserted and removed.
    A “peephole” is provided on the RAID Controller so you can see the connector for the USB drive.

    Select Warranty

    Helpful Tip: Once desired configuration is selected click "Add to Cart".
    From the cart page you can submit a submit a quote request for best pricing

    Quick Specs

    • From Factory: Half-Width Blade Server
    • Processors | Max: 44 Cores
      2 x Intel E5-2600 (v3 or v4)
    • Memory | Max: 1.5TB
      24 2400MHz DDR4 DIMMs
    • Storage | Max: 7.6TB
      2 x SAS/SATA (NVMe v4 only)
    • Controllers: UCSB-MRAID12G (v3, v4),
      UCSB-MRAID12G-HE (v4),
      UCSB-LSTOR-BK (v3, v4),
      UCSB-LSTOR-PT (v4),
    • Adapters: 2 x Mezzanine Slots
    • Throughput I/O: 80 Gbps
    • GPU: Only supported with a v4 CPU
    Other Versions
    • UCS 5108
    Other Versions
    • UCS B200 M4
    • UCS B200 M5
    • UCS B200 M6

    The Cisco UCS B200 M4 Blade Server is a high-performance, half-width blade server designed to deliver exceptional computing power in a compact form factor. It supports up to two Intel Xeon E5-2600 v3 or v4 series processors, providing up to 44 cores per server. The server can accommodate up to 1.5TB of DDR4 memory across 24 DIMM slots, ensuring rapid data access and processing. For storage, it offers options for up to two 2.5-inch SAS, SATA, or SSD drives, allowing for flexible and high-speed data storage configurations. Integrated with Cisco's Unified Computing System (UCS) technology, the B200 M4 facilitates seamless management and scalability within data center environments.

    The Cisco UCS B200 M4 Blade Server is engineered to address the demanding requirements of modern data centers and enterprise applications. Its robust processing capabilities and substantial memory capacity make it ideal for workloads such as virtualization, database management, and high-performance computing. The server's flexible storage options cater to diverse data needs, from transactional databases to large-scale data analytics. By integrating with Cisco UCS Manager, the B200 M4 simplifies system management, enhances operational efficiency, and accelerates deployment times, making it a strategic choice for organizations seeking to optimize their IT infrastructure.

    Cisco B200 M4 mLOM Slot mLOM Slot
    • Dedicated Slot
    • 1340/1240 adapter only
    • Up to dual 4x10 Gbps ports w/ Expander

     

    The VIC 1340 is only supported with the 6200 and 6300 Series Fabric Interconnects. The VIC 1240 is supported by 6100, 6200, and 6300 Series Fabric Interconnects.

    Cisco B200 M4 Adapter Slot Adapter Slot
    • All other cards plug into the adapter slot
    • Supports Port Expander (4x10Gb)
    • Supports GPU

     

    Prot Expander vs Adapter. They both provide 40 Gbps to the Enclosure 5108, but the Adapter configuration provides redundancy.

    Cisco B200 M4 GPU G6 Card GPU G6 Adapter (v4 CPU ONLY)
    • Do not have network connectivity
    • GPU controlled by CPU 2
    • GRID 2.0 SW required for VDI

     

    The GPU is required when there is high-performance computing (HPC), machine learning, and virtualization.

    Current Configuration

    (List below serves as quick links to each section)

    Select Chassis

    Select Processor

    Select Memory v4

    Select Memory v3

    Select Memory Mode

    Select RAID Controller v3

    Select RAID Controller v4

    Select HDD v3

    Select SSD v3

    Select HDD v4

    Select SSD SAS v4

    Select SSD SATA v4

    Select NVMe SSD v4

    Select Adapter v3

    Select Adapter v4

    Select Trusted Platform Module

    Select Secure Digital Cards

    Select Internal USB 3.0 Drive

    Select Warranty

    The request has been sent.
    Thank you.

    Price as Configured:
    $0

    Add to Cart

    Error Submitting Cart. Please get in touch with us for support.

    Please select all the mandatory items in the configuration list before submitting the cart.

    One or more items in your cart has no price. This will be submitted as a "Request for a Quote".

    You may also like

    Welcome to the Request Express Quoting Form!

    This streamlined form is designed to simplify the quoting process for you. Whether you're uncertain about specific parts or seeking a hassle-free experience, you're in the right place.
    Provide us with the necessary details, and we'll generate a customized quote for your server. Even if you're unsure about the exact components you need, we've got you covered. Our team will tailor a solution based on the information you provide.

    Let's get started!
    Simply fill out the form, and we'll take care of the rest.

    Enter your name... *
    Enter your email address... *
    Message *
    Preferred Brand
    Form Factor
    Rack Unit of Height (#U)
    CPU QTY
    Cores (per)
    Speed (GHz)
    Total Amount of Memory
    Total Amount of Storage

    Storage Type

    RAID

    List Networking Connection needed:
    Rack Space Restrictions
    Which OS do you plan on using: