Please remove $0 item(s) from cart - or - Request for Quote

HPE ProLiant DL380 Gen11 24SFF NC CTO Server

Brand:
Type:
CTO Servers
Condition:
ECS Refurbished & Tested
-PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
-SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.

Multi-Quantity Discounts Available for ALL Line Items

** LARGE DISCOUNTS available for complete systems. Pricing displayed is for single item purchases **

Use the configuration tool to create your solution and submit it us for a quote OR send us a message with your complete build requirements to receive best pricing

READ ME

  • Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
  • “Submit for Quote” items can be added to your cart and sent to us via the cart page
  • Click the blue bar to close/open a section from view after choosing your options

Select Chassis

Select Processor

All SKUs below ship with a processor only. Adequate fans and heatsinks must be selected.
Mixing of 2 different processor models is NOT allowed.
Processors with TDP greater than 150W require High Performance Heatsink (P48818-B21).
8470Q processor is not supported with 12LFF CTO Server.

Platinum

supports up to 2 processors.

Gold

supports up to 2 processors.

Silver / Bronze

supports up to 2 processors.

Heat sinks / Fans / Cooling Modules

This section holds Heat Sinks, Fans, and DLC modules.
CPUs with TDP equal to or lower than 150W = Standard Heat Sink.
CPUs with TDP over 150W = High-Performance Heat Sink.
If you install the 8SFF Mid-Tray and your CPU TDP is over 150W. You will need to Low-Profile version of a High-Performance Heat sink (P48905-B21).
High-Performance Fan are required In general, when rear drives are installed, or CPU TDP > 205W, or High-Performance NVMe drives, three drive cages, mid-tray, GPU card, or certain backplanes are populated.
DLC Modules need certain cables to work. They are at the bottom of this list.
For all rules please read the manual or view each item to read the notes.

Memory

DIMM Blanks are optional and not required.
96GB memory cannot be mixed with any other memory.
Mixing of x4 and x8 memory is not allowed
Mixing of 3DS memory and non-3DS memory is not supported
256GB DIMM will also need to limit the maximum front-end cage to two.
Memory with larger than 128GB capacity will need High-Performance Fan Kit (P48820-B21) and ambient limitation.

Storage Devices (Optional)

Install an OCP 3.0 card in Slot 1 or 2 to save a PCIe slot.
When installing a OCP make sure the slot can support the card bus size. You might need to install an OCP enablement kit.

Storage Batteries & Cables (Optional)

Drive cage and backplane (Optional)

There are many Drive cages to choose from to upgrade the system from 24 SFF to 30 or even 38 drives.
Please view each item or read the manual to understand what items you will need when selecting some of these drive cages.

Small Form Factor SAS Drives HDD/SSD (Optional)

HDD Drives are at the bottom.

Small Form Factor SATA Drives HDD/SSD (Optional)

HDD Drives are at the bottom.

Small Form Factor NVMe Drives (Optional)

You will see Read Intense (RI) and Mixed Use (MU) Drives. Please read the drive name to make sure you are selecting the correct drive.

OS BOOT Device (Optional)

If the DLC NS204 (P62023-B21) is installed, you are not able to install the NS204i Boot Device. They take up the same slots.
If external accessible drives are needed please add trigger SKU P54542-B21 HPE ProLiant DL380 Gen11 NS204i-u FIO Bundle Kit.

Riser Card (Optional)

The Primary Riser shipping default in the CTO server is a x8 FH, FL, x16 FH, FL, and x8 FH, HL.
For a Secondary/Tertiary riser, the second processor is required.
x16 cards installed on x8 slots could observe sub-optimal performance.
Some risers require cables to support the first slot, which are at the bottom of this list.
NEBS risers cannot be mixed with other non-NEBS risers.
Please view the items or read the manual for all the detailed specs about the risers.

OCP Enablement (Optional)

If you install an x16 OCP card you will need to expand the OCP 3.0 slot from an x8 to and x16.

