Multi-Quantity Discounts Available for ALL Line Items
** LARGE DISCOUNTS available for complete systems. Pricing displayed is for single item purchases **
Use the configuration tool to create your solution and submit it us for a quote OR send us a message with your complete build requirements to receive best pricing
READ ME
- Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
- “Submit for Quote” items can be added to your cart and sent to us via the cart page
- Click the blue bar to close/open a section from view after choosing your options
Select Chassis
8LFF CTO server models ship with 4 standard fans.
The 8 LFF chassis cannot be upgraded to 12 LFF front in the field.
Select Processor
All SKUs below ship with a processor only. Adequate fans and heatsinks must be selected.
Mixing of 2 different processor models is NOT allowed.
Processors with TDP greater than 150W require High Performance Heatsink (P48818-B21).
Q series processors require Max Performance Heat Sink (P48817-B21)
8470Q processor is not supported with 12LFF CTO Server and 24SFF CTO Server.
Platinum
supports up to 2 processors.
Gold
supports up to 2 processors.
Silver / Bronze
supports up to 2 processors.
Heat sinks / Fans / Cooling Modules
This section holds Heat Sinks, Fans, and DLC modules.
CPUS with “Q” series processors = Max Performance Heat Sink (P48817-B21)
CPUs with TDP equal to or lower than 150W = Standard Heat Sink.
CPUs with TDP over 150W = High-Performance Heat Sink.
If you install the 4LFF Mid-Tray and your CPU TDP is over 150W. You will need to Low-Profile version of a High-Performance Heat sink (P48905-B21).
High-Performance Fan are required In general, when rear drives are installed, or CPU TDP > 205W, or High-Performance NVMe drives, three drive cages, mid-tray, GPU card, or certain backplanes are populated.
If this GPU is selected with Intel Liquid Cooled Processors (Q) then Direct Liquid Cooling (DLC) must be selected.
DLC Modules need certain cables to work. They are at the bottom of this list.
For all rules please read the manual or view each item to read the notes.
Memory
DIMM Blanks are optional and not required.
96GB memory cannot be mixed with any other memory.
Mixing of x4 and x8 memory is not allowed
Mixing of 3DS memory and non-3DS memory is not supported
256GB DIMM will also need to limit the maximum front-end cage to two.
Memory with larger than 128GB capacity will need High-Performance Fan Kit (P48820-B21) and ambient limitation.
Storage Devices (Optional)
Storage Batteries & Cables (Optional)
Drive cage and backplane (Optional)
The LFF Chassis has many options for expanding the Storage of the server.
Supports 1 Side by Side front drive.
1 ODD in the front
4LFF Mid-Tray
Both LFF and SFF Rear Drives
Optical Drive / Cables (Optional)
Supports 1 ODD in the front media bay
No support in 12 LFF or 24 SFF models.
Large Form Factor SAS Drives HDD/SSD (Optional)
LFF SSD's are at the bottom of this list.
Large Form Factor SATA Drives HDD/SSD (Optional)
LFF SSD's are at the bottom of this list.
Small Form Factor SAS Drives SSD/HDD (Optional)
Some of the Expanded Storage options hold SFF Drives.
Small Form Factor SATA Drives SSD/HDD (Optional)
Some of the Expanded Storage options hold SFF Drives.
NVMe Drives (Optional)
If some of the SFF SSD Drive cages are Direct Attached, they only support NVMe drives. For example. The side-by-side 2 SFF Front drives is this way.
If NVMe Drives are selected, then High Performance Fan Kit is required.
OS BOOT Device (Optional)
IF the DLC NS204 (P62023-B21) is installed, you are not able to install the NS204i Boot Device. They take up the same slots.
If external accessible drives are needed please add trigger SKU P54542-B21 HPE ProLiant DL380 Gen11 NS204i-u FIO Bundle Kit.
Riser Card (Optional)
The Primary Riser shipping default in the CTO server is a x8 FH, FL, x16 FH, FL, and x8 FH, HL.
For a Secondary/Tertiary riser, the second processor is required.
x16 cards installed on x8 slots could observe sub-optimal performance.
Some risers require cables which are at the bottom of this list.
Please view each item to read the requirements and limitations of each riser.
OCP Enablement (Optional)
If you install an x16 OCP card you will need to expand the OCP 3.0 slot from an x8 to and x16.
