Please remove $0 item(s) from cart - or - Request for Quote

HPE ProLiant BL460c Gen10 CTO Server Blade

Brand:
Type:
CTO Servers
Condition:
ECS Refurbished & Tested
-PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
-SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.

Multi-Quantity Discounts Available for ALL Line Items

** LARGE DISCOUNTS available for complete systems. Pricing displayed is for single item purchases **

Use the configuration tool to create your solution and submit it us for a quote OR send us a message with your complete build requirements to receive best pricing

READ ME

  • Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
  • “Submit for Quote” items can be added to your cart and sent to us via the cart page
  • Click the blue bar to close/open a section from view after choosing your options

Server Chassis

HPE Processors

Intel Xeon Gen 1

Supports up to (2) processors

Intel Xeon Gen 2

Supports up to (2) processors

HPE Memory for the Intel Xeon Gen 1 (Optional)

8 DIMMs per processor (up to 16 DIMMs in a dual-processor configuration)
HPE 16GB NVDIMMs are only supported in servers with first-generation Intel Xeon Scalable processors installed.
The server blade can support up to 12 NVDIMMs in 2 socket servers
For NVDIMM's you must have An HPE Smart Storage Battery on Right Baffle
A minimum of one regular DIMM: The system cannot have only NVDIMM-Ns installed.

HPE Memory for the Intel Xeon Gen 2 (Optional)

8 DIMMs per processor (up to 16 DIMMs in a dual-processor configuration)
HPE 16GB NVDIMMs are only supported in servers with first-generation Intel Xeon Scalable processors installed.

Storage Battery (Optional)

HPE Smart Storage Batteries provide backup power to Smart Array Cache and NVDIMMs in the event a server power failure.
This gets installed on the top of the right DIMM Baffle.
If you installed any NVDIMM's you'll need this battery to perform the backup.

HPE Network Adapters (Optional)

Any of these cards will come with the Mezzanine Assembly 784960-001
2 Mezzanine Slots (1 Type A and 1 Type A or Type B)
The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode, Only one port is active in slot 1.
Must install two processors for both Mezz slots to work.

HPE FlexibleLOM Adapter (Optional)

Notes: The server requires one (1) FlexibleLOM that is installed in the FlexibleLOM connectors. All FlexibleLOMs are dual port: One port is routed to interconnect module bay 1 and the other to bay 2.

HPE RAID Controllers (Optional)

The HPE Smart Array S100i SR Controller (chipset SATA) comes standard
If RAID is required when using the S100i, please choose ‘HPE FIO Enable SmartArray S100i SR Setting’ (784308-B21).
The HPE Gen10 NVMe FIO Setting (873373-B21) is required to support SFF NVMe SSDs within the system. Along with the NVMe Pass-Thru. This option is not compatible with the HPE Smart Array P204 i-b.
If the NVMe Drives are installed. HPE recommends the use of a dual M.2 solid state drive enablement kit (873870-B21) together with M.2 SSD media for boot when using this option.

HPE Factory Integration Options (FIO) Settings Options (Optional)

Legacy BIOS setting (758959-B22) changes default UEFI BIOS setting. It's not supported with HPE Dual 8GB microSD EM USB Kit (741279-B21) nor with HPE FIO Enable Smart Array S100i SR Setting (784308-B21).
Must select HPE Gen10 TPM 1.2 FIO if the Legacy BIOS setting is selected.

HPE SFF Drives SAS (2.5in) SSD (Optional)

HPE SFF Drives SATA (2.5in) SSD (Optional)

HPE SFF Drives SAS (2.5in) HDD (Optional)

HPE NVMe drives (Optional)

Must install :
HPE NVMe Factory Integration Options (FIO) Special Enablement Kits | 873373-B21
HPE NVMe pass-through Controller | 877975-001

M.2 Enablement kit (Optional)

The M.2 riser is installed on the top of the left DIMM Baffle.
M.2 drives cannot be mixed with other sizes and capacities within the system.
RAID 1, 0, and 5 are provided through the S100i in UEFI BIOS mode only.

HPE Server Management (Optional)

HPE iLO Management with Intelligent Provisioning (standard)

Trusted Platform Module (TPM) (Optional)

This option is not supported on Gen9 and earlier server blades.
HPE Gen10 TPM 1.2 FIO Setting 872108-B21 Notes: Can only be selected with TPM 2.0 Gen10 Kit (864279-B21)

ESC Warranty

Helpful Tip: Once desired configuration is selected click "Add to Cart". From the cart page you can submit a submit a quote request for best pricing

What's New for BL460c Gen10
  • Intel Xeon Scalable Family Generation 2 processors (x2xx) − New level of performance per core processors
  • Higher speed memory @ 2933 MT/s for a select new Intel Generation 2 processors
  • Additional Drive solutions

The HPE ProLiant BL460c Gen10 Server Blade now offers the Intel Xeon Processor Scalable Family with up to 25%5 bin to bin performance gain over the previous generation, plus 2666 MT/s HPE DDR4 SmartMemory. Additional support includes tiered storage controller options, internal 12 Gb/s SAS, 20 Gb n, support for two M.2, NVMe, or up to four uFF drives.

