HPE Nvidia Tesla A2 16GB PCI-e 4.0 x8 60W SW FH/HL GPU (P51434-001) | R9H23C

The NVIDIA A2 Tensor Core GPU provides entry-level inference with low power, a small footprint, and high performance for NVIDIA AI at the edge. Featuring a low-profile PCIe Gen4 card and a low 40-60W configurable thermal design power (TDP) capability, the A2 brings versatile inference acceleration to any server for deployment at scale.

• Model: A2
• GPU Memory: 16 GB GDDR6
• Memory ECC: Y
• Memory Bandwidth: 200 GB/sec
• Max Power Consumption: 60W
• Graphic Bus / System Interface: PCIe Gen4x8
• Interconnect Bandwidth: 32 GB/sec (PCIe 4.0)
• Slot Width: SW
• GPU Height / Length: FHHL
• Auxiliary Cable: N/A
• Workload: Inferencing/Edge/VDI

− Requires HPE DL38X Gen10+ PRI/SEC w/o Retainer Kit (P38771-B21)
− Requires HPE DL38X Gen10+ Ter w/o Retainer Kit (P38774-B21) if tertiary riser is selected
− This option requires the High Performance Fan Kit (P14608-B21) to be selected.
− This option requires the High Performance Heat sink (P27095-B21)
− System memory should be 2x GPU memory.
− Max of 8 NVMe drives allowed with this GPU, all NVMe drives must be under 11W
− This GPU and SAS4 drives cannot be selected together.
− This GPU and 40Gb or above Networking/InfiniBand/Smart IO adapters cannot be selected together.
− If NVMe Drive is selected with this Graphics Option then it can be populated in front cage only. Please consider this limitation while selecting Drives and Drive Cage.
− This Graphics option and SAS4 Drives cannot be selected together
− Graphics Option and 100Gb or above PCIe Networking/ Infiniband/ Smart IO (HW) Cards cannot be selected together.

− Can support the GPU adapter with Max. length up to 9.5" (full length adapters are not supported) at PCIe Slot 1 and Slot 3. There is mechanical interference from the GPU bracket when installing A2 at Slot2.
− Nvidia GPU A2 will be available in all 3 slots (incl. Slot 2) expected in Q4 2023 with new low-profile bracket in the A2 kit.
− Requires high performance fans
− Can be installed at Slot 1 and Slot 3 (if 2 nd processor is selected).
− Max 2x350W CPU, 32x128GB DIMM, and max 10SFF, will need to operated at 20C. Will not be a feasible configuration to support.
− In 8SFF CTO Model, if the Graphics Option is selected with the Processor that is more than 270W, then Maximum of 8
NVMe/ SAS/ SATA drives can be selected.
− In EDSFF CTO Model, if the Graphics Option is selected with Processor Wattage is more than 270W, then DLC Module
must be selected.