{"title":"stab-in-static","description":null,"products":[{"product_id":"rapidrails-static","title":"Dell RapidRails Static Rails for 4-Post Square Hole Racks","description":"\u003cdiv class=\"product-default-container\"\u003e\n\u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePost Type\u003c\/b\u003e: 4-post Square Hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail Type\u003c\/b\u003e: RapidRails Static Rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail Height\u003c\/b\u003e: N\/A\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCMA\u003c\/b\u003e: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":32292663754837,"sku":"RapidRails-Static","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-1u-sliding-readyrails-rail-kit-a8","title":"Dell A8 Stab-In Static ReadyRails Rail Kit | 53D7M","description":"\u003cdiv class=\"product-default-container\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eStab-in static rails require the inner (chassis) rail members must first be attached to the sides of the system and then inserted into the outer (cabinet) members installed in the rack. For systems that are 2U and larger, it is recommended that two people perform this operation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA8\u003c\/td\u003e\n\u003ctd\u003eReadyRails \u003c\/td\u003e\n\u003ctd\u003eStab-in Static\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX c\u003c\/td\u003e\n\u003ctd\u003e608\u003c\/td\u003e\n\u003ctd\u003e879\u003c\/td\u003e\n\u003ctd\u003e594\u003c\/td\u003e\n\u003ctd\u003e872\u003c\/td\u003e\n\u003ctd\u003e610\u003c\/td\u003e\n\u003ctd\u003e898\u003c\/td\u003e\n\u003ctd\u003e622 n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003en Rail depth represents cabinet assembly only and does not represent inner rail component that attaches to chassis\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47401868788024,"sku":"53D7M","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/dell-rail-kit-53d7m-out---3_ffbab105-d237-4872-ad0b-09b871723116.jpg?v=1753718955"},{"product_id":"dell-1u-stab-in-static-readyrails-rail-kit-a14","title":"Dell A14 Stab-In Static ReadyRails Rail Kit | MF3D9","description":"\u003cdiv class=\"product-default-container\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eStab-in static rails require the inner (chassis) rail members must first be attached to the sides of the system and then inserted into the outer (cabinet) members installed in the rack. For systems that are 2U and larger, it is recommended that two people perform this operation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA14\u003c\/td\u003e\n\u003ctd\u003eReadyRails \u003c\/td\u003e\n\u003ctd\u003eStab-in Static\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX c\u003c\/td\u003e\n\u003ctd\u003e608\u003c\/td\u003e\n\u003ctd\u003e880\u003c\/td\u003e\n\u003ctd\u003e594\u003c\/td\u003e\n\u003ctd\u003e870\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e605\u003c\/td\u003e\n\u003ctd\u003e893\u003c\/td\u003e\n\u003ctd\u003e622 n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003en Rail depth represents cabinet assembly only and does not represent inner rail component that attaches to chassis\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402025255224,"sku":"MF3D9","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/MF3D9-dell-a14---001.jpg?v=1778096149"},{"product_id":"dell-2u-stab-in-static-readyrails-rail-kit-b4","title":"Dell B4 Stab-In Static ReadyRails Rail Kit | H872R","description":"\u003cdiv class=\"product-default-container\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eStab-in static rails require the inner (chassis) rail members must first be attached to the sides of the system and then inserted into the outer (cabinet) members installed in the rack. For systems that are 2U and larger, it is recommended that two people perform this operation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eB4\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eReadyRails \u003c\/td\u003e\n\u003ctd\u003eStab-in Static\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX c\u003c\/td\u003e\n\u003ctd\u003e608\u003c\/td\u003e\n\u003ctd\u003e879\u003c\/td\u003e\n\u003ctd\u003e594\u003c\/td\u003e\n\u003ctd\u003e872\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e610\u003c\/td\u003e\n\u003ctd\u003e898\u003c\/td\u003e\n\u003ctd\u003e622 n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003en Rail depth represents cabinet assembly only and does not represent inner rail component that attaches to chassis\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402265575736,"sku":"H872R","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/B4--H872R.jpg?v=1724794594"},{"product_id":"dell-2u-stab-in-static-readyrails-rail-kit-b20","title":"Dell B20 Stab-In Static ReadyRails Rail Kit | PF21C","description":"\u003cdiv class=\"product-default-container\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eStab-in static rails require the inner (chassis) rail members must first be attached to the sides of the system and then inserted into the outer (cabinet) members installed in the rack. For systems that are 2U and larger, it is recommended that two people perform this