Please remove $0 item(s) from cart - or - Request for Quote

This website performs best when viewed from a Desktop

All

  • All
  • AMD
  • APC
  • Avago
  • Brocade
  • Cisco
  • Dell
  • Dell CTO
  • ECS
  • EMC
  • EqualLogic
  • Express Computer Systems
  • Hitachi
  • HPE
  • Hynix
  • IBM
  • Intel
  • Mellanox
  • Micron
  • NetApp
  • Nvidia
  • OEM
  • Samsung
  • Seagate
  • Toshiba
  • Xilinx

    Dell PowerEdge FC830 Blade Server Chassis (2xPCIe + 6x2.5" SATA)

     
    Price: Request a Quote

    Brand:  
    MPN:  
    DPE-FC830-2xPCIE+6x2.5-Chassis
    Type:  
    Chassis
    Condition:  
    ECS Refurbished & Tested

    Request Quote

    Note: Please include as much details and relevant options about the item to help us match your request with an accurate price.


    -PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
    -SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.

    Dell PowerEdge FC830 Blade Server Chassis (2xPCIe + 6x2.5" SATA)

    Quick Specs

    Form Factor:

    1U Full Width Blade server
    2 sleds per FX2 Enclosure

    Processor | Max: 22 Cores per 48 Total

    4x Intel Xeon E5-2600v4

    Memory | Max: 1.5TB

    48 DDR4 RDIMM 2400Mhz

    Boot Device:

    IDSDM

    Storage | Max: N/A

    6x 2.5" + 2x NVMe

    Networking:

    2x bNDC Supported

    Mezzanine Storage Controllers:

    S140 (SW RAID)
    miniPERC H330, H730, H730P

    PCIe Mezzanine Slots:

    4x PCIe 3.0 (x8) expansion slots
    When a Single FC830 is paired with two FD332 storage modules, the full-width sled server has access to all eight PCIe slots on the FX2s chassis.

    GPU:

    None

    Ideal for:

    • High-Performance Computing (HPC)
    • Virtualization
    • Web Tech

    This is one of the supported Node Servers, the PowerEdge FX2 or PowerEdge FX2s must be configured separately.

    Dell PowerEdge FX Architecture Server Options

    The PowerEdge FC640 delivers powerful performing processors, large memory capacity and highly scalable I/O capability that meet virtualization, server consolidation, scale-out, private cloud or hybrid cloud needs.

    The FX2 chassis has two versions:
    • PowerEdge FX2s: “switched” configuration supporting up to eight low-profile PCIe 3.0 expansion slots
    • PowerEdge FX2: lower-cost “unswitched” configuration that does not offer expansion slots.
    Supported Chassis Options

    The FC830 does not support the mixing of SAS and SATA drives in the same chassis.

    FC830 16x 1.8" View FC830 Blade Server

    Storage:

    16x 1.8" SAS Drives

    SATA_BP connector

    SAS backplane cable connector that connects SSDs populated in bays 0-7 to the system board through an expander card.

    J_PERC connector

    SAS drive backplane cable connector that connects SSDs populated in bays 8–15 to the system board.

    FC830 2xPCIe + 6x2.5" View FC830 Blade Server

    Storage:

    2xPCIe + 6x2.5" SATA Drives

    SATA_BP connector

    2SATA drive backplane cable connector that connects six hard drives or SSDs to the system board

    J_PERC connector

    PCIe drive backplane cable connector that connects two PCIe SSDs to the system board.

    FC830 8x 2.5" SAS View FC830 Blade Server

    Storage:

    8x 2.5" SAS Drives

    J_PERC connector

    SAS backplane cable connector that connects eight hard drives or SSDs to the system board.

    FC830 8x 2.5" SATA View FC830 Blade Server

    Storage:

    8x 2.5" SATA Drives

    SATA_BP connector

    SATA backplane cable connector that connects eight hard drives or SSDs to the system board.


    The FC830 is a Powerful 4-socket server with dense compute, memory scalability and a highly expandable storage subsystem, the Dell PowerEdge FC830 is designed for data centers requiring the performance and reliability enterprise applications demand.

