Chipset | Intel C621 series chipset |
Synergy management 2 | HPE composer powered by OneView |
On compute management chipset 3 | HPE iLO 5 ASIC |
Memory 4, 5, 6, 7 | HPE Registered Dual in-line Memory Module (RDIMMs) and Load-Reduction Dual in-line Memory Module (LRDIMMs) Two to Forty-Eight (48) of the following depending on model. The following memory supports Intel xeon scalable processor family 2nd generation: HPE 8GB (1 x 8GB) single rank x8 DDR4-2933 CAS-21-21-21 registered memory kit HPE 16GB (1 x16GB) single rank x4 DDR4-2933 CAS-21-21-21 registered memory kit HPE 16GB (1 x 16GB) dual rank x8 DDR4-2933 CAS-21-21-21 registered memory kit HPE 32GB (1 x 32GB) dual rank x4 DDR4-2933 CAS-21-21-21 registered memory kit HPE 64GB (1 x 64GB) dual rank x4 DDR4-2933 CAS-21-21-21 RDIMM memory kit HPE 64GB (1 x 64GB) quad rank x4 DDR4-2933 CAS-21-21-21 LRDIMM memory kit HPE 128GB (1 x 128GB) octal rank x4 DDR4-2933 CAS-24-21-21 LRDIMM memory kit
Type | HPE DDR4 SmartMemory, Registered (RDIMM), Load Reduced (LRDIMM) |
---|
Dual In-line Memory Module (DIMM) slots available | 48 | 12 DIMM slots per processor, 6 channels per processor, 2 DIMMs per channel | Maximum capacity (LRDIMM) | 6TB | 48 x 128GB LRDIMM - 2666 MT/s (Check on availability of 128GB DIMMs before ordering) | Maximum capacity (RDIMM) | 3TB | 48 x 64GB RDIMM - 2666 MT/s |
|
The following memory supports Intel xeon scalable processor family 1st generation: HPE 8GB (1 x 8GB) single rank x8 DDR4-2666 CAS-19-19-19 registered memory kit. HPE 16GB (1 x 16GB) single rank x4 DDR4-2666 CAS-19-19-19 registered memory kit. HPE 16GB (1 x 16GB) dual rank x8 DDR4-2666 CAS-19-19-19 registered memory kit. HPE 32GB (1 x 32GB) dual rank x4 DDR4-2666 CAS-19-19-19 registered memory kit. HPE 64GB (1 x 64GB) quad rank x4 DDR4-2666 CAS-19-19-19 LRDIMM memory kit. HPE 128GB (1 x 128GB) octal rank x4 DDR4-2666 CAS-22-19-19 LRDIMM memory kit.
|
Type | HPE DDR4 SmartMemory, Registered (RDIMM), Load Reduced (LRDIMM) |
---|
DIMM slots available | 48 | 12 DIMM slots per processor, 6 channels per processor, 2 DIMMs per channel | Maximum capacity (LRDIMM) | 6TB | 48 x 128GB LRDIMM - 2666 MT/s (Check on availability of 128GB DIMMs before ordering) | Maximum capacity (RDIMM) | 1.5TB | 48 x 32GB RDIMM - 2666 MT/s | Maximum capacity Non-Volatile Dual in-line Memory Module (NVDIMM) | 192GB | 12 x 16GB NVDIMM - 2666 MT/s |
|
Modes of operation | New class of memory which can be configured as either large server memory or fast storage. |
Memory protection 8 | Advanced ECC | Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip. | Online spare | Memory online spare mode detects a rank that is degrading and switches operation to the spare rank. | Online mode | Memory online spare mode (Rank spare mode). |
|
Network adapters 11 | HPE Synergy 3820C 10/20 GbE Converged Network Adapter (CNA) HPE Synergy 2820C 10 GbE CNA HPE Synergy 4820C 10/20/25Gb CNA HPE Synergy 4610C 10/25 GbE adapter HPE Synergy 6810C 25/50 GbE adapter HPE Synergy 6410C 25/50 GbE adapter HPE Synergy 5330C 32G Fibre Channel (FC) Host Bus Adapters (HBA) HPE Synergy 5830C 32G FC HBA HPE Synergy 3530C 16G FC host bus network adapter HPE Synergy 3830C 16G FC host bus network adapter
|
Mezzanine connectors | Six (6) I/O expansion mezzanine connectors: Mezzanine connector 1 is x16 PCIe 3.0 type D (Supports type C and type D mezzanine cards) for fabric 1. Mezzanine connector 2 is x16 PCIe 3.0 type D (Supports type C and type D mezzanine cards) for fabric 2. Mezzanine connector 3 is x16 PCIe 3.0 type C (Supports type C mezzanine cards) for fabric 3. Mezzanine connector 4 is x16 PCIe 3.0 type D (Supports type C and type D mezzanine cards) for fabric 1. Mezzanine connector 5 is x16 PCIe 3.0 type D (Supports type C and type D mezzanine cards) for fabric 2. Mezzanine connector 6 is x16 PCIe 3.0 type C (Supports type C mezzanine cards) for fabric 3.
