Please remove $0 item(s) from cart - or - Request for Quote

HPE ProLiant ML110 Gen9 CTO Tower Server

Brand:
Type:
CTO Servers
Condition:
ECS Refurbished & Tested
-PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
-SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.

Multi-Quantity Discounts Available for ALL Line Items

** LARGE DISCOUNTS available for complete systems. Pricing displayed is for single item purchases **

Use the configuration tool to create your solution and submit it us for a quote OR send us a message with your complete build requirements to receive best pricing

READ ME

  • Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
  • “Submit for Quote” items can be added to your cart and sent to us via the cart page
  • Click the blue bar to close/open a section from view after choosing your options

Server Chassis

Processors

Supports (1) processor

Intel Xeon E5-2600v3 2133mhz

Supports (1) processor

Intel Xeon E5-2600v4 2400mhz

Supports (1) processor

HPE Memory (Optional)

Supports up to 8 DIMMs

HPE Memory (Optional)

Supports up to 8 DIMMs

Extra Drive Options (Optional)

LFF and SFF can not be mixed.

HDD Non-Hot-Plug (3.5") LFF (Optional)

Supports up to (4) LFF Drives

HPE Hot-Plug Drives SAS (3.5") LFF (Optional)

Supports up to (4) LFF Drives per Cage

HPE Hot-Plug Drives SATA (3.5") LFF (Optional)

Supports up to (4) LFF Drives per Cage

HPE Hot-Plug Drives SAS (2.5") SFF (Optional)

Supports up to (8) SFF Drives per Cage

HPE Hot-Plug Drives SATA (2.5") SFF (Optional)

Supports up to (8) SFF Drives per Cage

PCI Fan (Optional)

If you intend to install a storage controller, GPU card or any expansion boards in the PCIe slot area except the dedicated iLO module, a PCI fan and baffle option is required to provide proper cooling of the PCIe slot area.
When any 140W processor kit or SAS SSD is selected, then this option kit must be ordered.

Networking Adapters (Optional)

NOTE: If any PCIe card is selected, then this PCI Fan kit (784580-B21) must be selected. This option kit cannot be selected if no PCIe card is ordered.

Storage Controller (Optional)

NOTE: If any PCIe card is selected, then this PCI Fan kit (784580-B21) must be selected. This option kit cannot be selected if no PCIe card is ordered.

GPU (Optional)

The server supports M2000, K2200, and K4200 GPU cards. Install the GPU card into PCIe slot 1.
K4200 (secure the captive screw of the supporting holder to the system board) . Before installing this one. You have to remove the system board mounting screw and use it on the GPU card holder. Please view the Tech Manual below for more details.
NOTE: If any PCIe card is selected, then this PCI Fan kit (784580-B21) must be selected. This option kit cannot be selected if no PCIe card is ordered.

Optical Drives (Optional)

Supports only 1

USB Devices and SD Cards (Optional)

Intergrated Lights-Out (iLO) (Optional)

iLO Management (standard), Intelligent Provisioning (standard)
At the top of this list there is the iLO dedicated PCI port kit. This goes to the PCI slot 6 which is dedicated just for this kit.

Trusted Platform Module (TPM) (Optional)

Power Supply Unit (PSU)

The 350W is the Standard PSU
If you choose the 750W (up to 2) You have to choose the RPS Enablement Kit.

ECS Warranty

Helpful Tip: Once desired configuration is selected click "Add to Cart". From the cart page you can submit a submit a quote request for best pricing

What's New for ML110 Gen9
  • (1) Intel Xeon E5-2600v4
  • (8) 2133 MT/s HPE DDR4 RDIMM | Max 256GB
  • (5) PCIe3 expansion slots
  • (16) SFF Drives
  • Default HPE Dynamic Smart Array B140i
  • Broadcom 5717 Dual-port 1GbE
  • HPE iLO (Firmware HPE iLO4 2.0 or later) with NAND
  • GPU Supported

The refurbished HPE ProLiant ML110 Gen10 server is an enhanced single processor tower with performance, expansion, and security at an affordable price. It supports the Intel Xeon Scalable processor, HPE DDR4 SmartMemory with a maximum capacity of 192 GB, five PCIe slots, eight large form factor (LFF) or 16 small form factor (SFF) disk drives. It can easily be converted to a rack using 4.5U of rack space.