OCP cards (Optional)
Networking adapters below can be selected as the primary networking choice when configuring a Networking Choice (NC) Configure-to-Order (CTO) chassis. The DL380 Gen11 NC CTO chassis does not come with embedded networking, hence the requirement to configure with either a FlexibleLOM or select PCIe networking adapter.
Networking PCI (Optional)
Networking adapters below can be selected as the primary networking choice when configuring a Networking Choice (NC) Configure-to-Order (CTO) chassis. The DL380 Gen11 NC CTO chassis does not come with embedded networking, hence the requirement to configure with either a FlexibleLOM or select PCIe networking adapter.
Infini Band PCI/OCP (Optional)
OCP 3.0 Cards at the top.
These OCP x16 cards are only supported in OCP slot 2. You must install the HPE ProLiant DL3XX Gen11 OCP2 x16 Enablement Kit (P48828-B21)
Fibre Channel HBA (Optional)
GPU (Optional)
If the "Intel Data Center GPU Max 1100" GPU is selected with Intel Liquid Cooled Processors (Q) then Direct Liquid Cooling (DLC) must be selected.
Please view each GPU for requirements and limitations. Or, read the manual for all the GPU details.
Security (Optional)
If HPE Trusted Supply Chain SKU (P36394-B21) is selected then the "Intrusion Cable Kit" must also be selected.
Rail Kit (Optional)
The Easy Install Rail 3 Kit does not include a Cable Management Arm (CMA) (P22020-B21).
Power Supplies
Select a minimum (1), or maximum (2) power supplies.
All power supplies in a server should match. Mixing Power Supplies is not supported.
Helpful Tip: Once desired configuration is selected click "Add to Cart". From the cart page you can submit a submit a quote request for best pricing
The HPE ProLiant DL380 Gen11 server is a scalable 2U 2P solution that delivers exceptional compute performance expandability, and scalability for diverse workloads and environments at 1P economics. Powered by 4th Gen Intel® Xeon® Scalable Processors with up to 60 cores, increased memory bandwidth, and high-speed PCIe Gen5 I/O, the HPE ProLiant DL380 Gen11 server is a perfect dual-socket, 2U/2P, scalable solution.
The silicon root of trust anchors the server firmware to an HPE-exclusive ASIC, creating a fingerprint for the Intel® Xeon® Scalable Processor that must be matched exactly before the server will boot.
The DL380 Gen11 CTO Options:
What's new
· Powered by the 4th Generation Intel® Xeon® Scalable Processors with next-generation technology that support up to 60 cores at 350W and 16 DIMMs for DDR5 memory at speeds up to 4800 MHz.
· Support for up to 8 TB total DDR5 memory with 16 DIMM channels per processor delivers increased performance, lower power requirements, and High Bandwidth Memory (HBM) support.
· Support for PCIe Gen5, resulting in improved bandwidth, advanced data transfer rates, and higher network speeds from the PCIe Gen5 serial expansion bus.
· Includes the new HPE Integrated Lights-Out 6 (iLO 6) server management software that enables you to securely configure, monitor, and update your HPE ProLiant Gen11 servers seamlessly, from anywhere.
· Supports hot-pluggable, high-availability RAID M.2 boot options.
· Supports up to 8 single wide (SW) or 3 double wide (DW) GPUs to accelerate graphic intense workloads.
Know your Server - CTO Configuration Support
Need help with the configuration? Contact us today!
HPE ProLiant DL380 Gen11 8LFF Base Knowledge
Since this Server is so large and has so many configurations, we have broken it up by chassis to make this information a little easier for you to digest.
Chassis
- 8LFF supporting 2SFF front, and up to 4LFF rear or 2SFF rear drive bay options
- The 8 LFF chassis cannot be upgraded to 12 LFF front in the field.
- The 2 LFF primary and 2LFF secondary rear cages are supported in LFF chassis only.
- The 2 LFF primary and 2LFF secondary rear cages will consume all PCIe slots for the primary and secondary riser, respectively.
Processor
- Processors do not ship with heatsinks or fan kits, these must be ordered separately.
- Processors with TDP equal to or greater than 150W through 350W require High Performance Heatsink (P48818-B21)
- Processors with TDP greater than 150W through 350W and mid-tray drive cage require HPE DL3xx/560 Gen11 High Performance Heatsink (P48905-B21)
- “Q” processors require Max Performance Heatsink (P48817-B21)
- Processors with TDP equal to or less than 150W require Standard Heatsink (P49145-B21)
- Liquid-cooled CPUs require Maximum Performance Heat Sink (P48817-B21). One heatsink covers both CPUs.