OCP cards (Optional)

Networking adapters below can be selected as the primary networking choice when configuring a Networking Choice (NC) Configure-to-Order (CTO) chassis. The DL380 Gen11 NC CTO chassis does not come with embedded networking, hence the requirement to configure with either a FlexibleLOM or select PCIe networking adapter.

Networking PCI (Optional)

Networking adapters below can be selected as the primary networking choice when configuring a Networking Choice (NC) Configure-to-Order (CTO) chassis. The DL380 Gen11 NC CTO chassis does not come with embedded networking, hence the requirement to configure with either a FlexibleLOM or select PCIe networking adapter.
Intel E810-CQDA2 (P21112-B21) is not supported when 3 drive cages are installed.

Infini Band PCI/OCP (Optional)

OCP 3.0 Cards at the top.
These OCP x16 cards are only supported in OCP slot 2. You must install the HPE ProLiant DL3XX Gen11 OCP2 x16 Enablement Kit (P48828-B21)

Fibre Channel HBA (Optional)

GPU (Optional)

with 8 PCIe slots this system can hold 8 Single Wide or 3 Double Wide GPUs.
Please view the items or the manual for all the details for each GPU.

Security (Optional)

If you install the Lock you will also need to select the Bezel.

Rail Kit (Optional)

The Easy Install Rail 3 Kit does not include a Cable Management Arm (CMA) (P22020-B21).

Power Cooling

Select a minimum (1), or maximum (2) power supplies.
All power supplies in a server should match. Mixing Power Supplies is not supported.

ECS Warranty

Helpful Tip: Once desired configuration is selected click "Add to Cart". From the cart page you can submit a submit a quote request for best pricing

What's New for DL380 Gen10
  • 4th Generation Intel® Xeon® Scalable Processor
  • Up to 2 Processors with 60 cores at 350W TDP
  • 16 DIMM DRR5 @ 4800MHz, Max Memory: 8 TB.
  • Support for PCIe Gen5, resulting in improved bandwidth, advanced data transfer rates, and higher network speeds from the PCIe Gen5 serial expansion bus.
  • HPE Integrated Lights-Out 6 (iLO 6) server management software that enables you to securely configure, monitor, and update your HPE ProLiant Gen11 servers seamlessly, from anywhere.
  • BOOT RAID M.2 boot options.
  • GPU Support, 8 single wide (SW) or 3 double wide (DW) GPUs

The HPE ProLiant DL380 Gen11 server is a scalable 2U 2P solution that delivers exceptional compute performance expandability and scalability for diverse workloads and environments at 1P economics. Powered by 4th Gen Intel® Xeon® Scalable Processors with up to 60 cores, increased memory bandwidth, and high-speed PCIe Gen5 I/O, the HPE ProLiant DL380 Gen11 server is a perfect dual-socket, 2U/2P, scalable solution.

The silicon root of trust anchors the server firmware to an HPE-exclusive ASIC, creating a fingerprint for the Intel® Xeon® Scalable Processor that must be matched exactly before the server will boot.


CTO Configuration Support

Need help with the configuration? Contact us today!

Since this Server is so large and has so many configurations, we have broken it up by chassis to make this information a little easier for you to digest.

HPE DL380 Gen 11 8 LFF Rack Server 8 LFF
HPE DL380 Gen 11 12 LFF Rack Server 12 LFF
HPE DL380 Gen 11 8 SFF Rack Server 8 SFF
HPE DL380 Gen 11 24 SFF Rack Server 24 SFF
HPE DL380 Gen 11 12 EDSFF Rack Server 12 EDSFF
Max Internal Storage
Drive Capacity Configuration
Hot Plug SFF SAS HDD 91.2 TB 24+8+6 x 2.4TB
Hot Plug SFF SAS SSD 583.3 TB 24 +8+6 15.35TB
Hot Plug SFF SATA HDD 76 TB 24+8+6 x 2 TB
Hot Plug SFF SATA SSD 291.84 TB 24 +8+ 6 x 7.68 TB
Hot Plug LFF SAS HDD 360 TB 12+4+4x 18 TB (with optional rear LFF drive cage)
Hot Plug LFF SATA HDD 360 TB 12+4+4 x 18 TB (with optional rear LFF drive cage)
Hot Plug SFF NVMe PCIe SSD 374.4 TB 24+ x 15.36TB + 6 x 960GB<10W (with optional rear Primary and Secondary 2SFF)
HPE ProLiant DL380 Gen11 24SFF Upgrades Options
Processor