Ideal for:

  • Cloud Servers
  • Corporate IT
  • Data Analytics
  • Database
  • Edge Servers
  • Hyper-Converged infrastructure (HCI)
  • Retail Servers
  • Virtual Desktop Interface (VDI)
  • Web Tech

CTO Configuration Support

Need help with the configuration? Contact us today!

Chassis Options

The ML110 Gen HPE Tower Server has 3 Different Chassis options.

[Chassis] HP ProLiant ML110 Gen9 Non-hot Plug 4LFF Configure-to-order Server HP ProLiant ML110 Gen9 Hot Plug 4LFF Configure-to-order Server HP ProLiant ML110 Gen9 Hot Plug 8SFF Configure-to-order Server
SKU Number 776933-B21 776934-B21 776935-B21
Processor 1 1 1
DIMM Slots 8 DIMM slots for RDIMM, LRDIMM DDR4 Memory
Storage Controller HPE Dynamic Smart Array B140i
PCIe 5 PCIe 3.0 Slots
Drive Cage 4LFF Non Hot Plug 4LFF Hot Plug 8SFF Hot Plug
Network Controller Broadcom 5717 Dual-port 1GbE
Fans 1 non hot plug, non-redundant
Management iLO Management (standard), Intelligent Provisioning (standard), HPE OneView (standard)
USB 2 front, 2 internal, 4 rear
Maximum Internal Storage
  • Non Hot Plug LFF SATA 16TB 4x4TB
  • Hot Plug LFF SAS 96TB 8x12TB
  • Hot Plug LFF SATA 96TB 8x12TB
  • Hot Plug LFF SATA SSD 15.36TB 8x1.92TB
  • Hot Plug SFF SAS 32TB 16x2TB
  • Hot Plug SFF SATA 32TB 16x2TB
  • Hot Plug SFF SAS SSD 6.4TB 16x400GB
  • Hot Plug SFF SATA SSD 30.72TB 16x1.92TB

Drive Upgrades
  • No Non-Hot Plug Drive Upgrades
  • HP ML110 Gen9 4LFF Hot Plug Drive Cage Kit 784584-B21
  • HP ML110 Gen9 8SFF Hot Plug Drive Cage Kit 784586-B21

Mixing drive cages is not supported.

GPU
Are you going to install GPU Accelerators at all?

Well this ML110 HPE Tower Server supports up to 1 of these three models on PCI-e Slot 1. The following models are allowed in this server.

  • HPE NVIDIA Quadro M2000 SW 4GB Graphics Accelerator - P8Y48A - 855180-001
  • HPE NVIDIA Quadro K2200 SW 4GB Graphics Accelerator - J0G89A - 765148-002
  • HPE NVIDIA Quadro K4200 Graphics Accelerator - J0G90A - 783875-001
    • Needs HP ML110 Gen9 GPU Supporting Holder Kit (791711-001)
Lets Talk Cooling!
PCI Fan and Baffle Kit (784580-B21)

To ensure proper cooling for your GPU or PCI cards, you'll need the HP ML110 Gen9 PCI Fan and Baffle Kit (784580-B21). This kit includes the PCI Fan Module (791710-001) and the PCI Air Baffle (791709-001). Both components are necessary to maintain adequate airflow and prevent overheating when installing PCI cards, adapters, or GPUs. Proper installation of this kit ensures optimal cooling for your system's performance and reliability.

HPE ML110 Gen 9 PCI Fan Upgrade

Rear Fan Kit 92x38mm (791717-001)

The system fan module (92x32 mm - 791708-001) can be upgraded to the enhanced fan module (92x38 mm - 791717-001) for improved cooling performance. This upgraded fan module is mandatory when installing a 140W processor kit or selecting SAS SSDs. In these cases, the upgraded fan module kit must be ordered to ensure proper cooling and system reliability.

HPE ML110 Gen 9 Fan Upgrade
Storage Controllers
Default B140i Controller

The base storage controller for the HPE ML110 Gen9 is the HPE Dynamic Smart Array B140i Controller, which supports only SATA drives. For more advanced configurations, you can install a SAS controller with Flash Backed Write Cache (FBWC), enabling support for 2 or 4 12Gb SAS Ports. Note that specific controllers must be selected based on the drive cage configuration, and appropriate cable kits are required for compatibility.

