Previous | Next
Home / iSCSI / Dell EMC Unity 300 Hybrid
SKU: DEU-300

Dell EMC Unity 300 Hybrid

Dell

| Server
Contact For Pricing

Thanks for the request. We'll get back to you with in 24 hours.

Quick Specs

  • Form Factor: 2U
  • Max Drives: 5/150
  • Hybrid Storage Max Fast Cache: 800GBs
  • Max. raw capacity (PB): 2.4PB
  • Drives Supported: SAS, NL-SAS and Flash
  • Max DAE: 9
  • RAID Options: 1/0, 5, 6
  • Max Memory: 48GB
  • Supported Back-End I/O modules: None
  • I/O Supported: Support for File, Block (FC, iSCSI & FCoE) and Unified
12-drive DPE:

3.4 inches high x 17.5 inches wide x 27 inches deep (8.64 cm x 44.45 cm x 68.58 cm) 65 lb (29 kg)

25-drive DPE:

3.4 inches high x 17.5 inches wide x 24.17 inches deep (8.64 cm x 44.45 cm x 61.39 cm) 44 lb (20 kg)

Disk Array Enclosure (DAE)

The Dell EMC Unity 300 supports all three types of DAE’s with a max being either 9 DAE’s or 150 drives. When calculating the number of drives make sure to count the DPE drives as well in the total.

  • 2U 25-drive DAE with 2.5-inch drives
  • 3U 15-drive DAE with 3.5-inch drives
  • 3U 80-drive DAE with 2.5-inch drives

All Hybrid Models support 2 Drive Carrier types. The 12x3.5” and the 25x2.5”. Flash models only support the 25x2.5” Drive Carriers. Each unit has 2 Storage Processors (SP’s) in the rear with 2 CNA ports and 2 Module slots that can hold up to 6 different modules.

The Dell EMC Unity hybrid models are the only ones to support FAST and FAST VP technology which helps with tiered storage and accessibility to high-frequency data.

Storage Processor (SP):

The Dell EMC Unity 300 has 2 Storage Processors.

Each SP comes with:
  • Intel Xeon E5-2603 6-Core 1.6 GHz processor.
  • 3 8GB DDR4 DIMM for a total of 24GB of memory
  • 2 embedded CNA ports (4 configurations possible)
  • 2 10GbaseT ports
  • 2 mini-HD SAS ports
  • 2 PCI 3.0, x8 lane I/O module slots (6 Modules supported)
I/O Modules:

Each SP has two slots that can support 6 different options.

  • Four-port 12-Gb/s SAS I/O module
  • Four-port 16-Gb/s Fibre Channel I/O module
  • Four-port 10-Gb/s optical I/O module
  • Four-port 10GBASE-T I/O module
  • Four-port 1GBASE-T I/O module
  • Two-port 10Gb/s optical I/O module

Note: When adding new I/O modules, always install I/O modules in pairs—one module in SP A and one module in SP B. Both SPs must have the same type of I/O modules in the same slots. Please read the manual below for more details to each module listed above.

CNA Ports:

Each SP contains two integrated CNA ports (labeled 4 and 5). These ports are PCI Express 3.0 x4 adapters that provide interfaces that can be configured as Ethernet, or Fibre Channel, but once set to a protocol, cannot be changed. If CNA ports are set to Ethernet, you can use 1Gb/s, 10Gb/s SFPs, Twin-AX for File (IP), or iSCSI Block access. If the ports are set to Fibre Channel, then you can use SFPs supporting 4, 8, 16 Gb/s FC multi-mode, or single-mode SFPs supporting 16Gb/s only.

Note: The four CNA ports cannot be configured independently; they must all be configured with the same network protocol.

Standby Power Supply

12 DPE
  • AC 100 to 240 VAC ± 10%, single phase, 47 to 63 Hz
  • DC Line Voltage -39 to -72 V DC (Nominal -48V or -60V power systems)
25 DPE
  • AC 100 to 240 VAC ± 10%, single phase, 47 to 63 Hz
  • DC Line Voltage -39 to -72 V DC (Nominal -48V or -60V power systems)
Looking to Customize?

Not seeing the exact specs you need?
Start your build today with Express Computer Systems!

Start Customizing Today!

