{"title":"readyrails-2","description":null,"products":[{"product_id":"drr12","title":"Dell A15 Sliding ReadyRails Il 4-Post Rail Kit | DRR12","description":"\u003cdiv class=\"product-section container jc-between-center is-flex-row\"\u003e \u003cdiv class=\"twelve columns medium-down--one-whole-NG product-section-extras quick-specs\"\u003e \u003cdiv class=\"one-whole columns quick-specs-data\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eSliding rails allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\u003cp\u003eCable management arm (CMA) is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003eStrain relief bar (SRB) is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003eSquare-hole describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003eRound-hole describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003eThreaded-hole describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"four-NG product-section-extras ideal-for\"\u003e\n\u003cdiv class=\"hfour\"\u003ePart Number:\u003c\/div\u003e\n\u003cul\u003e \u003cli\u003eDRR12\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA15\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eSliding\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c,d\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e631\u003c\/td\u003e\n\u003ctd\u003e868\u003c\/td\u003e\n\u003ctd\u003e617\u003c\/td\u003e\n\u003ctd\u003e862\u003c\/td\u003e\n\u003ctd\u003e631\u003c\/td\u003e\n\u003ctd\u003e884\u003c\/td\u003e\n\u003ctd\u003e736 b\u003c\/td\u003e\n\u003ctd\u003e862\u003cbr\u003e(770\/792)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003eb With CMA brackets removed\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ed Mounting screw head diameter must be 10 mm or less\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47401999171896,"sku":"DRR12","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/A15-1u-DRR12.jpg?v=1711561185"},{"product_id":"8n0jt","title":"Dell A12 Sliding ReadyRails Il 4-Post Rail Kit | 8N0JT","description":"\u003cdiv class=\"product-section container jc-between-center is-flex-row\"\u003e \u003cdiv class=\"twelve columns medium-down--one-whole-NG product-section-extras quick-specs\"\u003e \u003cdiv class=\"one-whole columns quick-specs-data\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eSliding rails allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\u003cp\u003eCable management arm (CMA) is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003c\/p\u003e \u003cp\u003eStrain relief bar (SRB) is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003eSquare-hole describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003c\/p\u003e \u003cp\u003eRound-hole describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003c\/p\u003e \u003cp\u003eThreaded-hole describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"four-NG product-section-extras ideal-for\"\u003e\n\u003cdiv class=\"hfour\"\u003ePart Number:\u003c\/div\u003e\n\u003cul\u003e \u003cli\u003eDRR12\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA12\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eSliding\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c,d\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e631\u003c\/td\u003e\n\u003ctd\u003e868\u003c\/td\u003e\n\u003ctd\u003e617\u003c\/td\u003e\n\u003ctd\u003e861\u003c\/td\u003e\n\u003ctd\u003e631\u003c\/td\u003e\n\u003ctd\u003e883\u003c\/td\u003e\n\u003ctd\u003e720 b\u003c\/td\u003e\n\u003ctd\u003e845\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003eb With CMA brackets removed\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ed Mounting screw head diameter must be 10 mm or less\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402121265464,"sku":"8N0JT","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/A12-8N0JT.jpg?v=1711410199"},{"product_id":"dell-2u-sliding-readyrails-ii-4-post-rail-kit-b6","title":"Dell B6 Sliding ReadyRails Il 4-Post Rail Kit | 0PWN3","description":"\u003cdiv class=\"product-section container jc-between-center is-flex-row\"\u003e\n\u003cdiv class=\"twelve columns medium-down--one-whole-NG product-section-extras quick-specs\"\u003e\n\u003cdiv class=\"one-whole columns quick-specs-data\"\u003e\n  \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\n\u003cp\u003e\u003cb\u003eSliding rails\u003c\/b\u003e allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eRound-hole\u003c\/b\u003e describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting.\u003c\/p\u003e\n\n\u003cp class=\"last\"\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c!