operation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eB20\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eReadyRails \u003c\/td\u003e\n\u003ctd\u003eStab-in Static\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX c\u003c\/td\u003e\n\u003ctd\u003e608\u003c\/td\u003e\n\u003ctd\u003e879\u003c\/td\u003e\n\u003ctd\u003e594\u003c\/td\u003e\n\u003ctd\u003e872\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e610\u003c\/td\u003e\n\u003ctd\u003e898\u003c\/td\u003e\n\u003ctd\u003e622 n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003en Rail depth represents cabinet assembly only and does not represent inner rail component that attaches to chassis\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402284712248,"sku":"PF21C","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/b20-PF21C.jpg?v=1711396631"},{"product_id":"dell-2u-stab-in-static-readyrails-rail-kit-b17","title":"Dell B17 Stab-in Static ReadyRails Rail Kit","description":"\u003cdiv class=\"product-default-container\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eStab-in static rails require the inner (chassis) rail members must first be attached to the sides of the system and then inserted into the outer (cabinet) members installed in the rack. For systems that are 2U and larger, it is recommended that two people perform this operation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eB17\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eReadyRails \u003c\/td\u003e\n\u003ctd\u003eStab-in Static\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX c\u003c\/td\u003e\n\u003ctd\u003e608\u003c\/td\u003e\n\u003ctd\u003e879\u003c\/td\u003e\n\u003ctd\u003e594\u003c\/td\u003e\n\u003ctd\u003e872\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e610\u003c\/td\u003e\n\u003ctd\u003e898\u003c\/td\u003e\n\u003ctd\u003e622 n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003en Rail depth represents cabinet assembly only and does not represent inner rail component that attaches to chassis\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402316038456,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-2u-stab-in-static-readyrails-rail-kit-b33","title":"Dell B33 Stab-in Static ReadyRails Rail Kit","description":"\u003cdiv class=\"product-default-container\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eStab-in static rails require the inner (chassis) rail members must first be attached to the sides of the system and then inserted into the outer (cabinet) members installed in the rack. For systems that are 2U and larger, it is recommended that two people perform this operation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eB33\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eReadyRails \u003c\/td\u003e\n\u003ctd\u003eStab-in Static\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX c\u003c\/td\u003e\n\u003ctd\u003e608\u003c\/td\u003e\n\u003ctd\u003e879\u003c\/td\u003e\n\u003ctd\u003e594\u003c\/td\u003e\n\u003ctd\u003e872\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e610\u003c\/td\u003e\n\u003ctd\u003e898\u003c\/td\u003e\n\u003ctd\u003e622 n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003en Rail depth represents cabinet assembly only and does not represent inner rail component that attaches to chassis\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402324853048,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-2u-stab-in-static-readyrails-rail-kit-b24","title":"Dell B24 Stab-in Static ReadyRails Rail Kit","description":"\u003cdiv class=\"product-default-container\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eStab-in static rails require the inner (chassis) rail members must first be attached to the sides of the system and then inserted into the outer (cabinet) members installed in the rack. For systems that are 2U and larger, it is recommended that two people perform this operation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eB24\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eReadyRails \u003c\/td\u003e\n\u003ctd\u003eStab-in Static\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX c\u003c\/td\u003e\n\u003ctd\u003e609\u003c\/td\u003e\n\u003ctd\u003e881\u003c\/td\u003e\n\u003ctd\u003e594\u003c\/td\u003e\n\u003ctd\u003e874\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e615\u003c\/td\u003e\n\u003ctd\u003e899\u003c\/td\u003e\n\u003ctd\u003e622 n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003en Rail depth represents cabinet assembly only and does not represent inner rail component that attaches to chassis\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402372530488,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-2u-stab-in-static-readyrails-ii-4-post-rail-kit-b11","title":"Dell B11 Stab-in Static ReadyRails Il 4-Post Rail Kit","description":"\u003cdiv class=\"product-default-container\"\u003e\n\u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cb\u003eSliding rails\u003c\/b\u003e  allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eB11\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eStab-in Static\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e644\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e916\u003c\/td\u003e\n\u003ctd\u003e632\u003c\/td\u003e\n\u003ctd\u003e910\u003c\/td\u003e\n\u003ctd\u003e644\u003c\/td\u003e\n\u003ctd\u003e930\u003c\/td\u003e\n\u003ctd\u003e828\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402414375224,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-2u-stab-in-static-readyrails-ii-4-post-rail-kit-a9","title":"Dell