-PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
-SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.
Multi-Quantity Discounts Available for ALL Line Items
** LARGE DISCOUNTS available for complete systems. Pricing displayed is for single item purchases **
Use the configuration tool to create your solution and submit it us for a quote OR send us a message with your complete build requirements to receive best pricing
READ ME
Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
“Submit for Quote” items can be added to your cart and sent to us via the cart page
Click the blue bar to close/open a section from view after choosing your options
HPE Chassis
Network Choice (NC) No Embedded LOM
AMD EYPC 2nd Generation Mixing of 2 different processor models is NOT allowed. Processors with greater than 180W will ship with the High-Performance heatsink. Processors with greater than 180W will require the Max Performance fan kit.
AMD 2nd Gen
Supports up to (2) processors
Bezel and Blanks and more (Optional)
Cable Kit (Optional)
Many upgrades come with the cable kits. For more details please read the QuickSpec Manual below.
HPE Memory
Mixing of x4 & x8, or LRDIMM and RDIMM memory is not allowed Supports up to 32 DIMMS on a 2-socket configuration
Drive Options For LFF Chassis (Optional)
P14507-B21 - For 8LFF Chassis only P14506-B21 is not supported on the 8LFF Chassis
Drive Options For SFF Chassis (Optional)
The following are only supported on the 8SFF Chassis 873763-B21, 826689-B21, P14609-B21, P14578-B21, 826691-B21
HPE LFF Drives SAS (3.5in) (Optional)
Supports up to (8 or 12) Drives
HPE LFF Drives SATA (3.5in) (Optional)
Supports up to (8 or 12) Drives
HPE SFF Drives SAS (2.5in) (Optional)
Supports up to (8, 16, or 24) Drives
HPE SFF Drives SATA (2.5in) (Optional)
Supports up to (8, 16, or 24) Drives
HPE SFF Drives NVMe (Optional)
If you plan to load a lot of NVMe drives, please read about the NVMe Bundle in the Spec Manual below.
Balanced Kits (Optional)
To view all the parts in each Kit. Please view the items. Please view the Maintenance Manual for all the cabling and details of the Kits.
PCI Riser Options (Optional)
Please read the Spec Manual below for more details on each riser.
M.2 Drives (Optional)
SATA M.2 cannot be supported in LFF\/SFF chassis with mid tray configuration due to thermal concern NS204i-p will only be supported in Slot 1 of the primary riser and Slot 8 of the tertiary riser. HPE Universal SATA AIC HHHL M.2 SSD Kit (878783-B21) and NS204i-p cannot be selected together When NS204i-p and doublewide GPU are selected together Secondary Riser MUST be selected and doublewide GPU can be maximum of 2
Cooling (Optional)
There are many items the require extra Cooling. Please view each product or read the Quickspec manual for more detail.
Networking Adapters (Optional)
A Network Adapter, or OCP, or InfiniBand Adapters is required since these system boards do not come with an ebeddedLOM
Open Compute Project (OCP) 3.0 (Optional)
A Network Adapter, or OCP, or InfiniBand Adapters is required since these system boards do not come with an ebeddedLOM Some Cards Need x16 Lanes, by default the OCP has x8 Lanes. Please install the Enablement Kit (P14603-B21) for the Extra Lanes
InfiniBand (Optional)
A Network Adapter, or OCP, or InfiniBand Adapters is required since these system boards do not come with an ebeddedLOM
Host Bus Adapters (HBAs) (Optional)
Storage Controller (Optional)
12GB Sas Expander, NVMe Adapters, Smart Array Controllers If you install a Performance Smart Array Controller you will need the 96W Storage Battery. This sever supports Type-A Array RAID on Chip (AROC) cards which do not take up a PCI slot.
GPU (Optional)
All GPUs need a Riser installed, and a Upgraded Fan kit Please view the description or the spec manual for more details.
Optical Drives (Optional)
With the SFF Chassis, you must install the Universal Media Bay for the Optical Disk Drive.
Boot Devices (Optional)
iLO Server Management (Optional)
HPE iLO with Intelligent Provisioning (standard)
Rail Kit (Optional)
Power Supply Unit (PSU)
Mixing of 2 different power supplies is NOT allowed.