Designed for a wide range of configuration and deployment options, the HPE ProLiant BL460c Gen10 Server Blade provides the flexibility to optimize your core IT applications with right-sized storage for the right workload for a lower TCO. All of this may be managed by HPE OneView, the converged management platform that accelerates IT operations, business delivery and boosts overall performance.

Ideal for:

  • Cloud Servers
  • Corporate IT
  • Database
  • Retail Servers

CTO Configuration Support

Need help with the configuration? Contact us today!

Processors | (2) Intel® Xeon® Scalable 1st or 2nd Gen

The HPE BL460c Gen10 supports up to two Intel® Xeon® Scalable 1st or 2nd Gen processors, delivering high performance and scalability for demanding workloads. The server supports a maximum memory capacity of 512GB per socket with 64GB DIMMs, totaling up to 1TB in a dual-socket configuration, with future support for larger DIMMs as they are qualified. Additionally, the server offers 16 DIMM slots in a two-processor setup, ensuring flexibility for memory-intensive applications. Its design emphasizes reliability and compatibility for modern data center environments.

For processors with a TDP of 135W or greater, the c7000 enclosure requires 10 fans to ensure optimal cooling and performance.

HPE ProLiant BL460c Gen10 CTO Server Blade Intel Processor
Memory | 16 DIMM DDR4

HPE memory from previous generation servers is not supported with this server. HPE SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen10. LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a server. with the use of the gen 2 intel processors, the hpe bl 460c gen 10 can support larger DIMMM capacities and higher speeds.


2TB Memory (LRDIMM)
  • 16 x 128GB up to 2666MT/s at 1.2V (processor dependent)
  • 16 x 128GB up to 2933MT/s at 1.2V (Gen2 processor dependent)

1TB Memory (RDIMM)
  • 16 x 32GB up to 2666MT/s at 1.2V
  • 16 x 64GB up to 2933MT/s at 1.2V(Gen2 processor dependent)
Storage Controllers

The HPE BL460c Gen10 Server Blade supports the HPE Smart Array P204i-b and HPE Smart Array S100i SR Gen10 SW RAID (chipset SATA), which allow up to 2 SFF or 4 uFF hot-plug drive bays. The HPE Smart Array S100i SR Controller comes standard with the server's 10Gb/20Gb FLB CTO Blade configuration. If the P204i-b controller is not selected, a SATA cable is included to support SATA devices in the two internal drive bays. For RAID functionality with the S100i, the ‘HPE FIO Enable Smart Array S100i SR Setting’ (784308-B21) must be chosen.

NVMe Drives

The HPE BL460c Gen10 Server Blade supports NVMe drives through the HPE Gen10 NVMe FIO Setting (873373-B21), which is available on CTO models only. This setting is required to enable SFF NVMe SSDs within the system but is incompatible with the HPE Smart Array P204i-b Controller.

M.2 Boot Options

For boot functionality, HPE recommends using the Dual M.2 Solid State Drive Enablement Kit (873870-B21) with compatible M.2 SSD media. This configuration provides high-performance storage options tailored for demanding workloads.

HPE BL460c Gen 9 Storage Controllers
Networking | FlexibleLOM

HPE FlexibleLOM provides the ability to customize server networking today and the ability to meet future needs without overhauling server hardware. Provides choice of bandwidth and fabric (Ethernet, FCoE, InfiniBand), supports WOL, and provides a shared iLO port for ease of use.

The server requires one (1) FlexibleLOM that is installed in the FlexibleLOM connectors. All FlexibleLOMs are dual port: One port is routed to interconnect module bay 1 and the other to bay 2.

FlexibleLOM: Provides basic, customizable external network connectivity, allowing the blade to communicate with the outside network through the enclosure’s interconnect bays. Each port is autosensing the speed, and can interoperate with 1Gb HPE BladeSystem c-Class interconnect components. Both ports will operate at the same speed.

HPE BL460c Gen 8 Flexible LOM
Expansion | Mezzanine Slot 1, 2

The HPE server features two I/O expansion mezzanine slots: Expansion Slot 1 is a x16 PCIe 3.0 Type A slot that supports dual-port mezzanine cards, with one port routed to interconnect module bay 3 and the other to bay 4. Expansion Slot 2 is a x16 PCIe 3.0 Type B slot, compatible with both Type A and Type B mezzanine cards. This slot supports dual-port and quad-port mezzanine cards—dual-port cards route one port each to bays 5 and 6, while quad-port cards route to bays 5, 6, 7, and 8. Note that Expansion Slot 2 requires a second processor to be installed for activation.