Additionally, for full FBWC support, the Smart Storage Battery (727258-B21) and its holder (786710-B21) must be installed, as these items are not included by default in CTO configurations featuring SAS controllers. Ensure these components are properly selected and installed to maintain optimal performance and functionality.


Lets talk power!
Non-Hot Plug

The HPE 350W ATX Gen9 Power Supply Kit (776442-B21) is the standard non-hot-plug PSU installed in the HPE ML110 Gen9 Tower Server. For configurations requiring more power, such as those with GPUs or additional PCI adapters, it can be upgraded to the 550W ATX Gen9 Non-Hot-Plug PSU (776444-B21).

Hot-Plug

For hot-plug capability, the server supports one or two 750W Common Slot Gold Hot-Plug Power Supply Kits (512327-B21). Installing these requires the HPE ML110 Gen9 Redundant Power Supply Enablement Kit (784582-B21), which includes the PSU cage, backplane, and top bracket (791712-001). If only one redundant PSU is installed, the second slot must be filled with the PSU Blank (698883-001) to maintain proper airflow and system stability.

Lights Out! iLO

The onboard NIC 1/shared iLO connector is set as the default system iLO connector. To enable the dedicated iLO management module, use the iLO 4 configuration Utility accessible within the HPE UEFI System Utilities. All of the following Chassis come with

  • iLO Management (standard)
  • Intelligent Provisioning (standard)
  • HPE OneView (standard)
Dedicated iLO Port

PCI-e x1 Slot 6 is dedicated only for the 1GbE HPE ML Gen9 Dedicated iLO Port Kit (792354-001).

 

Current Configuration

Server Chassis

Processors

HPE Memory (Optional)

HPE Memory (Optional)

Extra Drive Options (Optional)

HDD Non-Hot-Plug (3.5") LFF (Optional)

HPE Hot-Plug Drives SAS (3.5") LFF (Optional)

HPE Hot-Plug Drives SATA (3.5") LFF (Optional)

HPE Hot-Plug Drives SAS (2.5") SFF (Optional)

HPE Hot-Plug Drives SATA (2.5") SFF (Optional)

PCI Fan (Optional)

Networking Adapters (Optional)

Storage Controller (Optional)

GPU (Optional)

Optical Drives (Optional)

USB Devices and SD Cards (Optional)

Intergrated Lights-Out (iLO) (Optional)

Trusted Platform Module (TPM) (Optional)

Power Supply Unit (PSU)

ECS Warranty

*list also serves as quick links to each section

Welcome to the Request Express Quoting Form!

for: HPE ProLiant ML110 Gen9 CTO Tower Server


This streamlined form is designed to simplify the quoting process for you. Whether you're uncertain about specific parts or seeking a hassle-free experience, you're in the right place.

Provide us with the necessary details, and we'll generate a customized quote for your server. Even if you're unsure about the exact components you need, we've got you covered. Our team will tailor a solution based on the information you provide.

Let's get started!
Simply fill out the form, and we'll take care of the rest.


Name *
Email *
Message *
Preferred Brand
Form Factor
Rack Unit of Height (#U)
Processor(s)
Memory
Total Amount of Memory
Total Amount of Usable Storage

Storage Type


RAID

List Networking Connection needed:
Rack Space Restrictions
Which OS do you plan on using:


Price as Configured: 0

Add to Cart

Error Submitting Cart. Please get in touch with us for support.

Please select all the mandatory items in the configuration list before submitting the cart.

One or more items in your cart has no price. This will be submitted as a "Request for a Quote".