A9 Stab-in Static ReadyRails Il 4-Post Rail Kit","description":"\u003cdiv class=\"product-default-container\"\u003e\n\u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cb\u003eSliding rails\u003c\/b\u003e  allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA9\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eStab-in Static h\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c,d\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e643\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e916\u003c\/td\u003e\n\u003ctd\u003e631\u003c\/td\u003e\n\u003ctd\u003e910\u003c\/td\u003e\n\u003ctd\u003e643\u003c\/td\u003e\n\u003ctd\u003e930\u003c\/td\u003e\n\u003ctd\u003e766\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ed Mounting screw head diameter must be 10 mm or less\u003cbr\u003eh System is serviceable while in the rack\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402423320888,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-2u-stab-in-static-readyrails-rail-kit-a4","title":"Dell A4 Stab-In Static ReadyRails Rail Kit | C597M","description":"\u003cdiv class=\"product-default-container\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eStab-in static rails require the inner (chassis) rail members must first be attached to the sides of the system and then inserted into the outer (cabinet) members installed in the rack. For systems that are 2U and larger, it is recommended that two people perform this operation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA4\u003c\/td\u003e\n\u003ctd\u003eReadyRails \u003c\/td\u003e\n\u003ctd\u003eStab-in Static\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX c\u003c\/td\u003e\n\u003ctd\u003e608\u003c\/td\u003e\n\u003ctd\u003e879\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e594\u003c\/td\u003e\n\u003ctd\u003e872\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e610\u003c\/td\u003e\n\u003ctd\u003ev\u003c\/td\u003e\n\u003ctd\u003e622 n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003en Rail depth represents cabinet assembly only and does not represent inner rail component that attaches to chassis\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402501177656,"sku":"C597M","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/a4.jpg?v=1707757882"},{"product_id":"dell-1u-stab-in-static-readyrails-rail-kit-a6","title":"Dell A6 Stab-in Static ReadyRails Rail Kit","description":"\u003cdiv class=\"product-default-container\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eStab-in static rails require the inner (chassis) rail members must first be attached to the sides of the system and then inserted into the outer (cabinet) members installed in the rack. For systems that are 2U and larger, it is recommended that two people perform this operation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA6\u003c\/td\u003e\n\u003ctd\u003eReadyRails \u003c\/td\u003e\n\u003ctd\u003eStab-in Static\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX c\u003c\/td\u003e\n\u003ctd\u003e508 j\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e751\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e494 j\u003c\/td\u003e\n\u003ctd\u003e744\u003c\/td\u003e\n\u003ctd\u003e519 j\u003c\/td\u003e\n\u003ctd\u003e762\u003c\/td\u003e\n\u003ctd\u003e515 j\u003cbr\u003e376 kn\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ej With middle brackets removed\u003cbr\u003ek With rear brackets removed (applies to 2-post or cantilever mount only)\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402554261816,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/a6.jpg?v=1707757968"},{"product_id":"dell-a5-stab-in-static-readyrails-rail-kit-5rn1m","title":"Dell A5 Stab-In Static ReadyRails Rail Kit | 5RN1M","description":"\u003cdiv class=\"product-default-container\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eStab-in static rails require the inner (chassis) rail members must first be attached to the sides of the system and then inserted into the outer (cabinet) members installed in the rack. For systems that are 2U and larger, it is recommended that two people perform this operation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA5\u003c\/td\u003e\n\u003ctd\u003eReadyRails \u003c\/td\u003e\n\u003ctd\u003eStab-in Static\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003e496\u003c\/td\u003e\n\u003ctd\u003e770\u003c\/td\u003e\n\u003ctd\u003e482\u003c\/td\u003e\n\u003ctd\u003e763\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e488\u003c\/td\u003e\n\u003ctd\u003e794\u003c\/td\u003e\n\u003ctd\u003e506 Q\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003eQ Depth maybe greater based on rail adjustability range\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":48088817205560,"sku":"5RN1M","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/A5-5RN1M.jpg?v=1711407481"},{"product_id":"dell-a5-w-switch-cover-stab-in-static-readyrails-rail-kit-f4wrp","title":"Dell A5 W\/Switch Cover Stab-In Static ReadyRails Rail Kit | F4WRP","description":"\u003cdiv class=\"product-default-container\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eStab-in