The HPE DL380 GEn 11 supports up to 2 4th Generation Intel® Xeon® Scalable Processors. Processors do not ship with heatsinks or fan kits, these must be ordered separately. Processors with TDP equal to or greater than 150W through 350W require High-Performancea Heatsink (P48818-B21). Processors with TDP greater than 150W through 350W and mid-tray drive cage require HPE DL3xx/560 Gen11 High Performance Heatsink (P48905-B21. “Q” processors require Max Performance Heatsink (P48817-B21). Processors with TDP equal to or less than 150W require Standard Heatsink (P49145-B21). Liquid-cooled CPUs require Maximum Performance Heat Sink (P48817-B21). One heatsink covers both CPUs.

HPE ProLiant DL380 Gen11 CPU
Heatsink & Fans

The HPE DL380 Gen11 supports up to two 4th Generation Intel® Xeon® Scalable Processors, though processors ship without heatsinks or fan kits, which must be ordered separately. Processors with a TDP of 150W to 350W require the High Performance Heatsink (P48818-B21), or High-Performance LP HSK (P48905-B21) if paired with a mid-tray drive cage. "Q" processors and liquid-cooled CPUs require the Maximum Performance Heatsink (P48817-B21), while processors with a TDP of 150W or below use the Standard Heatsink (P49145-B21). Each heatsink covers both CPUs.

Cooling Options:
  • Standard HSK (P49145-B21)
  • High-Performance 2U HSK (P48818-B21)
  • High-Performance LP HSK (P48905-B21)
  • Max Performance HSK (P48817-B21)
  • 2U High Performance Fan Kit (P48820-B21)

HPE DL380 Gen 11 Heat Sink Standard HSK
(P49145-B21)
  • Required if CPUs has a TDP lower 150W
HPE DL380 Gen 11 Heat Sink High-Performance 2U HSK
(P48818-B21)
  • Required if CPUs has a TDP over 150W
HPE DL380 Gen 11 Heat Sink High-Performance LP HSK
(P48905-B21)
  • Required if mid-tray is selected.
HPE DL380 Gen 11 Heat Sink Max Performance HSK
(P48817-B21)
  • Required for “Q” series processors.
HPE DL380 GEn 11 Fan Cage

2U High Performance Fan Kit (P48820-B21)

  • Includes 6 High Performance fan
  • For all CPUs over 205W TDP
  • Memory with larger than 128GB capacity
  • Memory with 96GB Smart Kit or higher density
  • NVMe Bundle/ EDSFF Bundle is selected
  • If quantity 3 of front drive cage is selected
  • The 8, 12 LFF & 8 SFF CTO come with 4 standard fans
  • The 24 SFF CTO comes with 6 High-Performance fans
  • Some components will need this fan kit. Please read the manual for these requirements.
Liquid Cooling

There are two Liquid Cooling options for this server. If any are installed, you must also install the correct Tubes for the cooling system to work properly. Please keep in mind the PCIe slot amount. One of these LCs takes up a PCIe slot and is usually installed when a GPU is selected. Some GPUs are DW and take up two slots. Even with 8 PCIe slots you can run out of room fast.

