Previous | Next
Home / All / Dell PERC 12 H965i Front RAID Controller Kit w/ Battery | G1RWV

Dell PERC 12 H965i Front RAID Controller Kit w/ Battery | G1RWV

Dell

| Adapter
$1,345.00

This kit includes

Quick Specs
Enclosures per port

Not applicable

Cache:

8GB DDR4 3200MT/s

RAID Level:

0, 1, 5, 6, 10, 50, 60

Non-RAID:

Yes

PCIe:

Gen 4

Processor:

Broadcom RAID-on-chip, SAS4116W chipset

Battery Backup:

Yes

Max no of VDs in RAID mode:

240

Max no of disk groups:

64

Max no of VDs per disk group:

16

Hot-swap devices supported:

Yes

Drive sector size supported:

512n, 512e, and 4Kn

Storage Boot Support:

UEFI-only

Supported Drives:
  • 3Gb/s, 6Gb/s SATA
  • 22.5 (24Gb/s), 12Gb/s, & 6Gb/s SAS
  • NVMe Gen3 (8 GT/s) and Gen4 (16 GT/s)
Max SAS/SATA disks:
  • 16 drives per controller
  • w/ SAS Expander: Limited by platform offerings
Max NVMe drives:
  • 8 drives per controller
  • 12x Drives+ w/ PCIe Switch Expander: Limited by platform offerings
Max physical disks:
  • 240 SAS/SATA
  • 24 NVMe
Part Number:
  • G1RWV
Summary of RAID levels

Summary of RAID levels Following is a list of the RAID levels supported by the PERC 12 series of cards:

  • RAID 0

    Uses disk striping to provide high data throughput, especially for large files in an environment that requires no data redundancy.

  • RAID 1

    Uses disk mirroring so that data written to one physical disk is simultaneously written to another physical disk. RAID 1 is good for small databases or other applications that require small capacity and complete data redundancy.

  • RAID 5

    Uses disk striping and parity data across all physical disks (distributed parity) to provide high data throughput and data redundancy, especially for small random access.

  • RAID 6

    Is an extension of RAID 5 and uses an additional parity block. RAID 6 uses block-level striping with two parity blocks distributed across all member disks. RAID 6 provides protection against double disk failures, and failures while a single disk is rebuilding. If you are using only one array, deploying RAID 6 is more effective than deploying a hot spare disk.

  • RAID 10

    Is a combination of RAID 0 and RAID 1, uses disk striping across mirrored disks. It provides high data throughput and complete data redundancy.

  • RAID 50

    Is a combination of RAID 0 and RAID 5 where a RAID 0 array is striped across RAID 5 elements. RAID 50 requires at least six disks.

  • RAID 60

    Is a combination of RAID 0 and RAID 6 where a RAID 0 array is striped across RAID 6 elements. RAID 60 requires at least eight disks.

Compatible With:
  • Dell R770

(Click to View)