|
Mezzanine options include | Dual-port 10/20Gb compute module mezzanine adapter options. Dual-port 16Gb FC HBA for SAN connectivity. 2GB storage module smart array mezzanine controller for direct attach storage. Dual-port 25/50 GbE network adapter.
|
HPE compute module Read Only Memory (ROM) | HPE ROM is now digitally signed using the HPE corporate signing service. This signature is verified before the flash process starts, reducing accidental programming and preventing malicious efforts to corrupt system ROM. HPE Synergy compute ROM is used to configure the following: Processor and chipset status registers. System memory, memory map, and memory initialization. System hardware configuration (Integrated PCI devices and optional PCIe cards). End user specific BIOS configuration using the Unified Extensible Firmware Interface (UEFI) system utilities.
|
Storage controllers | Software RAID (Embedded): HPE Smart array S100i software RAID Gen10 (HPE FIO enable smart array SW RAID). Essential RAID controllers: HPE Smart array E208i-c SR Gen10 12G SAS modular controller. Performance RAID controllers: HPE Smart array P408i-c SR Gen10 12G SAS modular controller. HPE Smart array P416ie-m SR Gen10 12G SAS mezzanine controller (Mezzanine hybrid smart array vontroller for use with Synergy D3940 storage modules; up to 4 storage modules per frame with the HPE Synergy 660 Gen10 compute modules). Premium backplane compute module option for use with up to 4 NVMe drives in front drive cage.Also, supports P416ie-m with specific SAS cable connections allowing P416ie-m to manage SATA/SAS drives in both front drive cage and HPE SY D3940 DAS Storage module.
|
Maximum internal storage 9 | Models | Capacity | Configuration |
Hot plug SFF SAS SSD | 61.2TB | 4 x 15.3TB |
Hot plug SFF SATA SSD | 15.36TB | 4 x 3.84TB |
Hot plug SFF SAS HDD | 9.6TB | 4 x 2.4TB |
Hot plug SFF SATA HDD | 8.0TB | 4 x 2.0TB |
Hot plug SFF NVMe SSD | d16.0TB | 8 x 4.0GB |
Hot plug uFF SATA SSD | 2.72TB | 4 x 340GB |
Hot plug internal M.2 | 7.68TB | 4 x 1.92TB |
Interfaces | Micro SDHC slot | One (1) internal micro secure digital high capacity (Micro SDHC) card slot. |
USB 3.0 port | One (1) internal USB 3.0 connector for USB flash media drive keys. |
USB 3.0 port | One (1) external USB 3.0 connector for USB flash media drive keys. |
iLO USB 2.0 port | One (1) external USB 2.0 connector for iLO 5. |
Form factor | HPE Synergy 660 Gen10 is a 10U Full-Height, Single-Wide, compute module that plugs into the HPE Synergy frame 12000. |
Frames | HPE Synergy 12000 frame, is the base for all Synergy products and supports full redundancy in a single frame, while allowing for scalability and redundancy out to many frames (Up to 21 frames supported per single composer/OneView). Up to 12 Half-Height, 6 Full-Height Single-Wide, or 3 Full-Height Double-Wide compute modules (Mixing allowed). Up to 5 Half-Height Double-Wide HPE Synergy D3940 Storage modules (Mixing with compute modules in any to any ratio allowed). One HPE Synergy 12000 frame will support up to six (6) HPE Synergy 660 Gen10 compute modules.