static rails require the inner (chassis) rail members must first be attached to the sides of the system and then inserted into the outer (cabinet) members installed in the rack. For systems that are 2U and larger, it is recommended that two people perform this operation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA5\u003c\/td\u003e\n\u003ctd\u003eReadyRails \u003c\/td\u003e\n\u003ctd\u003eStab-in Static\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003e496\u003c\/td\u003e\n\u003ctd\u003e770\u003c\/td\u003e\n\u003ctd\u003e482\u003c\/td\u003e\n\u003ctd\u003e763\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e488\u003c\/td\u003e\n\u003ctd\u003e794\u003c\/td\u003e\n\u003ctd\u003e506 Q\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003eQ Depth maybe greater based on rail adjustability range\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":48104085881144,"sku":"F4WRP","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/A5-F4WRP.jpg?v=1711563350"},{"product_id":"dell-4u-rail-kit-fnkjy","title":"Dell 4U Static Rail Kit | FNKJY","description":"\u003cdiv class=\"product-default-container\"\u003e\n\u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePost Type\u003c\/b\u003e: N\/A\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail Type\u003c\/b\u003e: Static Rail Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail Height\u003c\/b\u003e: 4U\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCMA\u003c\/b\u003e: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":48104183103800,"sku":"FNKJY","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/FNKJY-4u.jpg?v=1711564475"},{"product_id":"k085t","title":"Dell Static ReadyRails 2U 2\/4-Post Rail Kit | K085T","description":"\u003cdiv class=\"product-section container jc-between-center is-flex-row\"\u003e \u003cdiv class=\"twelve columns medium-down--one-whole-NG product-section-extras quick-specs\"\u003e \u003cdiv class=\"one-whole columns quick-specs-data\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cul class=\"margin-empty margin-bottom\"\u003e\n\u003cli\u003e\n\u003cb\u003eType\u003c\/b\u003e: Static ReadyRails Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eForm Factor\u003c\/b\u003e: 2U\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting\u003c\/b\u003e: 2-Post and 4-Post Rack Compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTool-less Installation\u003c\/b\u003e: Yes (4-Post), Optional for 2-Post\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSliding Function\u003c\/b\u003e: No (Static Design)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Part Number --\u003e\u003cdiv class=\"four-NG  product-section-extras ideal-for\"\u003e\n\u003cdiv class=\"hfour\"\u003ePart Number:\u003c\/div\u003e\n\u003cul\u003e\u003cli\u003eK085T\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"sixteen column\"\u003e\n\u003cdiv class=\"eight medium-down--one-whole-NG \"\u003e\u003cp\u003eThe Dell Static ReadyRails 2U Rail Kit (K085T) is designed for secure, fixed mounting of 2U Dell PowerEdge servers in both 2-post and 4-post rack environments. Its static design offers simplicity and durability, making it ideal for deployments where sliding rails are unnecessary.\u003c\/p\u003e\u003c\/div\u003e\n\u003cdiv class=\"eight medium-down--one-whole-NG \"\u003e\u003cp\u003eWith support for tool-less installation in 4-post racks and compatibility with square, round, and threaded hole racks, the K085T kit provides flexibility for diverse data center configurations. It ensures quick deployment and a snug, reliable fit for your 2U server systems.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":48104398192952,"sku":"K085T","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/k085t-2u.jpg?v=1711567770"},{"product_id":"dell-4u-static-rail-kit","title":"Dell 4U Static Rail Kit","description":"\u003cdiv class=\"eight medium-down--one-whole-NG \"\u003e\n\u003cb\u003eCTO Item\u003c\/b\u003e\u003cp\u003eThis part is strictly for configuring Dell servers. If you have landed on this page and you're looking for a specific part number. Please send us a \"Request a Quote\" with the part number you need. \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Dell CTO","offers":[{"title":"Default Title","offer_id":48640573440312,"sku":null,"price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/FNKJY-4u_7ec8c57d-8719-4033-9c46-56f26280034a.jpg?v=1715724910"},{"product_id":"5px47","title":"Dell 1U Static Rail Kit | 5PX47","description":"\u003cdiv class=\"product-default-container\"\u003e\n\u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003e1U Sliding Rail Kit.