Price: Configure for Price
The HPE ProLiant DL380 Gen11 server is a scalable 2U 2P solution that delivers exceptional compute performance expandability, and scalability for diverse workloads and environments at 1P economics. Powered by 4th Gen Intel® Xeon® Scalable Processors with up to 60 cores, increased memory bandwidth, and high-speed PCIe Gen5 I/O, the HPE ProLiant DL380 Gen11 server is a perfect dual-socket, 2U/2P, scalable solution.
The silicon root of trust anchors the server firmware to an HPE-exclusive ASIC, creating a fingerprint for the Intel® Xeon® Scalable Processor that must be matched exactly before the server will boot.
The DL380 Gen11 CTO Options:
What's new
· Powered by the 4th Generation Intel® Xeon® Scalable Processors with next-generation technology that support up to 60 cores at 350W and 16 DIMMs for DDR5 memory at speeds up to 4800 MHz.
· Support for up to 8 TB total DDR5 memory with 16 DIMM channels per processor delivers increased performance, lower power requirements, and High Bandwidth Memory (HBM) support.
· Support for PCIe Gen5, resulting in improved bandwidth, advanced data transfer rates, and higher network speeds from the PCIe Gen5 serial expansion bus.
· Includes the new HPE Integrated Lights-Out 6 (iLO 6) server management software that enables you to securely configure, monitor, and update your HPE ProLiant Gen11 servers seamlessly, from anywhere.
· Supports hot-pluggable, high-availability RAID M.2 boot options.
· Supports up to 8 single wide (SW) or 3 double wide (DW) GPUs to accelerate graphic intense workloads.
HPE ProLiant DL380 Gen11 12LFF Base Knowledge
Since this Server is so large and has so many configurations, we have broken it up by chassis to make this information a little easier for you to digest.
Chassis
Processor
Max Internal Storage
| Drive | Capacity | Configuration |
|---|---|---|
| Hot Plug SFF SAS HDD | 91.2 TB | 24+8+6 x 2.4TB |
| Hot Plug SFF SAS SSD | 583.3 TB | 24 +8+6 15.35TB |
| Hot Plug SFF SATA HDD | 76 TB | 24+8+6 x 2 TB |
| Hot Plug SFF SATA SSD | 291.84 TB | 24 +8+ 6 x 7.68 TB |
| Hot Plug LFF SAS HDD | 360 TB | 12+4+4x 18 TB (with optional rear LFF drive cage) |
| Hot Plug LFF SATA HDD | 360 TB | 12+4+4 x 18 TB (with optional rear LFF drive cage) |
| Hot Plug SFF NVMe PCIe SSD | 374.4 TB | 24+ x 15.36TB + 6 x 960GB<10W (with optional rear Primary and Secondary 2SFF) |
Heatsink & Fans
This system has 4 Heatsinks for select reasons. You have the Standard (P49145-B21), High-Performance 2U (P48818-B21), High-Performance LP (P48905-B21), and Max Performance (P48817-B21). Based on the CPU TDP, the Heatsink will change as well if you install a Mid-Drive Cage. Then you'll be forced to install the Low Profile Heatsink (P48905-B21).
In general, the Maximum Performance fan kit is required when rear drives, or >205W Processors SKUs, or High-Performance NVMe drives, three drive cages, mid-tray, GPU card, or certain backplanes are populated.
High-Performance fan kit consists of 6 fans, these will need to replace all the standard fans in the unit and fill all 6 fan cages.
Liquid Cooling
There are two Liquid Cooling options for this server. If any are installed, you must also install the correct Tubes for the cooling system to work properly. Please keep in mind the PCIe slot amount. One of these LCs takes up a PCIe slot and is usually installed when a GPU is selected. Some GPUs are DW and take up two slots. Even with 8 PCIe slots you can run out of room fast.
Memory
DIMM Blanks are optional and not required.
Mixing of 3DS memory and non-3DS memory is not supported
Mixing of x4 and x8 memory is not allowed
Mixing of DIMM types (UDIMM, RDIMM, and LRDIMM) is not supported.
If 96GB or higher density memory is selected then High Performance Fan Kit must be selected.
96GB memory cannot be mixed with any other memory.