Requires the DLC:
  • Intel Data Center GPU Max 1100 (S1T66C)
  • Intel Liquid Cooled Processors (Q)
  • Read Manual for more DLC requirments

Cold Plate Module NS204 Tube Kit (P62023-B21)
  • Includes 2 Cold Plate Modules & 1 Quick Disconnect Module
  • DLC 55cm Quick Disconnect Tube Set Kit (P62042-B21)
  • This DLC uses the NS204i-u slot for connections
  • The HPE NS204i-u Gen11 NVMe Boot Optimized Storage Device(P48183-B21) cannot be selected.
Cold Plate Module Kit from Primary PCIe (P62029-B21)
  • Includes 2 Cold Plate Modules & 1 Quick Disconnect Module.
  • DLC 55cm Quick Disconnect Tube kit P62042-B21)
  • This kit uses a PCIe slot on the Primary Riser.
  • If this option is selected the Primary Riser will have one less PCIe slot available for PCIe adapters. Please keep this in mind when considering the total number of PCIe adapters required.
Memory | 32x DDR5 4800MT/s DIMM

The HPE DL380 Gen11 Server supports a maximum of 32 DIMMs, offering 16 DIMM slots per processor with 8 memory channels per processor and 2 DIMMs per channel, enabling a total memory capacity of up to 8.0 TB. This configuration utilizes 32 x 256 GB RDIMMs operating at 4800 MT/s. The server supports the full 32 DIMMs with the 8SFF or 16SFF drive configurations, while the 24SFF configuration is limited to a maximum of 16 DIMMs. This design provides high-speed, scalable memory options, making the server well-suited for demanding workloads.


  • DIMM Blanks are optional and not required.
  • Mixing of 3DS memory and non-3DS memory is not supported
  • Mixing of x4 and x8 memory is not allowed
  • Mixing of DIMM types (UDIMM, RDIMM, and LRDIMM) is not supported.
  • If 96GB or higher density memory is selected then High Performance Fan Kit must be selected.
  • 96GB memory cannot be mixed with any other memory.
HPE DL380 Gen 11 Memory Options
Network Choice NC

In the HPE DL380 Gen11 Rack Server, NC stands for "Network Choice". This designation means the server does not come with a built-in network adapter (NIC), giving customers the flexibility to select and install their preferred network options, such as OCP 3.0 or stand-up NICs, based on their specific networking needs.

This system has 2 OCP ports. The OCP ports have enablement kits to provide x8 or x16 functionality to the slots. Please take a look at which controller you are trying to install and the slot diagram below to know which slot each controller should be installed in.

HPE DL380 Gen 11 Network Choice OCP 3.0
OCP Slot Location 1 OCP Storage Controller (OROC) + 1OCP NIC 1 OCP NIC 2 OCP NICs 1 OCP Storage Controller (OROC) 2 OCP Storage Controllers (OROC)
OCP 1 OROC N/A OCP NIC OROC (Higher priority) OROC (Higher priority)
OCP 2 (with shared NIC and WoL) OCP NIC NIC (higher priority) OCP NIC (higher priority) N/A OROC
Expansion Slots

The HPE DL380 Gen11 Rack Server comes with 8 PCIe slots designed for expansion and flexibility. These slots support PCIe Gen4, offering high bandwidth and low latency, which is ideal for data-intensive applications.

As a Network Choice (NC) server, the HPE DL380 Gen11 allows you to install PCIe cards or utilize the two available OCP (Open Compute Project) ports for networking. Using the OCP ports frees up PCIe slots for other expansion needs, maximizing configuration flexibility and optimizing available PCIe resources.


