Your Cart is Empty
Base Standard Capabilities
Product features
Feature | Description | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Processor (One of the following depending on model) | E5-2600 v2 series Processors Entry processors: 1
Base processors: 2
Performance processors: 3
E5-2600 series Processors Entry processors: 4
Base processors: 1
Performance processors: 5,6
| ||||||||||||||||||||||||||||||
Cache memory (One of the following depending on model) |
| ||||||||||||||||||||||||||||||
Chipset |
| ||||||||||||||||||||||||||||||
Upgradeability | Upgradeable to two processors | ||||||||||||||||||||||||||||||
On system management chipset | HP iLO (Firmware: HP iLO 4) | ||||||||||||||||||||||||||||||
Memory protection | Advanced ECC (multi-bit error protection) | ||||||||||||||||||||||||||||||
Memory |
| ||||||||||||||||||||||||||||||
Network controller | HP Ethernet 1Gb 2-port 361i Adapter | ||||||||||||||||||||||||||||||
Storage controller | HP Dynamic Smart Array B320i Controller | ||||||||||||||||||||||||||||||
Expansion slots |
| ||||||||||||||||||||||||||||||
Storage controller | HP H220i Host Bus Adapter (B320i Dynamic Smart Array with FW update) | ||||||||||||||||||||||||||||||
Internal storage devices |
| ||||||||||||||||||||||||||||||
Maximum internal storage |
| ||||||||||||||||||||||||||||||
Interfaces |
| ||||||||||||||||||||||||||||||
System fans |
| ||||||||||||||||||||||||||||||
Graphics | Integrated Matrox G200 video standard
HP iLO 4 On System Management Memory
| ||||||||||||||||||||||||||||||
Form factor |
| ||||||||||||||||||||||||||||||
NOTE: 1. All support up to 1333 MHz DDR3 memory speeds. 2. All support up to1600 MHz DDR3 memory speeds. 3. All support up to 1866 MHz DDR3 memory speeds. For 130 W CPU support and configuration, please contact your HP account team. For 115 W CPU support, customers must use the HP 1500 W Common Slot Platinum Plus Hot Plug Power Supply Kit (684532-B21). 4. All support up to 1066 MHz memory speeds. 5. All support up to 1600 MHz DDR3 memory speeds. For 130 W CPU support and configuration, please contact your HP account team. For 115 W CPU support, customers must use the HP 1500 W Common Slot Platinum Plus Hot Plug Power Supply Kit (684532-B21). HT indicates that the processor model supports Intel Hyper-Threading Technology. Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 8, 7, 6, 5, 4, 3, 2 or 1 core(s) active. DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed. Up to 2 processors supported. Mixing different processor models is not supported. For the Intel C600 Chipset E5-2600 Series, the letter preceding the model number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs. 6. This kit includes only 1 fan. This selection must be ordered in quantities of 8 (PN 617856-B21) 7. This kit includes only 1 fan. This selection must be ordered in quantities of 8 (PN 617858-B21). All 8 fan bays must be populated with either redundant or non-redundant fans. Mixing and matching of fans is not allowed. | |||||||||||||||||||||||||||||||
Specs 1
Software overview
Feature | Description |
|---|---|
Operating systems and virtualization software support for ProLiant servers1 |
|
On System Management | HP iLO Management Engine |
HP Insight Management | HP Service Pack for ProLiant (SPP) |
NOTE: 1: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for the server. Click here to visit the Support Matrix . | |
Physical specifications
Specification | Description |
|---|---|
Dimensions (H x W x D) Add fan extension kit (with bezel) | 17.68 x 44.8 x 89.55 cm (6.96 x 17.638 x 35.236 in) |
Weight (approximate) | 99.8 kg (220 lb) - Maximum (all hard drives, power supplies, and processor installed) |
Electrical specifications
Specification | Description |
|---|---|
Input requirements
(per power supply) | |
Rated line voltage |
|
Rated input current |
|
Rated input frequency | 47 to 63 Hz |
Rated input power |
|
Power supply output (per power supply) | |
Rated steady-state power |
|
Environmental specifications
Specification | Description |
|---|---|
System inlet temperature | |
Operating | 10° to 35°C (50° to 95° F) at sea level with an altitude derating of 1.8°F per every 1000 ft (1.0°C per every 304.8 m) above sea level to a maximum of 10,000 ft (3048 m), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 30°C (86°F). |
Non-operating | -30° to 60°C (-22° to 140°F) |
Relative humidity (non-condensing) | |
Operating | 10% to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing. |
Non-operating | 5% to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing. |
Altitude | |
Operating | 3048 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min). |
Non-operating | 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min). |
Acoustic noise | Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
|
Safety certifications
Specification | Description |
|---|---|
Emissions Classification (EMC)1 | |
FCC rating | Class A |
Normative standards | CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1 |
Industry standard compliance |
|
NOTE: 1. Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements. | |