Max Internal Storage
| Drive |
Capacity |
Configuration |
| Hot Plug SFF SAS HDD |
91.2 TB |
24+8+6 x 2.4TB |
| Hot Plug SFF SAS SSD |
583.3 TB |
24 +8+6 15.35TB |
| Hot Plug SFF SATA HDD |
76 TB |
24+8+6 x 2 TB |
| Hot Plug SFF SATA SSD |
291.84 TB |
24 +8+ 6 x 7.68 TB |
| Hot Plug LFF SAS HDD |
360 TB |
12+4+4x 18 TB (with optional rear LFF drive cage) |
| Hot Plug LFF SATA HDD |
360 TB |
12+4+4 x 18 TB (with optional rear LFF drive cage) |
| Hot Plug SFF NVMe PCIe SSD |
374.4 TB |
24+ x 15.36TB + 6 x 960GB<10W (with optional rear Primary and Secondary 2SFF) |
Heatsink & Fans
This system has 4 Heatsinks for select reasons. You have the Standard (P49145-B21), High-Performance 2U (P48818-B21), High-Performance LP (P48905-B21), and Max Performance (P48817-B21). Based on the CPU TDP, the Heatsink will change as well if you install a Mid-Drive Cage. Then you'll be forced to install the Low Profile Heatsink (P48905-B21).
In general, the Maximum Performance fan kit is required when rear drives, or >205W Processors SKUs, or High-Performance NVMe drives, three drive cages, mid-tray, GPU card, or certain backplanes are populated.
High-Performance fan kit consists of 6 fans, these will need to replace all the standard fans in the unit and fill all 6 fan cages.
The 8LFF CTO server models ship with 4 standard fans.
Liquid Cooling
There are two Liquid Cooling options for this server. If any are installed, you must also install the correct Tubes for the cooling system to work properly. Please keep in mind the PCIe slot amount. One of these LCs takes up a PCIe slot and is usually installed when a GPU is selected. Some GPUs are DW and take up two slots. Even with 8 PCIe slots you can run out of room fast.
Memory
DIMM Blanks are optional and not required.
Mixing of 3DS memory and non-3DS memory is not supported
Mixing of x4 and x8 memory is not allowed
Mixing of DIMM types (UDIMM, RDIMM, and LRDIMM) is not supported.
If 96GB or higher density memory is selected then High Performance Fan Kit must be selected.
96GB memory cannot be mixed with any other memory.
Expansion Slots
This system has up to 8 PCIe slots and 2 OCP ports. The OCP ports have enablement kits to provide x8 or x16 functionality to the slots. Please take a look at which controller you are trying to install and the slot diagram below to know which slot each controller should be installed in.
| OCP Slot Location |
1 OCP Storage Controller (OROC) + 1OCP NIC |
1 OCP NIC |
2 OCP NICs |
1 OCP Storage Controller (OROC) |
2 OCP Storage Controllers (OROC) |
| OCP 1 |
OROC |
N/A |
OCP NIC |
OROC (Higher priority) |
OROC (Higher priority) |
| OCP 2 (with shared NIC and WoL) |
OCP NIC |
NIC (higher priority) |
OCP NIC (higher priority) |
N/A |
OROC |
| Riser Information |
|---|
| Part Number |
Description |
Riser Position |
Bus Width (Gen5 Lanes) |
| Primary |
Secondary |
Tertiary |
Top Slot |
Middle Slot |
Bottom Slot |
| N/A |
This is the default riser in the chassis |
D |
N |
N |
x8 |
x16 |
x8 |
| P48803-B21 |
HPE DL380 Gen11 x16/x16/x16 Primary Riser Kit |
O |
N |
N |
x16 |
x16 |
x16 #1 |
| P51083-B21 |
HPE DL380 Gen11 x16/x16/x16 Secondary Riser Kit |
N |
O |
N |
x16 |
x16 |
x16 #2 |
| P48802-B21 |
HPE DL38X Gen11 x8/x16/x8 Sec Riser Kit |
N |
O |
N |
x8 |
x16 |
x8 |
| P48804-B21 |
HPE DL38X Gen11 2x16 Tertiary Riser Kit |
N |
N |
O |
x16 |
x16 #3 |
|
| P48805-B21 |
HPE ProLiant DL380 Gen11 2U Primary/Secondary NEBS-compliant Riser Kit |
O |
N |
N |
x8 |
x16 |
x8 |
| P48806-B21 |
HPE ProLiant DL380 Gen11 2U Secondary/Tertiary NEBS-compliant Riser Kit |
N |
O |
N |
x8 |
x16 |
x8 |
Notes:
− D = Default on chassis; O = Optional; N = not supported or slot/connector not present.
