Dell BOSS-N1 Dual M.2 NVMe SSD PCIe Card

Thanks for the request. We'll get back to you with in 24 hours.

Condition: Refurbished ✓ Pulled from working servers & Tested. ✓ 1-year Parts Warranty.

Warranty | Return Policy

Boot Device Specs
BOSS card Drive Size RAID levels Stripe size Virtual disk cache functio n Maximum number of virtual disks Maximum number of drives supported Drive types PCIe support Disk cache policy Support for Non-RAID disks Crypto graphic digital signature to verify firmware payload Hot Plug
BOSS-N1 Monolithic M.2 devices are read-intensive with 480 GB or 960 GB capacity RAID1 and RAID0 Supports default 64K stripe size only None 1 2 M.2 NVMe SSDs Gen3 Drive default No Yes Yes

BOSS-N1 is offered as a means of booting 16G servers to a full OS when the target OS is a full OS (not just a hypervisor), or the user does not wish to trade off standard hot plug drive slots for OS install The HW RAID BOSS-N1 card is a RAID controller with a limited feature set that presents M.2 NVMe-only SSDs as either a RAID0 disk or a single RAID1 volume with 2 disks. BOSS-N1 enables support for 480/960 GB Disks from Factory Install.
Hardware: BOSS-N1 Controller and Carrier (x2) Reliability: Enterprise-Class M.2 NVMe SSDs
Supports dual 80 mm, Read Intensive (1DWPD), M.2 devices 480 GB/960 GB Standard - 1.92 TB QNS
Accessibility: Rear Facing
Serviceability: Full Hot-Plug Support
Supports Hardware RAID1 and RAID0
Supports UEFI boot
Marvell 88NR2241 NVMe RAID Controller
Controlled Firmware Upgrade through iDRAC

Compatible With:
  • Dell Mx760c
  • Dell R660xs
  • Dell XR4000
  • Dell XR5610
  • Dell XR7620
  • Dell XR8000

(Click to View)