Product Specs

Base Standard Capabilities

Product features

Feature
Description
Processor (One of the following depending on Model)
Model
CPU frequency
Cores
L3 Cache
Power
QPI
DDR4 Hz
E5-1650v3
3.5 GHz
6
15MB
140 W
0.0 GT/s
2133
E5-1603v3
2.8 GHz
4
10MB
140 W
0.0 GT/s
1866
E5-1620v3
3.5 GHz
4
10MB
140 W
0.0 GT/s
2133
E5-2660v4
2.0 GHz
14
35MB
105 W
9.6 GT/s
2400
E5-2640v4
2.4 GHz
10
25MB
90 W
8.0 GT/s
2133
E5-2630Lv4
1.8 GHz
10
25MB
55 W
8.0 GT/s
2133
E5-2623v4
2.6 GHz
4
10MB
85 W
8.0 GT/s
2133
E5-2620v4
2.1 GHz
8
20MB
85 W
8.0 GT/s
2133
E5-2609v4
1.7 GHz
8
20MB
85 W
6.4 GT/s
1866
E5-2603v4
1.7 GHz
6
15MB
85 W
6.4 GT/s
1866
E5-1680v4
3.4 GHz
8
20MB
140 W
9.6 GT/s
2400
E5-1660v4
3.2 GHz
8
20MB
140 W
9.6 GT/s
2400
E5-1620v4
3.5 GHz
4
10MB
140 W
0.0 GT/s
2400
E5-1607v4
3.1 GHz
4
10MB
140 W
0.0 GT/s
2400
E5-1603v4
2.8 GHz
4
10MB
140 W
0.0 GT/s
2400
Chipset (One of the following depending on model)
  • Intel C610 series chipset

  • Intel E5-2600v4 processor family

  • Intel E5-2600v3 processor family

  • Intel E5-1600v4 processor

  • Intel E5-1600v3 processor family

NOTE: This is a 140 W processor which need to be ordered with the ML110 Gen9 System fan upgrade kit - 789654-B21
Server Unified Extensible Firmware Interface (UEFI)/Legacy ROM
UEFI is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with users server at boot time
  • Secure Boot

  • Operating system specific functionality

  • Support for > 2.2TB (Using GPT) boot drives

  • USB 3.0 stack

  • Embedded UEFI shell

  • Mass configuration deployment tool using RESTful API for iLO 4

  • PXE boot support for IPv6 networks

  • Boot support for option cards that only support a UEFI option ROM

  • Network stack configurations

NOTE:
  • For UEFI boot mode, boot environment and OS image installations should be configured properly to support UEFI

  • UEFI FIO setting (758959-B22) can be selected to configure the system in legacy mode in the factory for users HPE ProLiant Gen9 Server

Cache memory
  • 10MB (1 x 10MB) Level 3 cache1

  • 15MB (1 x 15MB) Level 3 cache2

  • 20MB (1 x 20MB) Level 3 cache3

  • 25MB (1 x 25MB) Level 3 cache4

  • 30MB (1 x 30MB) Level 3 cache4

  • 35MB (1 x 35MB) Level 3 cache5

NOTE:
  • 1. Four-core processors

  • 2. Six-core processors

  • 3. Eight-core processors

  • 4. Ten-core processors

  • 5. Fourteen-core processors

On system management chipset
HPE iLO (Firmware HPE iLO4 2.0 or later) with NAND
Memory
Type: HPE Smart Memory and Standard Memory
HPE SmartMemory DDR4 Registered (RDIMM) or Load Reduced (LRDIMM)
DIMM slots available
8 (8 DIMM slots per processor, 4 channels per processor, 2 DIMMs per channel)
Maximum capacity (LRDIMM)
128GB(8 x 16GB LRDIMM - 2133 MHz)
Maximum capacity (RDIMM)
256GB (8 x 32GB RDIMM - 2133 MHz)
NOTE: This server does not support mixing LRDIMMs and RDIMMs. Attempting to mix any combination of these DIMMs can cause the server to halt during BIOS installation.
Memory protection
Advanced ECC
Online spare
Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip
Memory online spare mode detects a rank that is degrading and switches operation to the spare rank
Storage controller (One of the following depending on model)
Entry models
HPE Dynamic Smart Array B140i Controller
Base models
HPE Dynamic Smart Array B140i Controller
NOTE: B140i can't mix with any standup internal controller
Network controller
Broadcom 5717C0 Dual-port 1GB
Internal storage devices (One of the following depending on model)
Optical Drive
  • Optional SATA 9.5 mm DVD-ROM optical drive

  • Optional SATA 9.5 mm DVD RW optical drive

Hard Drives
  • None ship standard

Hard Drive Bays
  • Up to 4 Non-hot plug SATA 3.5 in drives

  • 4 Hot plug LFF SAS/SATA HDD bays; upgradable to 8

  • 8 Hot plug SFF SAS/SATA HDD bays; upgradable to 16

NOTE:
  • Mixing drive cage types is not allowed

  • The 4LFF configurations includes 3 blanks and 8SFF includes 7 blanks. Additional hard drive blanks can be ordered using either P/N666986-B21 for the HPE LFF HDD blank kit or P/N 666987-B21 for the HPE SFF HDD blank kit

