HPE ProLiant DL360 Gen11 8SFF x1 U.3 Tri-Mode Backplane Kit | P48895-B21
Thanks for the request. We'll get back to you with in 24 hours.
-PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
-SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.
Backplane Specs
Selection with 2SFF Drive cage:- If SR932i-p/ MR416i-p/ MR216i-p is alone selected, then both "HPE DL360 Gen11 8SFF PCIe Cbl Kit" and "HPE DL360 Gen11 2SFF TM Cbl Kit" must be selected.
- If MR416i-o/ MR216i-o is alone selected, then both "HPE DL360 Gen11 OROC TM Cbl Kit" and "HPE DL360 Gen11 2SFF TM Cbl Kit" must be selected.
- If 1 quantity of MR408i-o is alone selected, then "HPE DL360 Gen11 OROC TM Cbl Kit" must be selected.
- If 2 quantity of MR408i-o is selected, then both "HPE DL360 Gen11 OROC TM Cbl Kit" and "HPE DL360 Gen11 2SFF TM Cbl Kit" must be selected.
- If 1 quantity of MR408i-o is alone selected, then "HPE DL360 Gen11 2SFF TM Cbl Kit" cannot be selected.
- If SR932i-p, MR416i-p, MR216i-p, MR416i-o, MR216i-o controller is selected, then max 1 of the internal controllers can be selected per server.
DL360 Gen 11 Notes:
- Supports SATA, SAS and NVMe Basic Carrier (BC) drives.
− NVMe SSDs must be U.3. If 8SFF x1 drive cage is connected to Direct Attach (without internal controller and
8SFF cable), then only SATA drive can be selected in this drive cage.
− No NVMe Direct Attach support.
− Not supported with SR932i-p Tri-Mode controller.
− Supports HPE Gen11 SAS/SATA controller if only SAS/SATA drives are installed
- HPE DL360
(Click to View)