Previous
Home / Dell EMC Unity All / Dell EMC Unity 300 Hybrid

Dell EMC Unity 300 Hybrid

Dell

| Server
Contact For Pricing

Thanks for the request. We'll get back to you with in 24 hours.

Condition: Refurbished ✓ Pulled from working servers & Tested. ✓ 1-year Parts Warranty.

Warranty | Return Policy

Quick Specs
  • Form Factor: 2U
  • Max Drives: 5/150
  • Hybrid Storage Max Fast Cache: 800GBs
  • Max. raw capacity (PB): 2.4PB
  • Drives Supported: SAS, NL-SAS and Flash
  • Max DAE: 9
  • RAID Options: 1/0, 5, 6
  • Max Memory: 48GB
  • Supported Back-End I/O modules: None
  • I/O Supported: Support for File, Block (FC, iSCSI & FCoE) and Unified
12-drive DPE:

3.4 inches high x 17.5 inches wide x 27 inches deep (8.64 cm x 44.45 cm x 68.58 cm) 65 lb (29 kg)

25-drive DPE:

3.4 inches high x 17.5 inches wide x 24.17 inches deep (8.64 cm x 44.45 cm x 61.39 cm) 44 lb (20 kg)

Disk Array Enclosure (DAE)

The Dell EMC Unity 300 supports all three types of DAE’s with a max being either 9 DAE’s or 150 drives. When calculating the number of drives make sure to count the DPE drives as well in the total.

  • 2U 25-drive DAE with 2.5-inch drives
  • 3U 15-drive DAE with 3.5-inch drives
  • 3U 80-drive DAE with 2.5-inch drives

All Hybrid Models support 2 Drive Carrier types. The 12x3.5” and the 25x2.5”. Flash models only support the 25x2.5” Drive Carriers. Each unit has 2 Storage Processors (SP’s) in the rear with 2 CNA ports and 2 Module slots that can hold up to 6 different modules.

The Dell EMC Unity hybrid models are the only ones to support FAST and FAST VP technology which helps with tiered storage and accessibility to high-frequency data.

Storage Processor (SP):

The Dell EMC Unity 300 has 2 Storage Processors.

Each SP comes with:
  • Intel Xeon E5-2603 6-Core 1.6 GHz processor.
  • 3 8GB DDR4 DIMM for a total of 24GB of memory
  • 2 embedded CNA ports (4 configurations possible)
  • 2 10GbaseT ports
  • 2 mini-HD SAS ports
  • 2 PCI 3.0, x8 lane I/O module slots (6 Modules supported)
I/O Modules:

Each SP has two slots that can support 6 different options.

  • Four-port 12-Gb/s SAS I/O module
  • Four-port 16-Gb/s Fibre Channel I/O module
  • Four-port 10-Gb/s optical I/O module
  • Four-port 10GBASE-T I/O module
  • Four-port 1GBASE-T I/O module
  • Two-port 10Gb/s optical I/O module

Note: When adding new I/O modules, always install I/O modules in pairs—one module in SP A and one module in SP B. Both SPs must have the same type of I/O modules in the same slots. Please read the manual below for more details to each module listed above.

CNA Ports:

Each SP contains two integrated CNA ports (labeled 4 and 5). These ports are PCI Express 3.0 x4 adapters that provide interfaces that can be configured as Ethernet, or Fibre Channel, but once set to a protocol, cannot be changed. If CNA ports are set to Ethernet, you can use 1Gb/s, 10Gb/s SFPs, Twin-AX for File (IP), or iSCSI Block access. If the ports are set to Fibre Channel, then you can use SFPs supporting 4, 8, 16 Gb/s FC multi-mode, or single-mode SFPs supporting 16Gb/s only.

Note: The four CNA ports cannot be configured independently; they must all be configured with the same network protocol.

Standby Power Supply

12 DPE
  • AC 100 to 240 VAC ± 10%, single phase, 47 to 63 Hz
  • DC Line Voltage -39 to -72 V DC (Nominal -48V or -60V power systems)
25 DPE
  • AC 100 to 240 VAC ± 10%, single phase, 47 to 63 Hz
  • DC Line Voltage -39 to -72 V DC (Nominal -48V or -60V power systems)

Looking to Customize?

Not seeing the exact specs you need?
Start your build today with Express Computer Systems!

Start Customizing Today!