{"product_id":"r1-2210","title":"R1-2210 - Dell PowerEdge VRTX 10GbE I\/O Module Switch (4x SFP+ External \/ 16x Internal \/ 2x 1GbE)","description":"\u003cdiv class=\"w-100 product-section container jc-between-center is-flex-row\"\u003e\n\u003cdiv class=\"twelve columns medium-down--one-whole-NG product-section-extras quick-specs\"\u003e\n\u003cdiv class=\"one-whole columns quick-specs-data\"\u003e\n\u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cul class=\"margin-empty margin-bottom\"\u003e\n  \u003cli\u003eDell VRTX R1-2210 10GbE I\/O Module Switch: 4x 10GbE SFP+ external, 16x 10GbE internal and 2x 1GbE ports.\u003c\/li\u003e\n  \u003cli\u003eThis switch is for the VRTX so the nodes \/ sleds \/ blades can be accessed.\u003c\/li\u003e\n  \u003cli\u003elayer 2\u003c\/li\u003e\n\u003cli\u003eInternal 10Gb SFP+ ports: 16\u003c\/li\u003e\n\u003cli\u003eExternal 10Gb SFP+ ports: 4\u003c\/li\u003e\n\u003cli\u003eExternal 1Gb RJ45 ports: 2\u003c\/li\u003e\n\u003cli\u003eTotal ports: 20x 10GbE (16 internal + 4 external) plus 2x 1GbE\u003c\/li\u003e\n\u003cli\u003eServer connections: 4 internal 10GbE lanes per server module, 16 total (Fabric A)\u003c\/li\u003e\n\u003cli\u003eManagement port: 1 out-of-band port (shared with the chassis CMC)\u003c\/li\u003e\n\u003cli\u003eConsole: external UART console port\u003c\/li\u003e\n\u003cli\u003eSwitching mode: Layer 2+ with IPv4 static routing (always enabled on the R1-2210)\u003c\/li\u003e\n\u003cli\u003eIPv6: dual-stack IPv4\/IPv6 host support\u003c\/li\u003e\n\u003cli\u003eMAC address table: up to 16K entries\u003c\/li\u003e\n\u003cli\u003eLink aggregation: up to 32 LAGs with up to 8 member ports each, LACP\u003c\/li\u003e\n\u003cli\u003eVLANs: IEEE 802.1Q tagging, port-based VLANs, GVRP and Voice VLAN\u003c\/li\u003e\n\u003cli\u003eSpanning tree: STP (802.1D), RSTP (802.1w) and MSTP (802.1s)\u003c\/li\u003e\n\u003cli\u003eMulticast: IGMP snooping and MLD snooping\u003c\/li\u003e\n\u003cli\u003eQoS: 802.1p class of service and ACL-based advanced QoS\u003c\/li\u003e\n\u003cli\u003eJumbo frames: up to 10 Kb\u003c\/li\u003e\n\u003cli\u003eManagement: web GUI, CLI over Telnet or SSH v2, SNMP v1\/v2\/v3, RMON and sFlow v5\u003c\/li\u003e\n\u003cli\u003eSecurity: RADIUS, TACACS+, 802.1x authentication and ACLs\u003c\/li\u003e\n\u003cli\u003eChassis: Dell PowerEdge VRTX, Fabric A I\/O module bay\u003c\/li\u003e\n\u003cli\u003eMinimum CMC firmware: VRTX CMC 2.00\u003c\/li\u003e\n\u003cli\u003eRegulatory model: E12M\u003c\/li\u003e\n\u003cli\u003eIncluded: Dell PowerEdge VRTX R1-2210 10GbE I\/O module switch with SFP+ transceivers (no cables)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"four-NG medium-down--one-whole-NG product-section-extras ideal-for\"\u003e\n\u003cdiv class=\"hfour\"\u003ePart Number:\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eR1-2210\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe VTRX 10GbE Switch Module, model R1-2210, is a layer 2 switch that supports speeds up to 10 Gbps. Both the switch GUI and CLI provide access for configuring the switch. The OOB management IP must be on a different IP subnet than those defined on all other switch interfaces (port, VLAN). Blade servers are connected to internal (te 1\/1 – te 4\/4) ports. The internal ports communicate together allowing for east-west traffic. The external ports allow for north-south communication to any upstream devices on the network as if the ports were typical switching\/bridging device.\u003c\/p\u003e\n","brand":"Dell","offers":[{"title":"Default Title","offer_id":44222202773816,"sku":"R1-2210","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/products\/vrtx-Dell-10gb_pass-th_front.jpg?v=1671051491","url":"https:\/\/expresscomputersystems.com\/products\/r1-2210","provider":"Express Computer Systems","version":"1.0","type":"link"}