Expansion Slots
This system has up to 8 PCIe slots and 2 OCP ports. The OCP ports have enablement kits to provide x8 or x16 functionality to the slots. Please take a look at which controller you are trying to install and the slot diagram below to know which slot each controller should be installed in.
| OCP Slot Location | 1 OCP Storage Controller (OROC) + 1OCP NIC | 1 OCP NIC | 2 OCP NICs | 1 OCP Storage Controller (OROC) | 2 OCP Storage Controllers (OROC) |
|---|---|---|---|---|---|
| OCP 1 | OROC | N/A | OCP NIC | OROC (Higher priority) | OROC (Higher priority) |
| OCP 2 (with shared NIC and WoL) | OCP NIC | NIC (higher priority) | OCP NIC (higher priority) | N/A | OROC |
| Riser Information | |||||||
|---|---|---|---|---|---|---|---|
| Part Number | Description | Riser Position | Bus Width (Gen5 Lanes) | ||||
| Primary | Secondary | Tertiary | Top Slot | Middle Slot | Bottom Slot | ||
| N/A | This is the default riser in the chassis | D | N | N | x8 | x16 | x8 |
| P48803-B21 | HPE DL380 Gen11 x16/x16/x16 Primary Riser Kit | O | N | N | x16 | x16 | x16 #1 |
| P51083-B21 | HPE DL380 Gen11 x16/x16/x16 Secondary Riser Kit | N | O | N | x16 | x16 | x16 #2 |
| P48802-B21 | HPE DL38X Gen11 x8/x16/x8 Sec Riser Kit | N | O | N | x8 | x16 | x8 |
| P48804-B21 | HPE DL38X Gen11 2x16 Tertiary Riser Kit | N | N | O | x16 | x16 #3 | |
| P48805-B21 | HPE ProLiant DL380 Gen11 2U Primary/Secondary NEBS-compliant Riser Kit | O | N | N | x8 | x16 | x8 |
| P48806-B21 | HPE ProLiant DL380 Gen11 2U Secondary/Tertiary NEBS-compliant Riser Kit | N | O | N | x8 | x16 | x8 |
|
Notes: − D = Default on chassis; O = Optional; N = not supported or slot/connector not present. − #1 Requires HPE DL380 Gen11 x16/x16/x16 Primary Cable Kit (P56073-B21) − #2 Requires HPE DL380 Gen11 x16/x16/x16 Secondary Cable Kit (P56074-B21) − #3 PCIe Gen4 lanes. − x16 cards installed on x8 slots could observe sub-optimal performance. | |||||||
GPU
System memory should be 2x of GPU memory. Most GPUs need an LC system installed so please take note of the PCIe slots used and which PCIe slot you install the GPU in. Some GPUs require certain parts or have limitations. To view all the rules for each GPU please view the item.
| GPU Information | ||||||
|---|---|---|---|---|---|---|
| Part number | Card | QTY Support | PCIe | 8SFF | 16SFF/8LFF | 24SFF/12LFF |
| S1T66C | Intel® Data Center GPU Max 1100 | 2 | Gen5 | 2@35C(Air) | 2@35C(Air) if CPU ≤ 185W. |
Not Supported |
| R9S41C | NVIDIA H100 80GB PCIe Accelerator | 2 or 3 | Gen5 | 2@25C (Air) 3@20C (DLC) |
2 @ 20C (Air) 2 @ 25C (DLC) |
Not supported |
| S0K90C | NVIDIA L40 48GB PCIe Accelerator | 3 | Gen4 | 3@25C(Air) 3@25C(DLC) |
2@25C(Air) 3@25C(DLC) |
1@25C(Air) 2@25C(DLC) |
| S0K89C | NVIDIA L4 24GB PCIe Accelerator | 8 | Gen4 | 8 | 8@25C(Air) 8@25C(DLC) |
5@25C(Air) 8@25C(DLC) |
| R9P49C | NVIDIA A100 80GB PCIe Non-CEC Accelerator | 3 | Gen4 | 30C | 25C | Not supported |
| R8T26C | NVIDIA A16 64GB PCIe Non-CEC Accelerator for HPE | 3 | Gen4 | 30C | 25C | Not supported |
Storage Controllers
Additional rear drive bays are optional. The system has many Tri-Mode controllers to choose from since each model supports mixed drives. If your system does not have a storage controller installed and the drives are directly attached then you have the possibility to enable VROC. There are two versions of VROC and one only supports NVMe SSD while all models feature an embedded storage controller, with embedded software SATA RAID support for up to 14 bays. To view more about VROC please view the manual.