-- Part Numbers--\u003e\n\u003cdiv class=\"four-NG medium-down--one-whole-NG product-section-extras ideal-for\"\u003e\n\u003cdiv class=\"hfour\"\u003ePart Number:\u003c\/div\u003e\n\u003cul\u003e\n\u003cli class=\"click-cell\" data-page=\"H4X6X\"\u003eH4X6X\u003c\/li\u003e\n\u003cli class=\"click-cell\" data-page=\"61KCY\"\u003e61KCY\u003c\/li\u003e\n\u003cli class=\"click-cell\" data-page=\"XV104\"\u003eXV104\u003c\/li\u003e\n\u003cli class=\"click-cell\" data-page=\"0PWN3\"\u003e0PWN3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003chr\u003e\n\u003cdiv class=\"table-mobile\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eB6\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eSliding\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c,d\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e631\u003c\/td\u003e\n\u003ctd\u003e868\u003c\/td\u003e\n\u003ctd\u003e617\u003c\/td\u003e\n\u003ctd\u003e861\u003c\/td\u003e\n\u003ctd\u003e631\u003c\/td\u003e\n\u003ctd\u003e883\u003c\/td\u003e\n\u003ctd\u003e714 b\u003c\/td\u003e\n\u003ctd\u003e845\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"20\"\u003e\n\u003cp\u003ea Minor conversion required\u003cbr\u003eb With CMA brackets removed\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ed Mounting screw head diameter must be 10 mm or less\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402260365624,"sku":"0PWN3","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/b6-1.jpg?v=1711386902"},{"product_id":"k87yw","title":"Dell B21 Sliding ReadyRails Il 4-Post 2U Rail Kit | K87YW","description":"\u003cdiv class=\"product-section container jc-between-center is-flex-row\"\u003e \u003cdiv class=\"twelve columns medium-down--one-whole-NG product-section-extras quick-specs\"\u003e \u003cdiv class=\"one-whole columns quick-specs-data\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eSliding rails\u003c\/b\u003e allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e \u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003c\/p\u003e \u003cp\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003c\/p\u003e \u003cp\u003e\u003cb\u003eRound-hole\u003c\/b\u003e describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003c\/p\u003e \u003cp class=\"last\"\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"four-NG product-section-extras ideal-for\"\u003e\n\u003cdiv class=\"hfour\"\u003ePart Number:\u003c\/div\u003e\n\u003cul\u003e\n\u003cli data-page=\"K87YW\" class=\"click-cell\"\u003eK87YW\u003c\/li\u003e\n\u003cli data-page=\"KN2D5\" class=\"click-cell\"\u003eKN2D5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eB21\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eSliding\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c,d\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e631\u003c\/td\u003e\n\u003ctd\u003e868\u003c\/td\u003e\n\u003ctd\u003e617\u003c\/td\u003e\n\u003ctd\u003e861\u003c\/td\u003e\n\u003ctd\u003e631\u003c\/td\u003e\n\u003ctd\u003e883\u003c\/td\u003e\n\u003ctd\u003e714 b\u003c\/td\u003e\n\u003ctd\u003e845\u003cbr\u003e(749\/769)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003eb With CMA brackets removed\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ed Mounting screw head diameter must be 10 mm or less\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402287563064,"sku":"K87YW","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/B21-K87YW-KN2D5_65d6ec66-50e7-4eb0-add9-95700e34a012.jpg?v=1711393056"},{"product_id":"dell-2u-sliding-readyrails-ii-4-post-rail-kit-b8","title":"Dell B8 Sliding ReadyRails Il 4-Post Rail Kit","description":"\u003cdiv class=\"product-default-container\"\u003e\n\u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cb\u003eSliding rails\u003c\/b\u003e  allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eB8\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eSliding\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c,d\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e686\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e883\u003c\/td\u003e\n\u003ctd\u003e674\u003c\/td\u003e\n\u003ctd\u003e876\u003c\/td\u003e\n\u003ctd\u003e686\u003c\/td\u003e\n\u003ctd\u003e898\u003c\/td\u003e\n\u003ctd\u003e794 b\u003c\/td\u003e\n\u003ctd\u003e883\u003cbr\u003e(834)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003eb With CMA brackets removed\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ed Mounting screw head diameter must be 10 mm or less\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402355589432,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"v5fmr","title":"Dell B12 3U Sliding ReadyRails Il 4-Post Rail Kit | V5FMR","description":"\u003cdiv class=\"product-default-container\"\u003e\n\u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eRIGHT\u003c\/b\u003e: MGC81\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLEFT\u003c\/b\u003e: K1R2V\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePost Type\u003c\/b\u003e: 4-Post Rail \u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail Type\u003c\/b\u003e: Sliding ReadyRails Il \u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail Height\u003c\/b\u003e: 3U\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCMA\u003c\/b\u003e: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cb\u003eSliding rails\u003c\/b\u003e  allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n  \u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003c\/p\u003e\n  \u003cp\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n  \u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003c\/p\u003e\n  \u003cp\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003c\/p\u003e\n  \u003cp\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n  \u003chr\u003e\n\u003cdiv class=\"table-mobile\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eB12\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eSliding\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c,d\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e600\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e894\u003c\/td\u003e\n\u003ctd\u003e586\u003c\/td\u003e\n\u003ctd\u003e887\u003c\/td\u003e\n\u003ctd\u003e600\u003c\/td\u003e\n\u003ctd\u003e909\u003c\/td\u003e\n\u003ctd\u003e773 b\u003c\/td\u003e\n\u003ctd\u003e926\u003cbr\u003e(877)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"20\"\u003e\n\u003cp\u003ea Minor conversion required\u003cbr\u003eb With CMA brackets removed\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ed Mounting screw head diameter must be 10 mm or less\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402390323512,"sku":"V5FMR","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/B12-V5FMR.jpg?v=1711402051"},{"product_id":"dell-2u-sliding-readyrails-ii-4-post-rail-kit-b10","title":"Dell B10 Sliding ReadyRails Il 4-Post Rail Kit","description":"\u003cdiv class=\"product-default-container\"\u003e\n\u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cb\u003eSliding rails\u003c\/b\u003e  allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eB10\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eSliding\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c,d\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e677\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e815\u003c\/td\u003e\n\u003ctd\u003e665\u003c\/td\u003e\n\u003ctd\u003e809\u003c\/td\u003e\n\u003ctd\u003e677\u003c\/td\u003e\n\u003ctd\u003e830\u003c\/td\u003e\n\u003ctd\u003e836\u003c\/td\u003e\n\u003ctd\u003e888\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ed Mounting screw head diameter must be 10 mm or less\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402403561784,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-2u-stab-in-static-readyrails-ii-4-post-rail-kit-b11","title":"Dell B11 Stab-in Static ReadyRails Il 4-Post Rail Kit","description":"\u003cdiv class=\"product-default-container\"\u003e\n\u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cb\u003eSliding rails\u003c\/b\u003e  allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eB11\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eStab-in Static\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e644\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e916\u003c\/td\u003e\n\u003ctd\u003e632\u003c\/td\u003e\n\u003ctd\u003e910\u003c\/td\u003e\n\u003ctd\u003e644\u003c\/td\u003e\n\u003ctd\u003e930\u003c\/td\u003e\n\u003ctd\u003e828\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402414375224,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-2u-stab-in-static-readyrails-ii-4-post-rail-kit-a9","title":"Dell A9 Stab-in Static ReadyRails Il 4-Post Rail Kit","description":"\u003cdiv class=\"product-default-container\"\u003e\n\u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cb\u003eSliding rails\u003c\/b\u003e  allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA9\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eStab-in Static h\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c,d\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e643\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e916\u003c\/td\u003e\n\u003ctd\u003e631\u003c\/td\u003e\n\u003ctd\u003e910\u003c\/td\u003e\n\u003ctd\u003e643\u003c\/td\u003e\n\u003ctd\u003e930\u003c\/td\u003e\n\u003ctd\u003e766\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ed Mounting screw head diameter must be 10 mm or less\u003cbr\u003eh System is serviceable while in the rack\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402423320888,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-2u-sliding-readyrails-ii-4-post-rail-kit-c4","title":"Dell C4 Sliding ReadyRails Il 4-Post Rail Kit","description":"\u003cdiv class=\"product-default-container\"\u003e\n\u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cb\u003eSliding rails\u003c\/b\u003e  allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eC4\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eSliding\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c,d\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e686\u003c\/td\u003e\n\u003ctd\u003e756\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e672\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e749\u003c\/td\u003e\n\u003ctd\u003e686\u003c\/td\u003e\n\u003ctd\u003e771\u003c\/td\u003e\n\u003ctd\u003e760\u003c\/td\u003e\n\u003ctd\u003e840\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ed