-PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
-SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.
Adapter Specs
- Device Type: 10Gb Ethernet Converged Network Adapter (CNA)
- Ports: 2 x 10Gb Ethernet
- Form Factor: Type A mezzanine card
- Interface: PCI Express 2.0 x8
- Data Rate: 20 Gb/s per port bi-directional (40 Gb/s total)
- Processor: Cavium 57810S with integrated MAC/PHY
- Protocols Supported: iSCSI, FCoE, VLAN, IPv6
- Virtualization Features: SR-IOV, NPAR, NetQueue, VMQ, Tunnel Offload
- Management: PXE Boot, SNMP, HPE Insight Manager
- Supported Servers: HPE BladeSystem c-Class Gen8/Gen9 (e.g., BL460c Gen9)
- Power Consumption: <12 W
- Compliance: IEEE 802.3 series, RoHS, FCC Class A
- Operating Temperature: 0° to 55°C (32° to 131°F)
Part Number:
- 700746-001
The HPE FlexFabric 10Gb 2-Port 534M Adapter (700746-001) is a high-performance mezzanine card designed for HPE BladeSystem c-Class Gen8 and Gen9 servers. This adapter supports converged network traffic, combining Ethernet and storage protocols (iSCSI and FCoE) into a single 10GbE infrastructure. Powered by the Cavium 57810S chipset, it delivers up to 40 Gb/s of aggregate throughput while minimizing power usage.
Designed for demanding virtualized environments, the 534M supports advanced features such as SR-IOV, NPAR, and tunnel offloading (VXLAN/NVGRE). It integrates seamlessly with Virtual Connect Flex-10 modules, allowing up to four physical NICs per port with bandwidth controls in 100 Mb increments. This adapter is a robust solution for enterprise networks needing efficient, scalable connectivity.