  • NHPE SATA is limited to B140i controller

  • 16SFF is limited to P840 controller

Maximum internal storage (One of the following depending on model)
Drives
Capacity
Configuration
Hot Plug LFF SAS
80TB
8 x 10TB
Hot Plug LFF SATA
80TB
8 x 10TB
Hot Plug SFF SAS
32TB
16 x 2TB
Hot Plug SFF SATA
32TB
16 x 2TB
Non-Hot Plug LFF SATA
16TB
4 x 4TB
Hot Plug LFF SATA SSD
15.36TB
8 x 1.92TB
Hot Plug SFF SAS SSD
6.4TB
16 x 400GB
Hot Plug SFF SATA SSD
30.72TB
16 x 1.92TB
Power supply
  • HPE 350 W ATX-Gen9 power supply FIO kit

  • HPE 550 W ATX-Gen9 power supply kit

  • HPE 750 W CS gold hot plug power supply kit

More Specs

Expansion slots
Expansion Slots #
Technology
Bus Width
Connector Width
Bus Number
Form Factor
Notes
5
PCIe 3.0
x8
x8
-
Full-height, half length slot
For Processor 1
4
PCIe 3.0
x4
x4
-
Full-height, half length slot
For Processor 1
3
PCIe 3.0
x8
x8
-
Full-height, half length slot
For Processor 1
2
PCIe 3.0
x4
x4
-
Full-height, half length slot
For Processor 1
1
PCIe 3.0
x16
x16
-
Full-height, ¾ length (up to 9.5 in) slot
For Processor 1
6
HPE ML Gen9 Dedicated iLO port kit
-
x1
-
Dedicate for ML series
-
NOTE:
  • Bus number - Default bus assignment (In decimal). Inserting cards with PCI bridges may alter the actual bus assignment number

  • Five total expansion PCIe 3.0 slots. One PCIe 3.0 x16 (x16 speed); Two PCIe 3.0 x 8 (x8 speed); Two PCIe 3.0 x 4 (x4 speed)

System fans (One of the following depending on model)
Model
Non-redundant
Redundant
1P model
2 fans
N/A
Interfaces
Video
1 (Rear)
Network RJ-45 (Ethernet)
2
HP iLO remote management network port
1 GbE optional port
Micro SD slot
1 (Internal)
USB 3.0
5 (2 Rear, 1 internal, 2 front)
USB 2.0
3 (2 Rear, 1 internal)
Upgradeability (One of the following depending on model)
  • Up to 16 SFF hard drive bays, Or 8 LFF hard drive bays

  • Up to 8 DIMM slots

  • Redundant power supply

  • Optional optical drive (Up to 1)

Industry standard compliance
  • ACPI 2.0b compliant

  • PCIe 3.0 compliant

  • PXE support

  • WOL support

  • Novell certified

  • Microsoft logo certifications

  • IPMI 2.0, SMASH CLP, DCMI 1.0 compliant

  • SMBIOS 2.7.1

  • USB 3.0 support

  • ASHRAE A3

Graphics
  • 16 bit color: Maximum resolution of 1600 x 1200

  • Integrated matrox G200 video standard

  • 32bit color: maximum resolution of 1280 x 1024
    • 16MB flash

    • 128MB DDR3

Security
  • Power-on password

  • Setup password

  • Serial interface control

  • Power switch security

  • Administrator's password

  • TPM 1.2

  • TPM 2.0

  • UEFI

Form factor
Tower (4.5 U)
Server utilities
  • Smart update

  • HPE Systems Insight Manager(HPE SIM)

  • Scripting toolkit and windows Power Shell

  • RESTful interface tool

  • HPE iLO mobile application

  • HPE Insight online

Embedded management
  • HPE Integrated Lights-Out (HPE iLO)

  • UEFI

  • RESTful API

  • Intelligent provisioning

  • Embedded remote support

Server management
HPE Insight Control, lets user deploy, migrate, monitor, remote control, and optimize users IT infrastructure through a single, simple management console. For more information Click here to access the "Insight Control" .
Education services
Keep users IT staff trained making sure they have the right skills to deliver on users business outcomes
Support services
  • HPE Technology Services delivers confidence, reduces risk and helps users realize agility and stability. Connect to Hewlett Packard Enterprise to help prevent problems and solve issues faster