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":49911259365688,"sku":"5PX47","price":0.0,"currency_code":"USD","in_stock":false}]},{"product_id":"n243x","title":"Dell A5 Stab-In Static ReadyRails Rail Kit | N243X","description":"\u003cdiv class=\"product-default-container\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eStab-in static rails require the inner (chassis) rail members must first be attached to the sides of the system and then inserted into the outer (cabinet) members installed in the rack. For systems that are 2U and larger, it is recommended that two people perform this operation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA5\u003c\/td\u003e\n\u003ctd\u003eReadyRails \u003c\/td\u003e\n\u003ctd\u003eStab-in Static\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003e496\u003c\/td\u003e\n\u003ctd\u003e770\u003c\/td\u003e\n\u003ctd\u003e482\u003c\/td\u003e\n\u003ctd\u003e763\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e488\u003c\/td\u003e\n\u003ctd\u003e794\u003c\/td\u003e\n\u003ctd\u003e506 Q\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003eQ Depth maybe greater based on rail adjustability range\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":50233085559096,"sku":"N243X","price":199.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/A5-5RN1M.jpg?v=1711407481"},{"product_id":"vpwtx","title":"VPWTX — Rail Kit | Dell PowerEdge R740xd2","description":"\u003cdiv class=\"product-section container jc-between-center is-flex-row\"\u003e \u003cdiv class=\"twelve columns medium-down--one-whole-NG product-section-extras quick-specs\"\u003e \u003cdiv class=\"one-whole columns quick-specs-data\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cul class=\"margin-empty margin-bottom\"\u003e\n\u003cli\u003e\n\u003cb\u003eBrand\u003c\/b\u003e: Dell\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eType\u003c\/b\u003e: 2U Static Rail Kit\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eCompatible System\u003c\/b\u003e: Dell PowerEdge R740XD2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"four-NG  product-section-extras ideal-for\"\u003e\n\u003cdiv class=\"hfour\"\u003ePart Number:\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eVPWTX\u003c\/li\u003e \u003cli\u003e23FHK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"sixteen column\"\u003e\n\u003cdiv class=\"eight medium-down--one-whole-NG \"\u003e\u003cp\u003eThe Dell VPWTX 2U Static Rail Kit provides durable and efficient rack mounting for the PowerEdge R740XD2 server. Designed for static installations, it offers stability and ease of deployment in enterprise racks.\u003c\/p\u003e\u003c\/div\u003e\n\u003cdiv class=\"eight medium-down--one-whole-NG \"\u003e\u003cp\u003eWith an alternate part number 23FHK, this rail kit is built to deliver consistent support in data centers needing reliable server mounting hardware.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":50867210715448,"sku":"Vpwtx","price":155.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/dell-rail-kit-Vpwtx---1.png?v=1753719725"},{"product_id":"4jn40","title":"Dell A8 Stab-In Static ReadyRails Rail Kit | 4JN40","description":"\u003cdiv class=\"product-default-container\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eStab-in static rails require the inner (chassis) rail members must first be attached to the sides of the system and then inserted into the outer (cabinet) members installed in the rack. For systems that are 2U and larger, it is recommended that two people perform this operation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA8\u003c\/td\u003e\n\u003ctd\u003eReadyRails \u003c\/td\u003e\n\u003ctd\u003eStab-in Static\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003eX c\u003c\/td\u003e\n\u003ctd\u003e608\u003c\/td\u003e\n\u003ctd\u003e879\u003c\/td\u003e\n\u003ctd\u003e594\u003c\/td\u003e\n\u003ctd\u003e872\u003c\/td\u003e\n\u003ctd\u003e610\u003c\/td\u003e\n\u003ctd\u003e898\u003c\/td\u003e\n\u003ctd\u003e622 n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003en Rail depth represents cabinet assembly only and does not represent inner rail component that attaches to chassis\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":51023411904824,"sku":"4JN40","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/dell-rail-kit-53d7m-out---3_ffbab105-d237-4872-ad0b-09b871723116.jpg?v=1753718955"},{"product_id":"4postrail","title":"Universal 1U 4-Post Rail Kit | 4POSTRAIL","description":"\u003cdiv class=\"product-section container jc-between-center is-flex-row\"\u003e \u003cdiv class=\"twelve columns medium-down--one-whole-NG product-section-extras quick-specs\"\u003e \u003cdiv class=\"one-whole columns quick-specs-data\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cul class=\"margin-empty margin-bottom\"\u003e\n\u003cli\u003e\n\u003cb\u003eModel\u003c\/b\u003e: CyberPower 4POSTRAIL\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eType\u003c\/b\u003e: 4-Post Rail Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility\u003c\/b\u003e: 1U, 2U, 3U, 18.5\"-29\" racks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity\u003c\/b\u003e: Up to 231 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeatures\u003c\/b\u003e: Adjustable, M5 screws included\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"four-NG  product-section-extras ideal-for\"\u003e \u003cdiv class=\"hfour\"\u003ePart Number:\u003c\/div\u003e \u003cul\u003e \u003cli\u003e4POSTRAIL\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Express Computer Systems","offers":[{"title":"Default Title","offer_id":51037627515192,"sku":"4POSTRAIL","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/universal-4postrail---3.png?v=1755883942"}],"url":"https:\/\/expresscomputersystems.com\/collections\/rail-kit-type-stab-in-static\/dell-series-r7725xd.oembed","provider":"Express Computer Systems","version":"1.0","type":"link"}