Select Warranty
Helpful Tip: Once desired configuration is selected click "Add to Cart". From the cart page you can submit a submit a quote request for best pricing
Refurbished HPE DL385 Gen10 Plus Configure to Order Server
Building on HPE ProLiant as the intelligent foundation for hybrid cloud, the refurbished HPE ProLiant DL385 Gen10 Plus server offers the 2nd generation AMD® EPYC™ 7000 Series processor delivering up to 2X [1] the performance of the prior generation. With up to 128 cores (per 2-socket configuration), 32 DIMMs for memory up to 3200 MHz, the HPE ProLiant DL385 Gen10 Plus server delivers low cost virtual machines (VMs) with unprecedented security. Equipped with PCIe Gen4 capabilities, HPE ProLiant DL385 Gen10 Plus offers improved data transfer rates and higher networking speeds.
Combined with a better balance of processor cores, memory and I/O makes the HPE ProLiant DL385 Gen10 Plus the ideal choice for virtualization, and memory-intensive and HPC workloads.
What’s New for DL385 Gen10 Plus
Powered by the 2nd generation AMD® EPYC™ 7000 Series processor with double [2] the core density compared to the previous generation.
Higher bandwidth and improved data transfer rates with PCIe Gen4 capabilities.
Faster application performance with increased memory speeds up to 3200 MT/s.
HPE InfoSight provides a cloud-based analytics tool that predicts and prevents problems before your business is impacted.
Flexible Design
The HPE ProLiant DL385 Gen10 Plus server has an adaptable chassis, including the modular drive bays that can be configured with up to 28 SFF, up to 20 LFF, or up to 16 NVMe drive options
The redesigned HPE Smart Array Essential and Performance RAID Controllers offer performance and flexibility for additional features including the ability to operate in both SAS and HBA mode.
Choice of OCP 3.0 or PCIe standup adapters which offers a choice of networking bandwidth and fabric, making it scalable for changing business needs.
The HPE ProLiant DL385 Gen10 Plus supports a wide range of operating systems, making it suitable for most environments.
Know your Server - CTO Configuration Support
Need help with the configuration? Contact us today!
Choice of HPE modular Smart Array and PCIe plug-in controller
PCIe
Three standard in primary riser, upto Eight slots with 2 processors
Drive Cage - included
8 LFF
12 LFF
8 SFF
24 SFF
Network Controller
Choice of OCP or stand up card
Fans
4-Standard
6-Performance
6-Standard
6-Performance
Management
HPE iLO with Intelligent Provisioning (standard), iLO Advanced and OneView (optional)
USB
1x 3.0 standard plus iLo front service port
1x 3.0 standard plus iLo front service port
1x 3.0 standard plus iLo front service port
1x 3.0 standard plus iLo front service port
HPE DL385 Gen10 Base Knowledge. The HPE DL385 Gen10 Plus Rack Server is very similar to the DL385 Gen10 Rack Server. This system only supports the AMD EYPC Gen2 7000 Series. The HPE Rack server can support up to 2 Processors, mixing of processors is not allowed. This powerful 2U 2P Rack server supports 32 DDR4 DIMM on a 2-socket configuration. Mixing of x4 & x8 memory is not allowed. The Dl385 Gen10 Plus has 3 PCIe Risers for a total of 8 PCIe slots to use, which allows you to easily configure this server to your needs.
This Rack server has many storage upgrades for each chassis with limitations on some. The DL385 Gen10 Plus can support an extra front drive in the Media Bay slot, Internal drives that sit above the CPU and DIMMs, and finally rear drives that sit in the PCIe riser cages. We will go over the limitations here, for a full detailed understanding of all the limitations and requirements I suggest you read the spec manual below.
These servers do not come with an embeddedLOM, so the Choice of OCP or stand-up card is mandatory for network capabilities.