Mounting screw head diameter must be 10 mm or less\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402446618936,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-2u-sliding-readyrails-ii-4-post-rail-kit-c2","title":"Dell C2 Sliding ReadyRails Il 4-Post Rail Kit","description":"\u003cdiv class=\"product-default-container\"\u003e\n\u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cb\u003eSliding rails\u003c\/b\u003e  allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eC2\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eSliding\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c,d\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e686\u003c\/td\u003e\n\u003ctd\u003e756\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e672\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e749\u003c\/td\u003e\n\u003ctd\u003e686\u003c\/td\u003e\n\u003ctd\u003e771\u003c\/td\u003e\n\u003ctd\u003e760\u003c\/td\u003e\n\u003ctd\u003e840\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ed Mounting screw head diameter must be 10 mm or less\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402457923896,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dell-5u-sliding-readyrails-ii-4-post-rail-kit-c3","title":"Dell C3 Sliding ReadyRails Il 4-Post Rail Kit","description":"\u003cdiv class=\"product-default-container\"\u003e\n\u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cb\u003eSliding rails\u003c\/b\u003e  allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eC3\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eSliding\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c,d\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e608\u003c\/td\u003e\n\u003ctd\u003e915\u003c\/td\u003e\n\u003ctd\u003e594\u003c\/td\u003e\n\u003ctd\u003e908\u003c\/td\u003e\n\u003ctd\u003e608\u003c\/td\u003e\n\u003ctd\u003e930\u003c\/td\u003e\n\u003ctd\u003e756\u003c\/td\u003e\n\u003ctd\u003e845\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ed Mounting screw head diameter must be 10 mm or less\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":47402479190328,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"m986j","title":"Dell B1 Sliding ReadyRails Il 4-Post Rail Kit | M986J","description":"\u003cdiv class=\"product-default-container\"\u003e\n\u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cb\u003eSliding rails\u003c\/b\u003e  allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eB10\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eReadyRails\u003c\/td\u003e\n\u003ctd\u003eSliding\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX f\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e692\u003c\/td\u003e\n\u003ctd\u003e756\u003c\/td\u003e\n\u003ctd\u003e678\u003c\/td\u003e\n\u003ctd\u003e749\u003c\/td\u003e\n\u003ctd\u003e657\u003c\/td\u003e\n\u003ctd\u003e770\u003c\/td\u003e\n\u003ctd\u003e751\u003c\/td\u003e\n\u003ctd\u003e840\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ef Requires the 2U Threaded Rack Adapter Brackets Kit (Dell PN PKCR1), which shifts the system forward in the rack by 17.3 mm\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":48088291803448,"sku":"M986J","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/B1-M986J.jpg?v=1711394409"},{"product_id":"61kcy","title":"Dell B6 Sliding ReadyRails Il 4-Post Rail Kit | 61KCY","description":"\u003cdiv class=\"product-section container jc-between-center is-flex-row\"\u003e\n\u003cdiv class=\"twelve columns medium-down--one-whole-NG product-section-extras quick-specs\"\u003e\n\u003cdiv class=\"one-whole columns quick-specs-data\"\u003e\n  \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eSliding rails\u003c\/b\u003e allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eRound-hole\u003c\/b\u003e describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting.\u003c\/p\u003e\n\n\u003cp class=\"last\"\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c!-- Part Numbers--\u003e\n\u003cdiv class=\"four-NG medium-down--one-whole-NG product-section-extras ideal-for\"\u003e\n\u003cdiv class=\"hfour\"\u003ePart Number:\u003c\/div\u003e\n\u003cul\u003e\n\u003cli class=\"click-cell\" data-page=\"H4X6X\"\u003eH4X6X\u003c\/li\u003e\n\u003cli class=\"click-cell\" data-page=\"61KCY\"\u003e61KCY\u003c\/li\u003e\n\u003cli class=\"click-cell\" data-page=\"XV104\"\u003eXV104\u003c\/li\u003e\n\u003cli class=\"click-cell\" data-page=\"0PWN3\"\u003e0PWN3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003chr\u003e\n\u003cdiv class=\"table-mobile\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eB6\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eSliding\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c,d\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e631\u003c\/td\u003e\n\u003ctd\u003e868\u003c\/td\u003e\n\u003ctd\u003e617\u003c\/td\u003e\n\u003ctd\u003e861\u003c\/td\u003e\n\u003ctd\u003e631\u003c\/td\u003e\n\u003ctd\u003e883\u003c\/td\u003e\n\u003ctd\u003e714 