Quick Specs
(for control of up to 8 SATA-only drives using AHCI)
The default configuration is Advanced Host Control Interface (AHCI), which supports SATA-only drives. A maximum of 8 SATA drives are supported with AHCI and this configuration requires a SATA interposer board, which plugs directly into the drive backplane. The SATA Interposer supports drives in slots 1-8. AHCI is limited to Windows and Linux operating systems only
Accessories/spare included with drive controller (For UCSC-C220-M7S):
- UCSC-RDBKT-22XM7 is included with the selection of UCSC-SAS-T-D drive controller.
- CBL-SAS-C220M7, CBL-SCAP-C220-D, UCS-SCAP-D and UCSC-RDBKT-22XM7 are included with the selection of UCSC-RAID-T-D drive controller
- CBL-SAS-Y-C220M7, CBL-SCAP-C220-D, UCS-SCAP-D and UCSC-HPBKT-22XM7 are included with the selection of UCSC-RAID-HP drive controller.
- CBL-SAS-Y-C220M7 and UCSC-HPBKT-22XM7 are included with the selection of UCSC-RAID-M1L16 drive controller.
- CBL-SAS-Y-C220M7, and UCSC-HPBKT-22XM7 are included with the selection of UCSC-HBA-M1L16 drive controller.
- NOTE: If you are adding drive controller later as spare, you may need to order cables/supercap/super cables and controllers bracket with it.
Compatible With:
- Cisco Series C220
(Click to View)