HPE Sr100I (G10) Plus FIO Software RAID | P28417-B21

Quick Specs

− Requires UEFI, not supported on Legacy Mode.
− Maximum of 2 NVMe SSDs, which must be connected to NVMe ports embedded on system board.
− Supports Microsoft Windows Server only.

− The Legacy Mode Setting and HPE SR100i Gen10 Plus FIO SW CAN NOT be selected together.
− NVMe Trigger and SR100i (P28417-B21) cannot be selected together.
− SR100i (P28417-B21) and VROC SKUs (R7J57A/ R7J58A) CAN NOT be selected together.
− SR100i can support max 2 NVMe drives. To enable 2NVMe support with SR100i below conditions must be met:
o Tertiary 2port Slimline Riser (P27093-B21) OR AROC to NVMe adapter (P14602-B21) must be selected
o Or 2SFF x4Tri-Mode U.3 Kit (P26922-B21) OR 2SFF x4Tmode SbS U.3 Kit (P26924-B21) must be selected
− If NVMe support is enabled on SR100i then below NVMe drives cannot be selected. However if there are any U.3 cage or U.2 NVMe Drive cage which are enabled to have NVMe drives then below drives can be selected however quantities to be restricted only to these drive cages
− CM6 in drive description
− CD6 in drive description
− P4xxx in drive description