When installing a controller please take note of what PCIe slot and the lane amount. If you plug a x16 card into an x8 slot you might have some performance issues. If you install a controller with cache, you must also install either (P02377-B21) HPE Smart Storage Hybrid Capacitor with 145mm Cable Kit or (P01366-B21) HPE 96W Smart Storage Lithium-ion Battery with 145mm Cable Kit.
Integrated Lights-Out 6 (iLO 6)
Software that enables you to securely configure, monitor, and update your HPE ProLiant Gen11 servers seamlessly, from anywhere.
Embedded in Hewlett Packard Enterprise servers, HPE Integrated Lights-Out 6 (iLO 6) is an exclusive core intelligence that monitors server status, providing the means for reporting, ongoing management, service alerting, and local or remote management to identify and resolve issues quickly.
Power
Select a minimum (1), or maximum (2) power supplies. The mixing of 2 different power supplies is NOT allowed.
Dimensions & Weight:
LFF CTO servers:
8.75 x 44.8 x 73.25 cm / 3.44 x 17.64 x 28.84 in
12 LFF hard drives (no rear drives), 2x processors, 2x power supplies, 1x RAID controller, 2x Risers installed)
SFF CTO servers:
8.75 x 44.8 x 72.7. cm / 3.44 x 17.64 x 28.62 in
8 SFF hard drives (no rear drives), 2x processors, 2x power supplies, 1x RAID controller, 2x Risers installed)
Price as Configured: 0
Express Computer Systems can ship to virtually any address in the world and provides you with the best shipping rates possible. Cost of shipping varies depending on what service you require, your destination and size of the shipment. Shipping costs will be calculated separately from your order and billed to you post purchase. In the notes section of your order please provide us with your preferred shipping method and we will get back to you.
Custom configured orders ship within 2 business days after all required products are in stock.
Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine, California.
For more information on shipping view our Shipping Information page or send us a message
Express Computer Systems (ECS) provides a 1 year parts warranty against defects in material or workmanship that will affect the products functionality. All refurbished items are tested prior to shipping to guarantee up-time upon arrival. If you are having issues with an item we provided please Contact Us and we will do our best to assist you.
What does our ECS warranty cover?
We offer 1 year warranty as standard and additional
years can be added to fit your needs. Please reach out to a sales associate via the Contact Us page or live chat for more
information on extended coverage options. During the coverage period if your product fails we
will offer a Next Business Day replacement. If we are unable to replace the product we will
refund its original selling price. Shipping costs and tax are not refundable. Express Computer
Systems retains the right to decide whether the goods will be replaced or
refunded.
What is not covered by our warranty?
Our warranty does not cover any problem caused
by the following conditions:
Important notes:
Express Computer Systems is committed to transforming our customers’ IT infrastructure with high quality products at affordable costs. Our sales reps and customer support engineers understand our customers rely heavily on advanced technology to run their business but need to do so without breaking the bank.
We specialize in building custom server configurations, custom storage solutions, networking solutions, and components from top manufacturers including HPE, Dell, Cisco, NetApp, Dell EMC, HPE Nimble and many others.
At Express Computer Systems, we know hardware emergencies can happen at anytime. We also understand that you want to receive the best hardware as quickly as possible. At Express Computer Systems we'll ship the majority of our orders out the same day payment is made. Curious if the item you need will make it out on time? Feel free to contact us directly via the Contact Us link at the bottom, Live Chat feature or (800) 327-0730.
At Express Computer Systems we not only will sell you equipment at a great value, but we'll also purchase your used Dell, Cisco, NetApp or other networking equipment. Feel free to contact us with the model of the items you're looking to sell and we'll get you a quote ASAP. We also have flexible financing options for your purchasing needs.
Every item we sell is tested on-site in our state-of-the-art hardware engineering lab. We use certified technicians to test every piece of equipment as well as updating all necessary firmware. The highest quality of testing and certification is guaranteed. We warranty all of our items we sell. Ask us today about warranty for a specific item.