8 SFF with optional Universal Media Bay, and optional SFF or NVMe drive bay options
24 SFF with 8 SFF mid-tray drives and 6 SFF rear drive bay options to a total of 38 SFF drives.
8 LFF with Universal Media Bay and optional SFF or NVMe drive bay options
12 LFF with optional 4 LFF mid-plane and optional 4 LFF to total 20 LFF drives.
8 LFF CHASSIS The 8LFF Chassis ship with 6 Standard fans included a Universal Media Bay with blanks spots for 2 SFF and 1 ODD. The 8LFF Chassis can not be upgraded to the 12LFF Front drive configuration. But the 8LFF can support the Internal 4LFF drive cage and the rear 4LFF drive cages. When you install the 4LFF Rear drive cage. This will take up the Primary and Secondary PCIe Riser slots. The 8LFF DL385 Gen10 Chassis can also support the 2 SFF rear drive box which allows for the user to attach a secondary or tertiary riser.
12 LFF CHASSIS The 12 LFF Servers ship with 6 Max performance fans and has no front drive upgrades nor can they support the Universal Media Bay. This 12LFF Chassis does support the 4LFF drive cage and the rear 4LFF drive cages. When you install the 4LFF Rear drive cage. This will take up the Primary and Secondary PCIe Riser slots. The 8LFF DL385 Gen10 Chassis can also support the 2 SFF rear drive box which allows for the user to attach a secondary or tertiary riser.
8SFF Chassis The 8SFF Chassis has the most upgrade features. It can go from 8SFF to 24SFF, from SAS/SATA to NVMe drive interface types. In the 8SFF Box 1, is the only slot where the Universal Media Bay can be installed which can hold 1 ODD and 2 SFF drives. Box 1 can also be installed with 8 SFF Drives to complete the 24SFF Configuration. If you do not plan to use any NVMe drives HPE recommends you select the 24SFF Chassis instead of upgrading the 8SFF. There are Internal drive options for the SFF chassis with the 8SFF Internal drive cage. Another option for storage upgrades is the rear drive option. This 8SFF Chassis can support up to 6 Rear drives each on a Stackable 2SFF Drive cage. 24SFF Chassis The 24SFF Chassis has no front drive upgrade options but does have internal and rear drive options. There is an 8SFF Internal drive cage along with a 2SFF rear-drive option. This 24SFF Chassis can support up to 6 Rear drives each on a Stackable 2SFF Drive cage.
HPE DL385 Gen10 Plus Maximum Internal Storage
Hot Plug SFF SAS 2TB 24+4 x 2.4 TB* (with optional rear SFF drive cage)
Hot Plug SFF SATA 0 TB 24+4 x 2 TB (with optional rear SFF drive cage)
Hot Plug LFF SAS 6 TB 12+4+4 x 14 TB + 2 x 15.3 TB (with optional mid–tray and rear LFF drive cage, plus 2 SFF SSD rear)
Hot Plug LFF SATA 6 TB 12+4+4 x 14 TB + 2 x 15.3 TB (with optional mid–tray and rear LFF drive cage, plus 2 SFF SSD rear)
Hot Plug SFF SAS SSD 4 TB 24+4 x 15.3 TB (with optional rear SFF drive cage)
Hot Plug LFF SATA SSD 8 TB 12+4+4 x 0.96 TB + 2 x 15.3 TB (with optional mid-tray and rear LFF drive cage, plus 2 SFF SSD rear)
Hot Plug SFF SATA SSD 215 TB 24+4 x 7.68 TB (with optional 2SFF drive cage)
Hot Plug SFF NVMe PCIe SSD 368.64TB NVMe 24 x 15.36TB NVMe
Chassis Configurations
Chassis Storage Upgrades - Click to Open
CTO Server
8 SFF
24 SFF
8 LFF
12 LFF
Included Drive Cage
8 SFF SAS/SATA
3X 8 SFF SAS/SATA
8 LFF + UMB
12 LFF Chassis
Universal Media Bay
1 Optional
Not available
1 Included
Not available
ODD
1 Optional with UMB
Not available
1 Optional
Not available
8 SFF Drive Cage
Up to 2 Optional
Not available
Not available
Not available
8 SFF SAS/SATA/NVMe (Mid- plane)
Not available
Not available
Not available
Not available
8 NVMe/SAS Bay
Up to 2 Optional
Not available
Not available
Not available
8 NVMe Cage
Up to 2 Optional
Not available
Not available
Not available
2 SFF SAS/SATA (Front)
1 Optional with UMB
Not available
1 Optional
Not available
2 SFF SAS/SATA (Rear)
1 Optional
1 Optional
1 Optional
1 Optional
2 NVMe (FRONT)
1 Optional with UMB
Not available
1 Optional
Not available
4 LFF Mid-plane
Not available
Not available
1 Optional
1 Optional
4 LFF Rear
Not available
Not available
1 Optional
1 Optional
HPE Smart Storage Controllers The DL385 Gen10 Plus server has the support for a Type-A Array RAID on Chip (AROC) Smart Array also known as Flexible Storage Controllers. By Installing an AROC Card you will be saving a PCIe slot. The AROC spot on the system board also supports NVME drives with the AROC NVMe Adapter. The DL385 Gen10 Plus server also supports Smart Array PCI Stand-up Cards. If you want to install 24 drives, you will need the 12Gb SAS Expander that sits on the Primary Riser in Slot 3.
