Please remove $0 item(s) from cart - or - Request for Quote

Dell Broadcom Single Port 100GbE QSFP56 OCP 3.0 SFF | BCM957504-N1100G

 
Price: Request a Quote

Brand:  
MPN:  
BCM957504-N1100G
Type:  
Adapter
Condition:  
ECS Refurbished & Tested

Request Quote

Note: Please include as much details and relevant options about the item to help us match your request with an accurate price.


-PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
-SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.

Dell Broadcom Single Port 100GbE QSFP56 OCP 3.0 SFF | BCM957504-N1100G

Features

The Broadcom® BCM957504-N1100G is a single-port 100 Gb/s PCI Express 4.0 x16 network adapter designed to the Open Compute Project (OCP) 3.0 Design Specification in small form factor with one QSFP56 network connector. The adapter supports QSFP56/QSFP28/QSFP+ optical modules and copper direct-attach cables. The network adapter uses the Broadcom BCM57504 100GbE MAC controller with an integrated single-channel 100GbE SFI transceiver.

BCM57504 Ethernet Controller

The BCM57504 Ethernet controller is configured as a single-port 100 Gb/s interface to the line side and x16 PCI Expressv4.0 interface to the system host.

PCI Express Interface

PCIe is a high-bandwidth serial bus providing a low pin-count interface as an alternative to parallel PCI. It is part of the hostinterface connector. The BCM57504 complies with the PCI Express Base Specification Revision 4.0, and supports a 16-lanePCIe 4.0 interface via the host interface connector.

NC-SI Interface

The BCM57504 Ethernet controller supports the Network Controller Sideband Interface (NC-SI) Specification version 1.1.0.The NC-SI provides a standardized interface between the system baseboard management controller (BMC) and theintegrated NC-SI module of the BCM57504.

SMBus Interface

The BCM57504 Ethernet Controller SMB0 interface supports serial communications between the BCM57504 and thesystem. The interface allows the Ethernet controller to act as a SMBus host or a client device.

Non-Volatile RAM

The BCM57504 Ethernet controller requires a non-volatile serial flash memory (NVRAM) to store the device firmware, PCIconfiguration space settings (for example, device ID, and vendor ID), MAC address, and so on. After power-up, the firmwareis downloaded into the device memory and executed by the on-chip processor.

Heat Sink

The passive heat sink is attached to the Ethernet controller using four spring-loaded push pins that are inserted into fourmounting holes.

Power Supplies

All power is derived from the network adapter host interface connector 12V and 3.3V supply which feeds the onboardregulators that provide the necessary power to the various components on the network adapter. The network adapter hassix switching voltage regulators that power the adapter’s VDDC_AON, VDDC_HOST, +0.8V, +1.2V, +1.8V, and +3.3V loads.

QSFP56 Connector

The BCM957504-N1100G integrates one QSFP56 connector to support 50G PAM-4 or 25G/10G NRZ signaling for 100/50/40/25/10 Gb/s on the port. QSFP56 is backward compatible with QSFP28 and QSFP+ when appropriate cables andtransceivers are used.

  • Single-port pluggable media interface, which is compatible with a QSFP56/QSFP28/QSFP+ optical transceiver or a copper direct-attach cable.
  • Industry’s most secure PCIe adapter solution leveraging Broadcom’s BroadSAFE® technology
  • Supports Ethernet 50G PAM-4 and 25G/10G NRZ signaling.
  • Multi-Host up to four hosts.
  • Fully compliant with the SFF-8402 standard.
  • x16 PCI Express 4.0 compliant.
  • SR-IOV with up to 1k virtual functions (VFs).
  • Function-Level Reset (FLR) support.
  • TruFlow™ flow processing engine.
  • Virtual Network Termination – VXLAN, NVGRE, Geneve, GRE encap/decap.
  • vSwitch Acceleration.
  • Tunnel-aware stateless offloads.
  • DCB support – PFC, ETS, QCN, DCBx.
  • RDMA over Converged Ethernet (RoCE)
  • Network Controller Sideband Interface (NC-SI).
  • SMBus 2.0.
  • MCTP over SMBus.
  • Jumbo frames up to 9 KB.
  • Advanced congestion avoidance.
  • Multiqueue, NetQueue, and VMQ.
  • IPv4 and IPv6 offloads.
  • TCP, UDP, and IP checksum offloads.
  • Large send offload (LSO).
  • Large receive offload (LRO).
  • TCP segmentation offload (TSO).
  • Receive-side scaling (RSS).
  • Transmit-side scaling (TSS).
  • VLAN insertion/removal.
  • Interrupt coalescing.
  • Network boot—PXE, UEFI.
  • iSCSI boot.
  • Wake-on-LAN (WOL).
  • MSI and MSI-X.
  • OCP 3.0 FRU support.
  • Conforms to the OCP 3.0 Design Specification Version 1.00.