− #1 Requires HPE DL380 Gen11 x16/x16/x16 Primary Cable Kit (P56073-B21)
− #2 Requires HPE DL380 Gen11 x16/x16/x16 Secondary Cable Kit (P56074-B21)
− #3 PCIe Gen4 lanes.
− x16 cards installed on x8 slots could observe sub-optimal performance. |
GPU
System memory should be 2x of GPU memory. Most GPUs need an LC system installed so please take note of the PCIe slots used and which PCIe slot you install the GPU in. Some GPUs require certain parts or have limitations. To view all the rules for each GPU please view the item.
| GPU Information |
|---|
| Part number |
Card |
QTY Support |
PCIe |
8SFF |
16SFF/8LFF |
24SFF/12LFF |
| S1T66C |
Intel® Data Center GPU Max 1100 |
2 |
Gen5 |
2@35C(Air) |
2@35C(Air)
if CPU ≤ 185W. |
Not Supported |
| R9S41C |
NVIDIA H100 80GB PCIe Accelerator |
2 or 3 |
Gen5 |
2@25C (Air)
3@20C (DLC) |
2 @ 20C (Air)
2 @ 25C (DLC) |
Not supported |
| S0K90C |
NVIDIA L40 48GB PCIe Accelerator |
3 |
Gen4 |
3@25C(Air)
3@25C(DLC) |
2@25C(Air)
3@25C(DLC) |
1@25C(Air)
2@25C(DLC) |
| S0K89C |
NVIDIA L4 24GB PCIe Accelerator |
8 |
Gen4 |
8 |
8@25C(Air)
8@25C(DLC) |
5@25C(Air)
8@25C(DLC) |
| R9P49C |
NVIDIA A100 80GB PCIe Non-CEC Accelerator |
3 |
Gen4 |
30C |
25C |
Not supported |
| R8T26C |
NVIDIA A16 64GB PCIe Non-CEC Accelerator for HPE |
3 |
Gen4 |
30C |
25C |
Not supported |
Storage Controllers
Additional front and rear drive bays are optional. The system has many Tri-Mode controllers to choose from since each model supports mixed drives. If your system does not have a storage controller installed and the drives are directly attached then you have the possibility to enable VROC. There are two versions of VROC and one only supports NVMe SSD while all models feature an embedded storage controller, with embedded software SATA RAID support for up to 14 bays. To view more about VROC please view the manual.
When installing a controller please take note of what PCIe slot and the lane amount. If you plug a x16 card into an x8 slot you might have some performance issues. If you install a controller with cache, you must also install either (P02377-B21) HPE Smart Storage Hybrid Capacitor with 145mm Cable Kit or (P01366-B21) HPE 96W Smart Storage Lithium-ion Battery with 145mm Cable Kit.
Integrated Lights-Out 6 (iLO 6)
Software that enables you to securely configure, monitor, and update your HPE ProLiant Gen11 servers seamlessly, from anywhere.
Embedded in Hewlett Packard Enterprise servers, HPE Integrated Lights-Out 6 (iLO 6) is an exclusive core intelligence that monitors server status, providing the means for reporting, ongoing management, service alerting, and local or remote management to identify and resolve issues quickly.
Power
Select a minimum (1), or maximum (2) power supplies. The mixing of 2 different power supplies is NOT allowed.
Dimensions & Weight:
LFF CTO servers:
8.75 x 44.8 x 73.25 cm / 3.44 x 17.64 x 28.84 in
12 LFF hard drives (no rear drives), 2x processors, 2x power supplies, 1x RAID controller, 2x Risers installed)
- Maximum: 37kg/81.57 lbs
- Minimum: 18kg/39.68 lbs
SFF CTO servers:
8.75 x 44.8 x 72.7. cm / 3.44 x 17.64 x 28.62 in
8 SFF hard drives (no rear drives), 2x processors, 2x power supplies, 1x RAID controller, 2x Risers installed)
- Maximum: 33kg/72.75 lbs
- Minimum: 16kg/35.27 lbs