|
Industry standard compliance | Microsoft logo certifications. USB 3.0 compliant; iLO USB is 2.0 compliant. WOL enabled on specific adapters. PXE support enabled. Trusted Platform Module (TPM) 2.0 support (RBSU support of TPM 1.2). IEEE (Specific IEEE standards depending on ethernet adapter card(s) installed). Advanced Encryption Standard (AES). Triple Data Encryption Standard (3DES). SNMP SSL 2.0 DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP). Active directory v1.0 PCIe 3.0 UEFI forum
|
Graphics | Integrated matrox G200eH2 video standard with 16MB of video RAM 1280 x 1024 (32 bp) 1920 x 1200 (16 bp)
HPE iLO 5 on system management memory |
HPE server UEFI/legacy ROM 10 | UEFI is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with users server at boot time. HPE Gen10 servers have a UEFI Class 2 implementation and support both UEFI mode (Default) and legacy BIOS mode. UEFI enables numerous new capabilities specific to HPE Synergy compute modules such as: Secure boot and secure start enable for enhanced security. Operating System (OS) specific functionality. Support for > 2.2TB (Using GPT) boot drives. USB 3.0 stack Embedded UEFI shell Mass configuration deployment tool using iLO RESTful API that is Redfish API conformant. PXE boot support for IPv6 networks. Workload profiles for simple performance optimization.
|
UEFI boot mode only: TPM 2.0 support NVMe boot support Platform Trust Technology (PTT) can be enabled. iSCSI software initiator support. HTTP/HTTPs boot support as a PXE alternative. Boot support for option cards that only support a UEFI option ROM.
|
Embedded management | USB 3.0 Stack |
Security | |
Standard security features Power-On password Administrator's password Keyboard password (QuickLock) HPE iLO management on system management chipset with SSL encryption, secure shell version 2, AES and 3DES on browser, CLP and XML scripting interface, AES and RC4 encryption of video. External USB port enable/disable Network server mode Serial interface control TPM 1.2 or 2.0 option AES Intel Advanced Encryption Standard-New Instructions (AES-NI).
|
NOTE:- For more information regarding Intel Xeon processors please check the below link:
- Read and learn more about OneView from the below link:
Click here to access the page for HPE OneView . - Read and learn more in the iLO QuickSpecs from the below link:
Click here to access the quickspecs page for HPE Integrated Lights-Out (iLO) . - Maximum capacity with LRDIMM will increase to 6TB in 2H201.
- The 128GB LRDIMM, when available, may not be mixed with other DIMM capacities/types.
- LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a compute module.
- HPE memory from previous generation servers (DDR3) is not compatible with this compute module. HPE DDR4 SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen10.
- For details on the HPE Server memory options RAS feature, check the below link:
Click here to access the page for How memory RAS technologies can enhance the uptime of HPE ProLiant servers . - The Synergy 660 Gen10 compute module includes the HPE Hot-Plug SFF SmartDrive carrier for enhanced management and reduced maintenance errors. HPE drives from previous generation servers (Prior to Gen8) are not compatible with the Synergy 660 Gen9 or Gen10 drive bays.
- For UEFI boot mode, boot environment and OS image installations should be configured properly to support UEFI.
- UEFI FIO setting (758959-B22) can be selected to configure the system in legacy mode in the factory for users HPE Synergy Gen10 server.
- Supports full hardware offload of FCoE storage protocol processing for highest performance converged ethernet data and storage networks.
- Delivers flexibility to compose multiple network flows including ethernet and FCoE or iSCSI within each connection.
- Refer to the memory Quickspecs for more details.
|