HPE DL385 Gen10 Plus Boot Drives. You have the ability to load the OS from two different boot devices. The HPE NS204i-p x2 Lanes NVMe PCIe3 x8 OS Boot Device (P12965-B21) or with a simple USB drive (P21868-B21). NS204i-p will only be supported in Slot 1 of the primary riser and Slot 8 of the tertiary riser. HPE Universal SATA AIC HHHL M.2 SSD Kit (878783-B21) and NS204i-p cannot be selected together. When NS204i-p and doublewide GPU are selected together Secondary Riser MUST be selected and the doublewide GPU can be a maximum of 2. SATA M.2 cannot be supported in LFF/SFF chassis with mid-tray configuration due to thermal concern
HPE DL385 Gen10 Plus PCI Risers There are way too many PCIe risers to talk about each one. Below is a table showing you some information. To view more information about each riser, please click the view item button for all the limitations and requirements for each riser. If you want a detailed description of each riser please read the spec manual at the bottom of the page.
GPU Information - Click to Open
Part Number
Description
Riser Position
Bus Width (Gen3 Lanes)
NVMe Direct Connect
Primary
Secondary
Tertiary
Top Slot
Middle Slot
Bottom Slot
Ports
Drive Count
N/A
This is the default riser in the chassis
D
N
N
x8
x16
x8
-
-
P14587-B21
HPE DL38X Gen10 Plus x8/x16/x8 Secondary Riser Kit
N
O
N
x8
x16
x8
-
-
P14592-B21
HPE DL38X Gen10 Plus x16x16 Slot1/2 Riser FIO Kit
O
N
N
x16
x16
0
-
-
P14589-B21
HPE DL38X Gen10 Plus x16/x16 Slot1/2 Secondary Riser Kit
HPE DL38X Gen10 Plus 2LFF Primary/Secondary Riser Kit
O
O
N
0
0
0
-
-
P25903-B21
HPE DL38X Gen10 Plus 2LFF Secondary Riser Kit
N
O
N
0
0
0
-
-
P14580-B21
HPE DL38X Gen10 Plus 2LFF Tertiary Riser Kit
N
N
O
0
0
0
-
-
HPE DL385 Gen10 Plus GPU / Workload Accelerator GPUs and Workload Accelerators will greatly speed up the computing speed for HPC or virtualization. The GPUs and Mid-tray drives can’t be installed together. You will also need to make sure you have the correct Riser installed to support the GPU along with any other requirements for the specific GPUs you install. When NS204i-p and doublewide GPU are selected together Secondary Riser MUST be selected and doublewide GPU can be a maximum of 2
Riser Information - Click to Open
Part Number
Card
QTY Per Server
CPU Supported
R0W29C
HPE NVIDIA Tesla T4 16GB Computational Accelerator
8
240W or below
R4D73C
NVIDIA Tesla V100S 32GB Computational Accelerator
3
R1F95C
HPE NVIDIA Quadro RTX 4000 Graphics Accelerator
6
R0Z45C
HPE NVIDIA Quadro RTX 6000 Graphics Accelerator
3
R1F97C
HPE NVIDIA Quadro RTX 8000 Graphics Accelerator
3
R6B53C
NVIDIA A100 40GB GPU Module for HPE
3
R4B02C
Xilinx Alveo U50 Accelerator for HPE
8
R4B03C
Xilinx Alveo U250 Accelerator for HPE
3
Networking Abilities | OCP 3.0, Stand-up card Without an embeddedLOM on the system board, the HPE DL385 Gen10 Plus needs either an OCP 3.0 or a Stand-Up Network Adapter card installed for Network Capabilities. By installing the OCP 3.0 you will be saving a PCIe slot without any issues or limitations. If the OCP 3.0 card installed needs x16 lanes to support, please install the cable (P14318-001) to connect to CPU1 to upgrade and configure to one x16 OCP NIC. This rack server supports InfiniBand Adapters up 1P 200GB connectors.