Mezzanine card options include:
  • Dual-port 20Gb FlexFabric, Dual-port 10Gb FlexFabric, 10GbE options, and quad-port 1Gb Ethernet server adapter mezzanine options for additional network ports
  • Dual-port 16Gb Fibre Channel HBA for SAN connectivity
  • QDR and FDR InfiniBand for low latency and high bandwidth server interconnectivity
  • I/O accelerator mezzanine options for high transaction rate local storage
HPE BL460c Gen 8 Mezzanine Expansion slot 1 & 2
Type A vs B
  • Type A: x16 PCIe 3.0 slot, moderate bandwidth, and limited to Type A slots.
  • Type B: x16 PCIe 3.0 Slot, high bandwidth, compatible with both Type A & B

Expansion Slot 1
  • x16 PCIe 3.0
  • Type A Controllers
  • Supports Dual-port Mezz Cards
  • Ports routed to interconnect module bays 3 and 4.
  • When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active (regardless of operating mode). When installed in mezzanine slot 2, both ports are active.

Expansion Slot 2
  • Requires a second processor
  • x16 PCIe 3.0
  • Type A or B Controllers
  • Supports Dual-port and Quad-port Mezz Cards
  • Dual-Ports routed to interconnect module bays 5 & 6.
  • Quad-Ports routed to interconnect module bays 5, 6, 7, & 8.
Dimensions & Weight
Dimensions (H x W x D)

Inches: 7.11 x 2.18 x 20.37 in

Centimeter: 18.07 x 5.54 x 51.76 cm

Weight (approximate)

Maximum: all processors, 16 DIMMs, hard drives, mezzanine cards, and two flash cache batteries installed) 14.00 lb (6.33 kg)

Minimum: one processor and 2 DIMMs installed 10.50 lb (4.75 kg)

FlexibleLOM & Expansion Interconnect Mapping
HPE BL460c Gen 8 Interconnect c3000 Mapping
HPE BL460c Gen 8 Interconnect c3000 Mapping

Server blade signal Interconnect bay number Interconnect bay label Notes
FlexibleLOM 1 🟠
Mezzanine 1 2 🟡 Four port cards connect to bay 2.
Mezzanine 2 3 and 4 🔵🔷
  • Four port cards
  • Ports 1 and 3 connect to bay 3.
  • Ports 2 and 4 connect to bay 4.
 

Current Configuration

Server Chassis

HPE Processors

HPE Memory for the Intel Xeon Gen 1 (Optional)

HPE Memory for the Intel Xeon Gen 2 (Optional)

Storage Battery (Optional)

HPE Network Adapters (Optional)

HPE FlexibleLOM Adapter (Optional)

HPE RAID Controllers (Optional)

HPE Factory Integration Options (FIO) Settings Options (Optional)

HPE SFF Drives SAS (2.5in) SSD (Optional)

HPE SFF Drives SATA (2.5in) SSD (Optional)

HPE SFF Drives SAS (2.5in) HDD (Optional)

HPE NVMe drives (Optional)

M.2 Enablement kit (Optional)

HPE Server Management (Optional)

Trusted Platform Module (TPM) (Optional)

ESC Warranty

*list also serves as quick links to each section

Welcome to the Request Express Quoting Form!

for: HPE ProLiant BL460c Gen10 CTO Server Blade


This streamlined form is designed to simplify the quoting process for you. Whether you're uncertain about specific parts or seeking a hassle-free experience, you're in the right place.

Provide us with the necessary details, and we'll generate a customized quote for your server. Even if you're unsure about the exact components you need, we've got you covered. Our team will tailor a solution based on the information you provide.

Let's get started!
Simply fill out the form, and we'll take care of the rest.


Name *
Email *
Message *
Preferred Brand
Form Factor
Rack Unit of Height (#U)
Processor(s)
Memory
Total Amount of Memory
Total Amount of Usable Storage

Storage Type


RAID

List Networking Connection needed:
Rack Space Restrictions
Which OS do you plan on using:


Price as Configured: 0

Add to Cart

Error Submitting Cart. Please get in touch with us for support.

Please select all the mandatory items in the configuration list before submitting the cart.

One or more items in your cart has no price. This will be submitted as a "Request for a Quote".

