Cisco C240 M6 12 LFF Chassis Rack Server | UCSC-C240-M6L

Cisco C240 M6 12 LFF Chassis Rack Server | UCSC-C240-M6L

Does not include power supply, CPU, memory (DIMMs or PMem), hard disk drives (HDDs), solid-state drives (SSDs), boot drives, SD cards, risers, tool-less rail kit, or PCIe cards.

Approved Configurations
The C240 M6 LFF server can be ordered with up to 12 front LFF drives (SAS-only), up to 4 midplane LFF drives (SAS-only), and up to 4 rear SFF drives (SAS/SATA/NVMe)

• There is no RAID support for NVMe drives.
• The Cisco M6 12G SAS RAID Controller with 4 GB FBWC supports up to 32 internal drives with support for RAID 0, 1, 10, 5, 6, 50, 60, and JBOD mode.
• The Cisco M6 12G SAS HBA supports up to 32 internal drives with JBOD support.

Large form-factor (LFF) drives, with 12-drive backplane.

• Front-loading drive bays 1—12 support 3.5-inch SAS-only LFF HDDs.
• Optionally, four 3.5” midplane SAS-only LFF HDDs
• Optionally, four rear-loading drive bays support up to four 2.5 inch SAS/SATA/NVMe drives.

Risers supported in this Chassis:

• PCIe Riser 1B (controlled with CPU1) UCSC-RIS1B-240M6
• PCIe Riser 2A (controlled with CPU2) UCSC-RIS2A-240M6
• PCIe Riser 3B (controlled with CPU2) UCSC-RIS3B-240M6
• Riser filler blank UCSC-FBRS2-C240M6 for riser 2 and UCSC-FBRS3-C240M6 for riser 3 is auto included, if riser 2 or riser 3 are not selected.

The standard CPU features are:

• 3rd Gen Intel® Xeon® Scalable Processors (Ice Lake)
• Intel® C621A series chipset
• Cache size of up to 60 MB
• Up to 40 cores

The available memory main characteristics for the C240 M6 LFF are as follows:

• Clock speed: 3200 MHz
• Ranks per DIMM: 1, 2, 4, or 8
• Operational voltage: 1.2 V
• Registered ECC DDR4 DIMMS (RDIMMs), Load-reduced DIMMs (LRDIMMs), or Intel® Optane™ Persistent Memory Modules (PMem).

DIMM Mixing:

• Mixing different types of DIMM (RDIMM with any type of LRDIMM or 3DS LRDIMM with non-3DS LRDIMM) is not supported within a server.
• Mixing RDIMM with RDIMM types is allowed if they are mixed in same quantities, in a balanced configuration.
• Mixing 16 GB, 32 GB, and 64 GB RDIMMs is supported.
• DIMM mixing is not allowed when PMem are installed; in these cases, all DIMMs must be the same type and size.

The following list summarizes how drives are controlled on the server:

• SAS/SATA drives are controlled through a Cisco 12G RAID Controller, or
• SAS/SATA drives are controlled through a Cisco 12G SAS pass-through HBA
• PCIe NVMe drives are controlled directly from the CPUs

The standard disk drive features are:

• 3.5-inch large form factor (front and mid-plane drives)
• 2.5-inch small form factor (rear drives)
• Hot-pluggable
• Drives come mounted in sleds