HPE DL385 Gen10 Plus Cooling With a ton of options, there are multiple reasons for the system to need to be cooled. 12 LFF or more drives require a Max performance fan kit (P14608-B21). If a CPU power is >180W then it is required to use a 2U Performance Heat sink. A max performance fan kit is required for rear drives or NVMe SFF configurations. SATA M.2 cannot be supported in LFF/SFF chassis with mid-tray configuration due to thermal concerns. If you have any concerns as to what devices have certain requirements. View the product for notes or read the spec manual below.
HPE DL385 Gen10 Plus Flex Slot your power! All power supplies in a server should match. Mixing Power Supplies is not supported. HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Plus Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
More Info The DL38X servers have these NVMe Balanced Support Bundles. What these bundles do is provide all the parts and cabling specs for an NVMe configuration. All the parts for each bundle are in the CTO which can be configured and set up for you. If you would like to know more about the Balanced NVMe Support Bundles please read the spec manual. The cabling of the Bundles is on the last pages of the PDF.
If you have any questions or concerns, please contact us for support.
HPE DL385 Gen10 Plus Lights Out! iLO HPE iLO 5 ASIC HPE Integrated Lights-Out (HPE iLO) - Monitor your servers for ongoing management, service alerting, reporting, and remote management with HPE iLO. UEFI - Configure and boot your servers securely with industry-standard Unified Extensible Firmware Interface (UEFI). RESTful API - iLO RESTful API is Redfish API conformance and offers simplified server management automation such as configuration and maintenance tasks based on modern industry standards.. Intelligent Provisioning – Hassle-free server and OS provisioning for 1 or few servers with Intelligent Provisioning.
64 or 32 or 24 or 16 or 8, per processor, depending on model
Processor speed
3.4 GHz, maximum depending on processor
Processor cache
256 MB or 192 MB or 128 MB L3, per processor , depending on model
Power supply type
2 Flexible Slot power supplies, maximum depending on model
Expansion slots
8 maximum, for detailed descriptions reference the QuickSpecs
Maximum memory
4.0 TB with 128 GB DDR4
Memory, standard
4 TB with 32 x 128 GB RDIMMs
Memory slots
32 DIMM slots
Memory type
HPE DDR4 SmartMemory
Memory protection features
ECC
System fan features
Hot-plug redundant fans, standard
Network controller
Choice of optional FlexibleLOM plus standup, depending on model
Storage controller
1 HPE Smart Array P408i-a and/or 1 HPE Smart Array P816i-a and/or 1 HPE Smart Array E208i-a (depending on model) etc, for more details reference QuickSpecs
Product Dimensions (imperial)
3.44 x 17.54 x 29.5 in
Weight
33.25 lb
Infrastructure management
HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard (requires download) HPE iLO Advanced, HPE iLO Advanced Premium Security Edition and HPE OneView Advanced (require licenses)
Drive supported
8 or 12 LFF SAS/SATA/SSD with 4 LFF rear drive optional and and 2 SFF rear drive optional 8 or 24 SFF SAS/SATA/SSD with 4 SFF rear drive optional, 16 SFF NVMe Front bay
Shipping Information
Express Computer Systems can ship to virtually any address in the world and provides you with the best
shipping rates possible. Cost of shipping varies depending on what service you require, your destination
and size of the shipment. Shipping costs will be calculated separately from your order and billed to you
post purchase. In the notes section of your order please provide us with your preferred shipping method
and we will get back to you.