Product Specs

Base Standard Capabilities

Technical specificationsHPE ProLiant BL460c Gen10 Server Blade
Processor familyIntel® Xeon® Scalable 8100 series
Intel® Xeon® Scalable 6100 series
Intel® Xeon® Scalable 5100 series
Intel® Xeon® Scalable 4100 series
Intel® Xeon® Scalable 3100 series
Processor speed3.6 GHz
Number of processors2 or 1
Processor core available4 or 6 or 8 or 10 or 12 or 14 or 16 or 18 or 20 or 22 or 24 or 26, per processor, depending on model
Processor cache8.25 MB L3
11.00 MB L3
13.75 MB L3
16.50 MB L3
19.25 MB L3
22.00 MB L3
24.75 MB L3
27.50 MB L3
32.50 MB L3
33.00 MB L3
35.75 MB L3
Drive description2 SFF SAS/SATA/SSD or 2 SFF NVMe (optional) SSD
Expansion slots2, for detail descriptions reference the QuickSpecs
Memory typeHPE DDR4 SmartMemory
Memory slots16 DIMM slots
Maximum memory2 TB, using 128 GB DIMMs, available second half 2017
Network controllerHPE 10 Gb 536FLB FlexFabric adapter 2-ports per controller or HPE 20 Gb 650FLB FlexFabric adapter 2-ports per controller, depending on model
Storage controllerHPE Smart Array S100i and/or HPE Smart Array P204i-b, depending on model
Power supply type(6) Enclosure-based
System fan featuresHot-plug enclosure-based
Infrastructure managementHPE iLO Management with Intelligent Provisioning (standard), HPE iLO Advanced for BladeSystem, HPE OneView Advanced (optional)

Shipping Information

Express Computer Systems can ship to virtually any address in the world and provides you with the best shipping rates possible. Cost of shipping varies depending on what service you require, your destination and size of the shipment. Shipping costs will be calculated separately from your order and billed to you post purchase. In the notes section of your order please provide us with your preferred shipping method and we will get back to you.

Custom configured orders ship within 2 business days after all required products are in stock.

Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine, California.

Domestic Shipments
  • Standard Ground
    • Shipping time: 2-7 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-10 business days
    • Excludes weekends, holidays or weather delays.
  • 3 Business Days
    • Shipping time: 3 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 3-6 business days
    • Excludes weekends, holidays or weather delays.
  • 2 Business Days
    • Shipping time: 2 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-5 business days
    • Excludes weekends, holidays or weather delays.
  • Overnight / Next Business Day
    • Shipping time: 1 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 1-4 business days
    • Excludes weekends, holidays or weather delays.
International Shipments
  • International Economy
    • Shipping time: 4-6 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 5-9 business days
    • Excludes weekends, holidays or weather delays.
  • International Priority
    • Shipping time: 1-3 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-6 business days
    • Excludes weekends, holidays or weather delays.

For more information on shipping view our Shipping Information page or send us a message

ECS Warranty Information

Express Computer Systems (ECS) provides a 1 year parts warranty against defects in material or workmanship that will affect the products functionality. All refurbished items are tested prior to shipping to guarantee up-time upon arrival. If you are having issues with an item we provided please Contact Us and we will do our best to assist you.

What does our ECS warranty cover?
We offer 1 year warranty as standard and additional years can be added to fit your needs. Please reach out to a sales associate via the Contact Us page or live chat for more information on extended coverage options. During the coverage period if your product fails we will offer a Next Business Day replacement. If we are unable to replace the product we will refund its original selling price. Shipping costs and tax are not refundable. Express Computer Systems retains the right to decide whether the goods will be replaced or refunded.

What is not covered by our warranty?
Our warranty does not cover any problem caused by the following conditions:

  1. accidents; misuse; carelessness; electrostatic discharge; shock; temperature or humidity beyond the specifications of the product; improper installation; operation; modification;
  2. any improper use that contravenes the instructions in the user manual;
  3. problems caused by other equipment. Our warranty is void if the product is returned with damaged, removed, counterfeit labels, or any modifications (including any component or external cover removal). Our warranties do not cover data loss or damages to any other equipment. In addition, our warranties do not cover incidental damages, consequential damages, or costs related to data recovery, removal, and installation.

Important notes:

  • Please ask for additional warranty/coverage that you may require in addition to the standard 1 ECS warranty prior to final purchase. Requesting additional warranty after your purchase can be denied.
  • FREE technical support is provided on purchased items via phone, email, or live chat.

About Express Computer Systems

Express Computer Systems is committed to transforming our customers’ IT infrastructure with high quality products at affordable costs. Our sales reps and customer support engineers understand our customers rely heavily on advanced technology to run their business but need to do so without breaking the bank.

We specialize in building custom server configurations, custom storage solutions, networking solutions, and components from top manufacturers including HPE, Dell, Cisco, NetApp, Dell EMC, HPE Nimble and many others.

Subscribe