Rules & Limitations
  • NEBS (rugged) risers cannot be mixed with other non-NEBS risers.
  • The Primary Riser shipping default in the CTO server is a x8 FH/FL, x16 FH/FL, and x8 FH/HL
  • A second processor is required for the Secondary/Tertiary riser
  • x16 cards installed on x8 slots could observe sub-optimal performance.
  • When 2LFF Tertiary Cage is selected then Secondary and Tertiary Riser cannot be selected.
  • Please read the manual for more rules and limitations.
Riser Information
Part Number Description Riser Position Bus Width (Gen5 Lanes)
Primary Secondary Tertiary Top Slot Middle Slot Bottom Slot
N/A This is the default riser in the chassis D N N x8 x16 x8
P48803-B21 HPE DL380 Gen11 x16/x16/x16 Primary Riser Kit O N N x16 x16 x16 #1
P51083-B21 HPE DL380 Gen11 x16/x16/x16 Secondary Riser Kit N O N x16 x16 x16 #2
P48802-B21 HPE DL38X Gen11 x8/x16/x8 Sec Riser Kit N O N x8 x16 x8
P48804-B21 HPE DL38X Gen11 2x16 Tertiary Riser Kit N N O x16 x16 #3
P48805-B21 HPE ProLiant DL380 Gen11 2U Primary/Secondary NEBS-compliant Riser Kit O N N x8 x16 x8
P48806-B21 HPE ProLiant DL380 Gen11 2U Secondary/Tertiary NEBS-compliant Riser Kit N O N x8 x16 x8
Notes:
− D = Default on chassis; O = Optional; N = not supported or slot/connector not present.
− #1 Requires HPE DL380 Gen11 x16/x16/x16 Primary Cable Kit (P56073-B21)
− #2 Requires HPE DL380 Gen11 x16/x16/x16 Secondary Cable Kit (P56074-B21)
− #3 PCIe Gen4 lanes.
− x16 cards installed on x8 slots could observe sub-optimal performance.
GPU

System memory should be 2x of GPU memory. Most GPUs need an LC system installed so please take note of the PCIe slots used and which PCIe slot you install the GPU in. Some GPUs require certain parts or have limitations. To view all the rules for each GPU please view the item.

GPU Requirments
  • Maximum Performance fan kit (P48820-B21)
  • GPU Power Cable Kit (P56072-B21)

When configuring the HPE ProLiant DL380 Gen11 server with GPUs, it's crucial to consider cooling requirements to maintain optimal performance and system reliability. The server supports up to eight single-wide or three double-wide GPUs, depending on if the DLC is installed in the configuration.

HPE Dl380 Gen11 GPU DW
GPU Information
Part number Card QTY Support PCIe 8SFF 16SFF/8LFF 24SFF/12LFF
S1T66C Intel® Data Center GPU Max 1100 2 Gen5 2@35C(Air) 2@35C(Air)
if CPU ≤ 185W.
Not Supported
R9S41C NVIDIA H100 80GB PCIe Accelerator 2 or 3 Gen5 2@25C (Air)
3@20C (DLC)
2 @ 20C (Air)
2 @ 25C (DLC)
Not supported
S0K90C NVIDIA L40 48GB PCIe Accelerator 3 Gen4 3@25C(Air)
3@25C(DLC)
2@25C(Air)
3@25C(DLC)
1@25C(Air)
2@25C(DLC)
S0K89C NVIDIA L4 24GB PCIe Accelerator 8 Gen4 8 8@25C(Air)
8@25C(DLC)
5@25C(Air)
8@25C(DLC)
R9P49C NVIDIA A100 80GB PCIe Non-CEC Accelerator 3 Gen4 30C 25C Not supported
R8T26C NVIDIA A16 64GB PCIe Non-CEC Accelerator for HPE 3 Gen4 30C 25C Not supported
Storage Controllers | Tri-Mode SAS/SATA/NVMe

The HPE DL380 Gen11 Rack Server supports Tri-Mode controllers for mixed drive configurations. For direct-attached drives without a controller, VROC can be enabled. There are two VROC versions, one of which supports only NVMe SSDs.


Intel VROC SATA for HPE ProLiant Gen11

All models feature an embedded storage controller, with embedded software SATA RAID support for up to 14 bays.