Product Specs

Shipping Information

Express Computer Systems can ship to virtually any address in the world and provides you with the best shipping rates possible. Cost of shipping varies depending on what service you require, your destination and size of the shipment. Shipping costs will be calculated separately from your order and billed to you post purchase. In the notes section of your order please provide us with your preferred shipping method and we will get back to you.

Custom configured orders ship within 2 business days after all required products are in stock.

Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine, California.

Domestic Shipments
  • Standard Ground
    • Shipping time: 2-7 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-10 business days
    • Excludes weekends, holidays or weather delays.
  • 3 Business Days
    • Shipping time: 3 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 3-6 business days
    • Excludes weekends, holidays or weather delays.
  • 2 Business Days
    • Shipping time: 2 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-5 business days
    • Excludes weekends, holidays or weather delays.
  • Overnight / Next Business Day
    • Shipping time: 1 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 1-4 business days
    • Excludes weekends, holidays or weather delays.
International Shipments
  • International Economy
    • Shipping time: 4-6 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 5-9 business days
    • Excludes weekends, holidays or weather delays.
  • International Priority
    • Shipping time: 1-3 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-6 business days
    • Excludes weekends, holidays or weather delays.

For more information on shipping view our Shipping Information page or send us a message

ECS Warranty Information

Express Computer Systems (ECS) provides a 1 year parts warranty against defects in material or workmanship that will affect the products functionality. All refurbished items are tested prior to shipping to guarantee up-time upon arrival. If you are having issues with an item we provided please Contact Us and we will do our best to assist you.

What does our ECS warranty cover?
We offer 1 year warranty as standard and additional years can be added to fit your needs. Please reach out to a sales associate via the Contact Us page or live chat for more information on extended coverage options. During the coverage period if your product fails we will offer a Next Business Day replacement. If we are unable to replace the product we will refund its original selling price. Shipping costs and tax are not refundable. Express Computer Systems retains the right to decide whether the goods will be replaced or refunded.

What is not covered by our warranty?
Our warranty does not cover any problem caused by the following conditions:

  1. accidents; misuse; carelessness; electrostatic discharge; shock; temperature or humidity beyond the specifications of the product; improper installation; operation; modification;
  2. any improper use that contravenes the instructions in the user manual;
  3. problems caused by other equipment. Our warranty is void if the product is returned with damaged, removed, counterfeit labels, or any modifications (including any component or external cover removal). Our warranties do not cover data loss or damages to any other equipment. In addition, our warranties do not cover incidental damages, consequential damages, or costs related to data recovery, removal, and installation.

Important notes:

  • Please ask for additional warranty/coverage that you may require in addition to the standard 1 ECS warranty prior to final purchase. Requesting additional warranty after your purchase can be denied.
  • FREE technical support is provided on purchased items via phone, email, or live chat.

About Express Computer Systems

Express Computer Systems is committed to transforming our customers’ IT infrastructure with high quality products at affordable costs. Our sales reps and customer support engineers understand our customers rely heavily on advanced technology to run their business but need to do so without breaking the bank.

We specialize in building custom server configurations, custom storage solutions, networking solutions, and components from top manufacturers including HPE, Dell, Cisco, NetApp, Dell EMC, HPE Nimble and many others.

Subscribe