  • HPE Support Services enable user to choose the right service level, length of coverage and response time as user purchase users new server, giving user full entitlement to the support for need for users IT and business

top

More Specs

Software overview

Feature
Description
Operating systems and virtualization software support
  • Microsoft Windows Server

  • Red Hat Enterprise Linux (RHEL)

  • SUSE Linux Enterprise Server (SLES)

  • VMware

  • ClearOS

Storage software
Whether user need to solve a specific data protection, archiving, or storage command and control challenge, or deliver on strategic consolidation, compliance, or continuity initiatives, look no further than Hewlett Packard Enterprise storage software
  • Data Protection and Recovery Software

  • Data Archive and Migration Software

  • Storage Resource Management Software (SRM)

  • Data Replication Software

  • Storage Device Management Software

  • HPE StoreVirtual VSA

top

Physical specifications

Specification
Description
Tower dimensions (H x W x D)
44 x 19.5 x 48.05 cm (17.32 x 7.68 x 18.92 in)
Tower weight (Approximate)
  • Maximum: 24.9 kg (55 lb)

  • Minimum: 12.5 kg (27.56 lb)

top

Technical specifications

HPE Dynamic Smart Array B140i Controller
Number of PCI links
Four
PCI link rate
4 Gb/s
Storage protocol support
SATA
SAS/SATA peak data transfer rate
6 Gb/s
Number of SAS/SATA links
10 links
SAS/SATA connectivity
2 x 4 connectors; 2 x 1 connectors
Expander support
No
Drives supported (Max)
Up to 10 internal drives
RAID support
0, 1, 10, 5 SATA
Software management
HPE SSA, SMH, SIM
Warranty
Server warranty
HPE Secure Encryption license
Not supported
HPE Smart Cache license
Not supported
HPE Smart storage administrator
Supported
HPE Ethernet 1Gb2-port 330i Adapter
Network interface
10Base-T/100Base-TX/1000Base-TX
Data transfer method
PCI express, two lanes (x2)
Controller
BCM5717
Connector
RJ-45
Compatibility
  • IEEE 802.3 10Base-T

  • IEEE 802.3ab 1000Base-T

  • IEEE 802.3u 100Base-TX

Network transfer rate
  • 10Base-T (Half-Duplex) - 10 Mb/s per port, 40 Mb/s combined

  • 10Base-T (Full-Duplex) - 20 Mb/s per port, 80 Mb/s combined

  • 100Base-TX (Half-Duplex) - 100 Mb/s per port, 400 Mb/s combined

  • 100Base-TX (Full-Duplex) - 200 Mb/s per port, 800 Mb/s combined

  • 1000Base-TX(Half-Duplex) - 1000 Mb/s per port, 4000 Mb/s combined

  • 1000Base-TX(Full-Duplex) - 2000 Mb/s per port, 8000 Mb/s combined

Cable support
10 Base-T: Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000 Base-TX: Category 5 or higher UTP; up to 328 ft (100 m)

top

Electrical specifications

Specification
Description
Rated line voltage
100 to 240 V ac
Rated input current
For 350 and 550 W power supply: 8 A (At 100~240 V ac)
Rated input frequency
50 to 60 Hz
Rated input power
  • 550 W power supply:

    • < 639 W (At 100 V ac)

    • < 605 W (At 200 V ac)

  • 350 W power supply:

    • < 427 W (At 100 V ac)

    • < 427 W (At 200 V ac)

BTU rating
  • 550 W power supply:

    • 2204 BTU/hr (At 100 V ac)

    • 2113 BTU/hr (At 200 V ac)

  • 350 W power supply:

    • 1452 BTU/hr (At 100 V ac)

    • 1544 BTU/hr (At 200 V ac)

Rated steady - state power
For 550 W Power Supply:
  • 550 W (At 100 V ac)

  • 550 W (At 200 V ac)

Maximum peak power
For 350 W Power Supply:
  • 350 W (At 100 V ac)