  • RAID Support- 0/1/5/10.
  • Utilizing Intel CPU to RAID or HBA direct connected drives
  • Off by default and must be enabled.
  • Read the manual below for more.
Intel VROC NVMe for HPE ProLiant Gen11

All models feature 4 x8 PCIe 5.0 connectors per socket for NVMe connectivity, provides support for up to 8 direct attach x4 NVMe bays.

  • Only supported on SFF models
  • NVMe SSDs connected directly to the CPU
  • For NVMe SSDs only, no PCIe card support.
  • Utilizing Intel CPU to RAID or HBA direct connected drives
  • Standard for RAID 0/1/10 (S0E37A/S0E38AAE)
  • Premium for RAID 0/1/5/10 (R7J57A/R7J59AAE)
  • Read the manual below for more.

If a controller with cache is installed, you must also add either the HPE Smart Storage Hybrid Capacitor (P02377-B21) or the HPE 96W Smart Storage Lithium-ion Battery (P01366-B21), both with a 145mm cable kit.

HPE DL380 Gen 11 Storage controller
  • HPE SR Gen11 Controllers

    HPE SR Gen11 Controllers

  • HPE MR Gen11 Controllers

    HPE MR Gen11 Controllers

  • HPE VROC Controllers

    HPE VROC Controllers User Guide

Integrated Lights-Out 6 (iLO 6)

Software that enables you to securely configure, monitor, and update your HPE ProLiant Gen11 servers seamlessly, from anywhere.

Embedded in Hewlett Packard Enterprise servers, HPE Integrated Lights-Out 6 (iLO 6) is an exclusive core intelligence that monitors server status, providing the means for reporting, ongoing management, service alerting, and local or remote management to identify and resolve issues quickly.


What is different in iLO6
  • SPDM support for increased security with storage and network cards
  • Telemetry streaming using Redfish Event subscription.
  • Redfish APIs for iLO, System TPM measurement and SPDM capable option cards measurements.
  • Added capability in iLO for Two Factor Authentication using OTP (One Time Password) for Microsoft AD users
  • PLDM Downstream Firmware Update
  • Certificate Management Enhancements
  • Automatic certificate Enrollment via SCEP
  • Certificate sideloading
  • Redfish consistent health roll-ups
  • Automatic clearing of Redfish alerts when condition doesnotdoes not exist anymore.
  • Telemetry streaming using Redfish Event subscription.
  • Redfish APIs for iLO, System TPM measurement and SPDM capable option cards measurements.
  • Added capability in iLO for Two Factor Authentication using OTP (One Time Password) for Microsoft AD users

What’s deprecated in iLO 6
  • Java IRC
  • Internet Explorer
  • eRSDirect Connect
  • Jitter Smoothing
Power

Select a minimum (1), or maximum (2) power supplies. The mixing of 2 different power supplies is NOT allowed.

HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen11 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.

HPE DL380 Gen11 Power Supply Unit
Dimensions & Weight:
LFF CTO servers:

8.75 x 44.8 x 73.25 cm / 3.44 x 17.64 x 28.84 in

12 LFF hard drives (no rear drives), 2x processors, 2x power supplies, 1x RAID controller, 2x Risers installed)

  • Maximum: 37kg/81.57 lbs
  • Minimum: 18kg/39.68 lbs

SFF CTO servers:

8.75 x 44.8 x 72.7. cm / 3.44 x 17.64 x 28.62 in

8 SFF hard drives (no rear drives), 2x processors, 2x power supplies, 1x RAID controller, 2x Risers installed)

  • Maximum: 33kg/72.75 lbs
  • Minimum: 16kg/35.27 lbs
 

Current Configuration

Select Chassis

Select Processor

Heat sinks / Fans / Cooling Modules

Memory

Storage Devices (Optional)

Storage Batteries & Cables (Optional)

Drive cage and backplane (Optional)

Small Form Factor SAS Drives HDD/SSD (Optional)

Small Form Factor SATA Drives HDD/SSD (Optional)