Spec Sheet 4

Dell EMC Unity Hybrid
Dell EMC Unity Hybrid Flash Units
Limit description Unity 300 Unity 400 Unity 500 Unity 600
CPU type in SP 6-core 1.6 GHz (E5-2603) 8-core 2.4 GHz (E5-2630) 10-core 2.6 GHz (E5-2660) 12-core 2.5 GHz (E5-2680)
Memory per SP 24 GB 48 GB 64 GB 128 GB
Three 8 GB DDR4 DIMMs Three 16 GB DDR4 DIMMs Four 16 GB DDR4 DIMMs Four 32 GB DDR4 DIMMs
Embedded CNA ports per SP 2 ports, configurable as either:
  • 8/16 Gb Fibre Channel
  • 4/8/16 Gb Fibre Channel
  • 16 Gb Fibre Channel (single mode)
  • 1/10 Gb IP/iSCSI
Embedded 10GbaseT ports per SP 2 ports
Max. SAS I/O ports per SP 2 (2 embedded mini-HD SAS ports) 2 (2 embedded mini-HD SAS ports) 6 (2 embedded and 4 I/O mini-HD SAS ports) 6 (2 embedded and 4 I/O mini-HD SAS ports)
Max. number of I/O modules per SP 2
Supported Back-End I/O modules None Four-port 12-Gb/s SAS
Supported Front-End I/O modules
  • Four-port 16-Gb/s Fibre Channel
  • Four-port 10-Gb/s optical
  • Four-port 10GBASE-T
  • Four-port 1GBASE-T
  • Two-port 10Gb/s optical
Max. number of Front-End ports per SP (all types) 12
Max. number of Front-End Fibre Channel ports per SP (CNA and I/O modules) 10
Max. number of Front-End ports 1GbaseT/iSCSI ports per SP (Onboard, CNA, and I/O modules) 8
Max. number of Front-End ports 10GbE iSCSI ports per SP (Onboard, CNA, and I/O modules)
Min./Max. number of drives 5/150 5/250 5/500 5/1000
Disk-array enclosures types supported
  • 2U 25-drive DAE with 2.5-inch drives
  • 3U 15-drive DAE with 3.5-inch drives
  • 3U 80-drive DAE with 2.5-inch drives
Max. number of DAEs supported per system *a Up to 1 Up to 15 Up to 33 Up to 59
Max. number of 80-drive DAEs supported per system 1 2 5 12
Max. raw capacity (PB) 2.4 4 8 16
*a. Depending on the DPE and DAE types in the system. Maximum DAE limits shown here use the 12-drive DPE and 15-drive DAE. Higher capacity DPE/DAEs support fewer maximum DAEs.

Dell EMC Unity All Flash
Dell EMC Unity All Flash Units
Limit description Unity 300F Unity 350F Unity 400F Unity 450F Unity 500F Unity 550F Unity 600F Unity 650F
CPU type in SP 6-core 1.6 GHz (E5-2603) 6-core 1.7 GHz (E5-2603) 8-core 2.4 GHz (E5-2630) 10-core 2.2 GHz (E5-2630) 10-core 2.6 GHz (E5-2660) 14-core 2.0 GHz (E5-2660) 12-core 2.5 GHz (E5-2680) 14-core 2.4 GHz (E5-2680)
Memory per SP 24 GB 48 GB 48 GB 64 GB 64 GB 128 GB 128 GB 256 GB
Three 8 GB DDR4 DIMMs Three 16 GB DDR4 DIMMs Three 16 GB DDR4 DIMMs Four 16 GB DDR4 DIMMs Four 16 GB DDR4 DIMMs Four 32 GB DDR4 DIMMs Four 32 GB DDR4 DIMMs Four 64 GB DDR4 DIMMs
Embedded CNA ports per SP 2 ports, configurable as either:
  • 8/16 Gb Fibre Channel
  • 4/8/16 Gb Fibre Channel
  • 16 Gb Fibre Channel (single mode)
  • 1/10 Gb IP/iSCSI
Embedded 10GbaseT ports per SP 2 ports
Max. SAS I/O ports per SP 2 (2 embedded mini-HD SAS ports) 6 (2 embedded and 4 I/O mini HD SAS ports)
Max. number of I/O modules per SP 2
Supported Back-End I/O modules None Four-port 12-Gb/s SAS
Supported Front-End I/O modules
  • Four-port 16-Gb/s Fibre Channel
  • Four-port 10-Gb/s optical
  • Four-port 10GBASE-T
  • Four-port 1GBASE-T
  • Two-port 10Gb/s optical
Max. number of Front-End ports per SP (all types) 12
Max. number of Front-End Fibre Channel ports per SP (CNA and I/O modules) 10
Max. number of Front-End ports 1GbaseT/iSCSI ports per SP (Onboard, CNA, and I/O modules) 8
Max. number of Front-End ports 10GbE iSCSI ports per SP (Onboard, CNA, and I/O modules) 12
(Dell Unity OE 4.1 and later) Min./Max. number of drives *a 5/150 5/150 5/250 5/250 5/500 5/500 5/1000 5/1000
(Dell Unity OE 4.0 only) Min./Max. number of drives 5/150 N/A 5/250 N/A 5/350 N/A 5/500 N/A
Disk-array enclosures types supported 2U 25-drive DAE with 2.5-inch drives
3U 80-drive DAE with 2.5-inch drives
Max. number of 2U 25-drive DAEs supported 5 5 9 9 19 19 39 39
Max. number of 3U 80-drive DAEs supported 1 1 2 2 5 5 12 12
Max. raw capacity (PB) 2.4 2.4 4 4 8 8 16 16
*a. The minimum number of drives required to create a 4+1 RAID group is five. Four drives are required for starting up the array

You may also like