  • 350 W (At 200 V ac)

top

Environmental specifications

Specification
Description
Operating temperature
10° to 35°C (50° to 95°F)
Extended ambient operating support
Minimum: 5° to 10°C (41° to 50°F)
Maximum: 35° to 40°C (95° to 104°F)
Non-operating temperature
-30° to 60°C (-22° to 140°F)
Operating relative humidity
8% to 90% non-condensing
Non-operating relative humidity
5% to 95% non-condensing
Operating altitude
3048 m (10,000 ft)
Non-operating altitude
9144 m (30,000 ft)
Acoustics noise
Idle
L WAd
  • 3.6 Bels (LFF non hot-plug base)

  • 3.6 Bels (LFF hot-plug base)

  • 4.1 Bels (LFF hot-plug performance)

L pAm
  • 21 dBA (LFF Non hot-plug base)

  • 21 dBA (LFF Hot-plug base)

  • 27 dBA (LFF Hot-plug performance)

Operating
L WAd
  • 3.6 Bels (LFF non hot-plug base)

  • 3.7 Bels (LFF hot-plug base)

  • 4.2 Bels (LFF hot-plug performance)

L pAm
  • 21 dBA (LFF non hot-plug base)

  • 21 dBA (LFF hot-plug base)

  • 25 dBA (LFF hot-plug performance)

top

Safety certifications

Specification
Description
FCC rating
Class B
Normative standards
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1

top

Shipping Information

Express Computer Systems can ship to virtually any address in the world and provides you with the best shipping rates possible. Cost of shipping varies depending on what service you require, your destination and size of the shipment. Shipping costs will be calculated separately from your order and billed to you post purchase. In the notes section of your order please provide us with your preferred shipping method and we will get back to you.

Custom configured orders ship within 2 business days after all required products are in stock.

Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine, California.

Domestic Shipments
  • Standard Ground
    • Shipping time: 2-7 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-10 business days
    • Excludes weekends, holidays or weather delays.
  • 3 Business Days
    • Shipping time: 3 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 3-6 business days
    • Excludes weekends, holidays or weather delays.
  • 2 Business Days
    • Shipping time: 2 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-5 business days
    • Excludes weekends, holidays or weather delays.
  • Overnight / Next Business Day
    • Shipping time: 1 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 1-4 business days
    • Excludes weekends, holidays or weather delays.
International Shipments
  • International Economy
    • Shipping time: 4-6 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 5-9 business days
    • Excludes weekends, holidays or weather delays.
  • International Priority
    • Shipping time: 1-3 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-6 business days
    • Excludes weekends, holidays or weather delays.

For more information on shipping view our Shipping Information page or send us a message

ECS Warranty Information

Express Computer Systems (ECS) provides a 1 year parts warranty against defects in material or workmanship that will affect the products functionality. All refurbished items are tested prior to shipping to guarantee up-time upon arrival. If you are having issues with an item we provided please Contact Us and we will do our best to assist you.

What does our ECS warranty cover?
We offer 1 year warranty as standard and additional years can be added to fit your needs. Please reach out to a sales associate via the Contact Us page or live chat for more information on extended coverage options. During the coverage period if your product fails we will offer a Next Business Day replacement. If we are unable to replace the product we will refund its original selling price. Shipping costs and tax are not refundable. Express Computer Systems retains the right to decide whether the goods will be replaced or refunded.

What is not covered by our warranty?
Our warranty does not cover any problem caused by the following conditions:

  1. accidents; misuse; carelessness; electrostatic discharge; shock; temperature or humidity beyond the specifications of the product; improper installation; operation; modification;
  2. any improper use that contravenes the instructions in the user manual;
  3. problems caused by other equipment. Our warranty is void if the product is returned with damaged, removed, counterfeit labels, or any modifications (including any component or external cover removal). Our warranties do not cover data loss or damages to any other equipment. In addition, our warranties do not cover incidental damages, consequential damages, or costs related to data recovery, removal, and installation.

Important notes:

  • Please ask for additional warranty/coverage that you may require in addition to the standard 1 ECS warranty prior to final purchase. Requesting additional warranty after your purchase can be denied.
  • FREE technical support is provided on purchased items via phone, email, or live chat.

About Express Computer Systems

Express Computer Systems is committed to transforming our customers’ IT infrastructure with high quality products at affordable costs. Our sales reps and customer support engineers understand our customers rely heavily on advanced technology to run their business but need to do so without breaking the bank.

We specialize in building custom server configurations, custom storage solutions, networking solutions, and components from top manufacturers including HPE, Dell, Cisco, NetApp, Dell EMC, HPE Nimble and many others.

Subscribe