Small Form Factor NVMe Drives (Optional)

OS BOOT Device (Optional)

Riser Card (Optional)

OCP Enablement (Optional)

OCP cards (Optional)

Networking PCI (Optional)

Infini Band PCI/OCP (Optional)

Fibre Channel HBA (Optional)

GPU (Optional)

Security (Optional)

Rail Kit (Optional)

Power Cooling

ECS Warranty

*list also serves as quick links to each section

Welcome to the Request Express Quoting Form!

for: HPE ProLiant DL380 Gen11 24SFF NC CTO Server


This streamlined form is designed to simplify the quoting process for you. Whether you're uncertain about specific parts or seeking a hassle-free experience, you're in the right place.

Provide us with the necessary details, and we'll generate a customized quote for your server. Even if you're unsure about the exact components you need, we've got you covered. Our team will tailor a solution based on the information you provide.

Let's get started!
Simply fill out the form, and we'll take care of the rest.


Name *
Email *
Message *
Preferred Brand
Form Factor
Rack Unit of Height (#U)
Processor(s)
Memory
Total Amount of Memory
Total Amount of Usable Storage

Storage Type


RAID

List Networking Connection needed:
Rack Space Restrictions
Which OS do you plan on using:


Price as Configured: 0

Add to Cart

Error Submitting Cart. Please get in touch with us for support.

Please select all the mandatory items in the configuration list before submitting the cart.

One or more items in your cart has no price. This will be submitted as a "Request for a Quote".

Product Specs

Base Standard Capabilities

Technical specificationsHPE ProLiant DL380 Gen11
Processor type ®Intel
Processor family4th Generation Intel® Xeon® Scalable Processors
Processor number1 or 2
Processor core available16 to 60 core, depending on processor
Processor cache22.5 MB to 112.5 MB L3, depending on processor
Processor speed3.1 GHz maximum, depending on processor
Power supplytype 800W, 1000W, or 1600W Dual hot-plug redundant 1+1 HPE Flexible Slot Power Supplies, depending on model
Expansion slotsUp to 8 PCIe Gen5, and 2 OCP 3.0, for detailed descriptions reference the QuickSpecs
Maximum memory8 TB with 256 GB DDR5
Memory slots32
Memory typeHPE DDR5 Smart Memory
Memory protection featuresRAS – Advanced ECC, online spare, mirroring, combined channel (lockstep) functionality, and HPE Fast
Fault Tolerant Memory (ADDDC)
Intel Optane Persistent Memory
Optical drive typeOptional DVD-ROM Optional via Universal Media Bay External support only
System fan featuresHot-plug redundant fans, Standard Fan Kit or High Performance Fan Kit, depending on model
Network controller1 Gb, 10 Gb, 10/25 Gb, 100 Gb, or 200 Gb, in PCIe adapter or OCP 3.0 form factor, for detailed descriptions reference the QuickSpecs
Storage controllerHPE SR932i-p and/or HPE MR216i-o and/or HPE MR416i-o and/or HPE MR216i-p and/or HPE MR416i-p and/or HPE MR408i-o, for detailed descriptions reference the QuickSpecs
DIMM capacity16 GB to 256 GB
Infrastructure managementHPE iLO Standard with intelligent provisioning (embedded), HPE OneView Standard (requires download) (standard) HPE iLO Advanced, HPE OneView Advanced (optional, requires licenses), and HPE GreenLake COM
Drive supported8 or 12 LFF SAS/SATA/SSD 8, 16, or 24 SFF SAS/SATA/SSD, depending on configuration. 6 SFF rear drive optional or or 2 SFF rear-drive optional, 20 SFF NVMe optional, NVMe support via Express Bay will limit maximum drive capacity, depending on model.