    With powerful processors, enormous memory and highly scalable I/O capabilities, the PowerEdge FC830 excels at running a wide range of database-driven, mission-critical applications for midsize and large businesses, like enterprise resource planning (ERP) and customer relationship management (CRM). Combining exceptional performance and data access capabilities, the FC830 is also ideal for the database tier of web tech and HPC environments or large-scale virtualization.


    Flexible, scalable, powerful

    Powered by up to four 22-core Intel Xeon E5-4600 v4 processors, each FC830 has 48 DIMMs, 16 x 1.8-inch, or eight 2.5-inch front access drives, a dual-port 10GB select network adapter (SNA) and access to four PCI Express (PCIe) expansion slots in the shared chassis.


    Mezzanine Fabric B1, B2, & C1, C2

    The FC830 is a Full-Width Blade server which means it supports double the components of the half-width blade server. The FX servers can only support up to 2 Full-Width blade servers in one enclosure. For a total of 8 Mezzanine Cards installed. Therefore the FC830 has access to all the Fabric ports on the back of the FX2 Enclosure.

    You also have the option to install a pass-thru in any of these mezzanine slots.

    Image of the Mezzanine Cards that connect the Fc830 to the Fabrics Ports in the FX2 Enclosure
    Storage Controllers | SAS Expander

    Both the storage controller and expander use the same slot. These two cards can't be installed together. The Expander is only used when installing the 16x 1.8" Backplane.

    Image of the Storage Controller of the Dell FC830 Blade Server Storage Controller

    • miniPERC H330
    • miniPERC H730
    • miniPERC H730p

    Image of the SAS Expander in the Dell FC830 Blade Server SAS Expander

    The SAS Expander is used for the 1.8" Chassis and connects SSDs populated in bays 0-7 to the system board through an expander card.

    Heat Sinks, Dimensions & Weight
    Heat Sink

    If you are using a 1.8-inch hard drive/SSD system with four processors, ensure that you use only 74 mm wide heat sinks for processors up to 105 W, 120 W, or 135 W.


    If you are using a 2.5-inch hard drive/SSD system with four processors, ensure that you use only 94 mm wide heat sinks for processors up to 120 W or 135 W.


    When using a 94 mm wide heat sink for quad processors, the memorymodule sockets A10, A12, B10, B12, C10, C12, D10, and D12 are not available for population.


    Dimensions & Weight
    • Width: 427.6mm (16.83")
    • Height: 40.3mm (1.58")
    • Depth: 538.1mm (21.18")
    • Weight: 13.0 kg (28.66 lb)

    Looking to Customize?

    Need assistance with customization? Our sales experts will help you choose the best setup for your needs.

    Start Customizing Today!

    Product Specs

    Shipping Information

    Express Computer Systems can ship to virtually any address in the world and provides you with the best shipping rates possible. Cost of shipping varies depending on what service you require, your destination and size of the shipment. Shipping costs will be calculated separately from your order and billed to you post purchase. In the notes section of your order please provide us with your preferred shipping method and we will get back to you.

    Custom configured orders ship within 2 business days after all required products are in stock.

    Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine, California.

    Domestic Shipments
    • Standard Ground
      • Shipping time: 2-7 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-10 business days
      • Excludes weekends, holidays or weather delays.
    • 3 Business Days
      • Shipping time: 3 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 3-6 business days
      • Excludes weekends, holidays or weather delays.
    • 2 Business Days
      • Shipping time: 2 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-5 business days
      • Excludes weekends, holidays or weather delays.
    • Overnight / Next Business Day
      • Shipping time: 1 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 1-4 business days
      • Excludes weekends, holidays or weather delays.
    International Shipments
    • International Economy
      • Shipping time: 4-6 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 5-9 business days
      • Excludes weekends, holidays or weather delays.
    • International Priority
      • Shipping time: 1-3 business days
      • Order processing time: 0-3 business days
      • Delivery time after order is placed: 2-6 business days
      • Excludes weekends, holidays or weather delays.

    For more information on shipping view our Shipping Information page or send us a message

    Subscribe