Current Configuration
(List below serves as quick links to each section)
Select Chassis
Processors
Select Riser Card 1 (Required)
Select Riser 2
Select DIMMs
Select Memory Mirroring
Select a RAID Controllers
Select Front Facing HDD
Select Front Facing SSD
Select Rear Facing HDD
Select Rear Facing SAS SSD
Select Rear Facing SATA SSD
Select Rear Facing NVMe SSD
Select GPU Card(s)
Select Power Supplies
Select Power Cables
Select Rail Kit
Select Cable Management Arm (CMA)
Select Cisco SD Card Module
Select M.2 SATA SSDs
Select Mini Storage Carrier
Select Trusted Security Module
Select a Internal SD-Micro Module
Select USB 3.0
ECS Warranty
What's New
- (2) Intel Xeon 2nd Gen Scalable Processors
- (24) 2933MT/s DDR4 DIMMs
- Support for Intel® Optane™ Persistent Memory (PMem)
- (12) LFF SATA/SAS Drives
- (2) Rear Drives SAS/SATA/NVMe
- (6) PCIe 3.0 Slots
- (6 SW, 2 DW) GPU Support
- Dedicated mLOM Slot
- Dedicated Cisco 12G SAS Modular RAID controller Slot
- Embedded 2 x 10GBASE-T LAN-on-motherboard (LOM)
- (6) Hot Swap Fans
- Cisco C220 M4 | M5 | M6 | M7
- Cisco C240 M4 | M5 | M6
(Click to View)
Ideal for:
- Artificial Intelligence (AI)
- Big Data Analytics
- Data Analytics
- Database
- Deep Learning (DL)
- High-Performance Computing (HPC)
- Machine Learning (ML)
The UCS C240 M5 LFF server extends the capabilities of Cisco’s Unified Computing System portfolio in a 2U form factor with the addition of the 2nd Generation Intel® Xeon® Scalable Processors, 2933-MHz DDR4 memory, and the new 512GB Intel® Optane™ Persistent Memory (PMem). With this combination of features, up to 9 TB of memory is possible (using 12 x 256 GB DDR4 DIMMs and 12 x 512 GB PMem), up to 6 PCI Express (PCIe) 3.0 slots, and up to 12 front-facing internal LFF drives. The C240 M5 LFF server also includes one dedicated internal slot for a 12G SAS storage controller card.
The C240 M5 server includes a dedicated modular LAN on motherboard (mLOM) slot for installation of a Cisco Virtual Interface Card (VIC) or third-party network interface card (NIC) without consuming a PCI slot, in addition to 2 x 10 Intel x550 10Gbase-T embedded (on the motherboard) LOM ports.
UCSC-C240-M5L
(12) LFF SAS/SATA Drives
Drive Bay 1 & 2 Support NVMe
(2) SAS/SATA/NVMe Rear Drives
View C240 M5 LFF CTO
C240 M5 8x2.5" Chassis UCSC-C240-M5S
(8) SFF Drives
Drive Bay 1 & 2 Support NVMe
DVD drive option
(2) SAS/SATA/NVMe Rear Drives
View C240 M5 SFF CTO
Cisco C-Series C240 M5 24x2.5" Tri ChassisUCSC-C240-M5SN
(1-8) NVMe SSD Only
(9-24) SAS/SATA Drives
(2) NVMe Only Rear Drives
View C240 M5 SFF CTO
Cisco C-Series C240 M5 24x2.5 ChassisUCSC-C240-M5SX
(24) SAS/SATA SFF Drives
Drive Bay 1 & 2 Support NVMe
(2) SAS/SATA/NVMe Rear Drives
View C240 M5 SFF CTO
Drive Bay 1 & 2 w/ NVMe
Must Included:
UCSC-PCI-2C-240M5 (Riser 2C)
CBL-NVME-C240LFF= (C240 M5 Front NVMe cable (1) LFF)
If you order any SFF NVMe drives, you must also order two CPUs.
Rear Drives w/ NVMe
Must Included:
UCSC-PCI-2C-240M5 (Riser 2C) or
UCSC-PCI-2B-240M5 (Riser 2B)
UCSC-RNVME-240M5= (Rear NVMe CBL, backplane SFF&LFF)
If you order any SFF NVMe drives, you must also order two CPUs.