Custom configured orders ship within 2 business days after all required products are in stock.
Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine,
California.
Domestic Shipments
Standard Ground
Shipping time: 2-7 business days
Order processing time: 0-3 business days
Delivery time after order is placed: 2-10 business days
Excludes weekends, holidays or weather delays.
3 Business Days
Shipping time: 3 business days
Order processing time: 0-3 business days
Delivery time after order is placed: 3-6 business days
Excludes weekends, holidays or weather delays.
2 Business Days
Shipping time: 2 business days
Order processing time: 0-3 business days
Delivery time after order is placed: 2-5 business days
Excludes weekends, holidays or weather delays.
Overnight / Next Business Day
Shipping time: 1 business days
Order processing time: 0-3 business days
Delivery time after order is placed: 1-4 business days
Excludes weekends, holidays or weather delays.
International Shipments
International Economy
Shipping time: 4-6 business days
Order processing time: 0-3 business days
Delivery time after order is placed: 5-9 business days
Excludes weekends, holidays or weather delays.
International Priority
Shipping time: 1-3 business days
Order processing time: 0-3 business days
Delivery time after order is placed: 2-6 business days
Express Computer Systems (ECS) provides a 1 year parts warranty against defects in material or
workmanship that will affect the products functionality. All refurbished items are tested prior to
shipping to guarantee up-time upon arrival. If you are having issues with an item we provided
please Contact Us and we will do our best to assist you.
What does our ECS warranty cover? We offer 1 year warranty as standard and additional
years can be added to fit your needs. Please reach out to a sales associate via the Contact Us page or live chat for more
information on extended coverage options. During the coverage period if your product fails we
will offer a Next Business Day replacement. If we are unable to replace the product we will
refund its original selling price. Shipping costs and tax are not refundable. Express Computer
Systems retains the right to decide whether the goods will be replaced or
refunded.
What is not covered by our warranty? Our warranty does not cover any problem caused
by the following conditions:
accidents; misuse; carelessness; electrostatic discharge; shock; temperature or humidity beyond
the specifications of the product; improper installation; operation; modification;
any improper use that contravenes the instructions in the user manual;
problems caused by other equipment. Our warranty is void if the product is returned with
damaged, removed, counterfeit labels, or any modifications (including any component or external
cover removal). Our warranties do not cover data loss or damages to any other equipment. In
addition, our warranties do not cover incidental damages, consequential damages, or costs
related to data recovery, removal, and installation.
Important notes:
Please ask for additional warranty/coverage that you may require in addition to the standard 1
ECS warranty prior to final purchase. Requesting additional warranty after your purchase can be
denied.
FREE technical support is provided on purchased items via phone, email, or live chat.
About Express Computer Systems
Express Computer Systems is committed to transforming our customers’ IT infrastructure with high quality
products at affordable costs. Our sales reps and customer support engineers understand our customers
rely heavily on advanced technology to run their business but need to do so without breaking the bank.
We specialize in building custom server configurations, custom storage solutions, networking solutions,
and components from top manufacturers including HPE, Dell, Cisco, NetApp, Dell EMC, HPE Nimble and many
others.
Same-Day Shipping
At Express Computer Systems, we know hardware emergencies can happen at anytime. We also
understand that you want to receive the best hardware as quickly as possible. At Express
Computer Systems we'll ship the majority of our orders out the same day payment is made. Curious
if the item you need will make it out on time? Feel free to contact us directly via the Contact
Us link at the bottom, Live Chat feature or (800) 327-0730.
Buy, Sell, Rent, Lease, Trade-In
At Express Computer Systems we not only will sell you equipment at a great value, but we'll also
purchase your used Dell, Cisco, NetApp or other networking equipment. Feel free to contact us
with the model of the items you're looking to sell and we'll get you a quote ASAP. We also have
flexible financing options for your purchasing needs.
In-House Configuration and Testing Lab
Every item we sell is tested on-site in our state-of-the-art hardware engineering lab. We use
certified technicians to test every piece of equipment as well as updating all necessary
firmware. The highest quality of testing and certification is guaranteed. We warranty all of our
items we sell. Ask us today about warranty for a specific item.