Technical Specs

DL380 CTO Model P52532-B21
Networking Choice CTO Server Models HPE ProLiant DL380 Gen11 8LFF NC CTO Server
SKU Number P52532-B21
TAA SKU* P52532-B21#GTA
HPE Trusted Supply Chain P36394-B21 – Optional
Processor Not included as standard
DIMM Slots 32-DIMM slots
Storage Controller Embedded SW RAID with 14 SATA ports (12-ports accessible), optional choice of HPE modular MegaRAID controller.
PCIe Three standard in primary riser
Drive Cage - available 8 LFF
Network Controller Choice of either OCP 3.0 or select stand-up network adapters for primary networking selection plus additional/optional stand-up network adapters.
Notes: No embedded networking
Fans 4-Standard
Management HPE iLO with Intelligent
USB 4x 3.0 standard plus iLO front service port

Shipping Information

Express Computer Systems can ship to virtually any address in the world and provides you with the best shipping rates possible. Cost of shipping varies depending on what service you require, your destination and size of the shipment. Shipping costs will be calculated separately from your order and billed to you post purchase. In the notes section of your order please provide us with your preferred shipping method and we will get back to you.

Custom configured orders ship within 2 business days after all required products are in stock.

Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine, California.

Domestic Shipments
  • Standard Ground
    • Shipping time: 2-7 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-10 business days
    • Excludes weekends, holidays or weather delays.
  • 3 Business Days
    • Shipping time: 3 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 3-6 business days
    • Excludes weekends, holidays or weather delays.
  • 2 Business Days
    • Shipping time: 2 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-5 business days
    • Excludes weekends, holidays or weather delays.
  • Overnight / Next Business Day
    • Shipping time: 1 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 1-4 business days
    • Excludes weekends, holidays or weather delays.
International Shipments
  • International Economy
    • Shipping time: 4-6 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 5-9 business days
    • Excludes weekends, holidays or weather delays.
  • International Priority
    • Shipping time: 1-3 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-6 business days
    • Excludes weekends, holidays or weather delays.

For more information on shipping view our Shipping Information page or send us a message

ECS Warranty Information

Express Computer Systems (ECS) provides a 1 year parts warranty against defects in material or workmanship that will affect the products functionality. All refurbished items are tested prior to shipping to guarantee up-time upon arrival. If you are having issues with an item we provided please Contact Us and we will do our best to assist you.

What does our ECS warranty cover?
We offer 1 year warranty as standard and additional years can be added to fit your needs. Please reach out to a sales associate via the Contact Us page or live chat for more information on extended coverage options. During the coverage period if your product fails we will offer a Next Business Day replacement. If we are unable to replace the product we will refund its original selling price. Shipping costs and tax are not refundable. Express Computer Systems retains the right to decide whether the goods will be replaced or refunded.

What is not covered by our warranty?
Our warranty does not cover any problem caused by the following conditions:

  1. accidents; misuse; carelessness; electrostatic discharge; shock; temperature or humidity beyond the specifications of the product; improper installation; operation; modification;
  2. any improper use that contravenes the instructions in the user manual;
  3. problems caused by other equipment. Our warranty is void if the product is returned with damaged, removed, counterfeit labels, or any modifications (including any component or external cover removal). Our warranties do not cover data loss or damages to any other equipment. In addition, our warranties do not cover incidental damages, consequential damages, or costs related to data recovery, removal, and installation.

Important notes:

  • Please ask for additional warranty/coverage that you may require in addition to the standard 1 ECS warranty prior to final purchase. Requesting additional warranty after your purchase can be denied.
  • FREE technical support is provided on purchased items via phone, email, or live chat.

About Express Computer Systems

Express Computer Systems is committed to transforming our customers’ IT infrastructure with high quality products at affordable costs. Our sales reps and customer support engineers understand our customers rely heavily on advanced technology to run their business but need to do so without breaking the bank.

We specialize in building custom server configurations, custom storage solutions, networking solutions, and components from top manufacturers including HPE, Dell, Cisco, NetApp, Dell EMC, HPE Nimble and many others.

Subscribe