Intel® VROC
Supports with Intel drives (only)
Supports (SFF) drives (nly)
RAID 0/1/5/10 support
NVMe operates in UEFI mode only
-
Hardware RAID
Rear drive bays support SAS or NVMe drives -
Embedded software RAID
Rear drive bays support NVMe drives only
You can mix SAS/SATA hard drives and SAS/SATA SSDs in the same server. However, you cannot configure a logical volume (virtual drive) that contains a mix of hard drives and SSDs. That is, when you create a logical volume, it must contain all SAS/SATA hard drives or all SAS/SATA SSDs.
In a 2U form factor with the addition of the 2nd Generation Intel® Xeon® Scalable Processors, 2933-MHz DDR4 memory, and the new 512GB Intel® Optane™ Persistent Memory (PMem). With this combination of features, up to 9 TB of memory is possible (using 12 x 256 GB DDR4 DIMMs and 12 x 512 GB PMem).
Memory will operate at the maximum speed of the Intel Xeon Scalable processor memory controller, ranging from 2133 MHz to 2933 MHz for M5 servers. Check CPU specifications for supported speeds
The C240 M5 server includes a dedicated modular LAN on motherboard (mLOM) slot for installation of a Cisco Virtual Interface Card (VIC) or third-party network interface card (NIC) without consuming a PCI slot, in addition to 2 x 10 Intel x550 10Gbase-T embedded (on the motherboard) LOM ports.
PCIe Riser 1 required
Riser 1 - UCSC-PCI-1-C240M5
- 3 PCIe slots (x8, x16, x8)
- Slots 1 and 2 controlled with CPU1
- Slot 2 supports DW GPU
- Slot 3 controlled with CPU2
- (1) Micro SD Slot
Riser 1 - UCSC-RIS-1-240M5
- 3 PCIe slots (x8, x16, x8)
- Slots 1 and 2 controlled with CPU1
- Slot 2 supports SW GPU
- Slot 3 controlled with CPU2
- (1) Micro SD Slot
Riser 1B - UCSC-PCI-1B-240M5
- 3 PCIe slots (x8, x8, x8)
- All slots controlled with CPU1
- (1) Micro SD Slot
Riser 1B - UCSC-RIS-1B-240M5
- 3 PCIe slots (x8, x8, x8)
- All slots controlled with CPU1
- Slot 2 supports a SW GPU
- (1) Micro SD Slot
PCIe Riser 2 options (all slots controlled with CPU2)
Riser 2A - UCSC-PCI-2A-240M5
- 3 PCIe slots (x16, x16, x8)
- Supports a DW GPU
Riser 2A - UCSC-RIS-2A-240M5
- 3 PCIe slots (x16, x16, x8)
- Supports a SW GPU
Riser 2B - UCSC-PCI-2B-240M5
- 3 PCIe slots (x8, x16, x8)
- Supports a DW GPU
- +NVMe connectors for two Rear drives
Riser 2B - UCSC-RIS-2B-240M5
- 3 PCIe slots (x8, x16, x8)
- Supports a SW GPU
- +NVMe connectors for two Rear drives
Riser 2C - UCSC-PCI-2C-240M5
- 3 PCIe slots (x8, x8, x8)
- +NVMe connectors for two Front drives
- +NVMe connectors for two Rear drives
Riser 2C - UCSC-RIS-2C-240M5
- 3 PCIe slots (x8, x8, x8)
- +NVMe connectors for two Front drives
- +NVMe connectors for two Rear drives
- Supports SW GPU T4
Riser 2D is shipped only in the NVMe-optimized server version UCSC-C240-M5SN; it is not orderable separately. In the UCSC-C240-M5SN configuration, PCIe slot 4 is dedicated for the NVMe switch card that controls front-loading NVMe drives in front bays 1 - 8.
All GPU cards require two CPUs and a minimum of two power supplies in the server. 1600W power supplies are recommended.
NVIDIA M10 and M60 can support only less than 1TB of total memory in the server.
GPUs cannot be mixed.
Slot 5 on riser card 2 is the required slot for the first GPU
Slot 2 on riser card 1 is the secondary slot for a second GPU
Current Configuration
(List below serves as quick links to each section)



