b\u003c\/td\u003e\n\u003ctd\u003e845\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"20\"\u003e\n\u003cp\u003ea Minor conversion required\u003cbr\u003eb With CMA brackets removed\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ed Mounting screw head diameter must be 10 mm or less\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":50233104990520,"sku":"61KCY","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/dell-b6-rail-kit-61kcy---2.jpg?v=1747334906"},{"product_id":"hd9vm","title":"Dell C2 Sliding ReadyRails Il 4-Post Rail Kit | HD9VM","description":"\u003cdiv class=\"product-default-container\"\u003e\n\u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cb\u003eSliding rails\u003c\/b\u003e  allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCable management arm (CMA)\u003c\/b\u003e is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStrain relief bar (SRB)\u003c\/b\u003e is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSquare-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eRound-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThreaded-hole\u003c\/b\u003e  describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eC2\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eSliding\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c,d\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e686\u003c\/td\u003e\n\u003ctd\u003e756\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e672\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e749\u003c\/td\u003e\n\u003ctd\u003e686\u003c\/td\u003e\n\u003ctd\u003e771\u003c\/td\u003e\n\u003ctd\u003e760\u003c\/td\u003e\n\u003ctd\u003e840\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ed Mounting screw head diameter must be 10 mm or less\u003cbr\u003e\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":50233106432312,"sku":"HD9VM","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/dell-c2-rail-kit-HD9VM---2.jpg?v=1747335302"},{"product_id":"96vh8","title":"Dell A15 Sliding ReadyRails Il 4-Post Rail Kit | 96VH8","description":"\u003cdiv class=\"product-section container jc-between-center is-flex-row\"\u003e \u003cdiv class=\"twelve columns medium-down--one-whole-NG product-section-extras quick-specs\"\u003e \u003cdiv class=\"one-whole columns quick-specs-data\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eSliding rails allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\u003cp\u003eCable management arm (CMA) is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003eStrain relief bar (SRB) is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003eSquare-hole describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003eRound-hole describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003eThreaded-hole describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"four-NG product-section-extras ideal-for\"\u003e\n\u003cdiv class=\"hfour\"\u003ePart Number:\u003c\/div\u003e\n\u003cul\u003e \u003cli\u003eDRR12\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA15\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eSliding\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c,d\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e631\u003c\/td\u003e\n\u003ctd\u003e868\u003c\/td\u003e\n\u003ctd\u003e617\u003c\/td\u003e\n\u003ctd\u003e862\u003c\/td\u003e\n\u003ctd\u003e631\u003c\/td\u003e\n\u003ctd\u003e884\u003c\/td\u003e\n\u003ctd\u003e736 b\u003c\/td\u003e\n\u003ctd\u003e862\u003cbr\u003e(770\/792)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003eb With CMA brackets removed\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ed Mounting screw head diameter must be 10 mm or less\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":50233114296632,"sku":"96VH8","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/dell-a15-rail-kit-96vh8---2.jpg?v=1747334499"},{"product_id":"h99y8","title":"Dell A15 Sliding ReadyRails Il 4-Post Rail Kit | H99Y8","description":"\u003cdiv class=\"product-section container jc-between-center is-flex-row\"\u003e \u003cdiv class=\"twelve columns medium-down--one-whole-NG product-section-extras quick-specs\"\u003e \u003cdiv class=\"one-whole columns quick-specs-data\"\u003e \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n\u003cp\u003eSliding rails allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms (CMAs) which enable the system to be extended out of the rack without disconnecting data\/power cables at the rear of the system. Unless otherwise indicated, all sliding rails are drop-in sliding rail design\u003c\/p\u003e\n\u003cp\u003eCable management arm (CMA) is a cable management accessory which connects to the rails behind the system. It allows a fully cabled system to be extended out of the rack into a service position. \u003cbr\u003e\u003cbr\u003eStrain relief bar (SRB) is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.\u003c\/p\u003e\n\u003cp\u003eSquare-hole describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard for mounting. \u003cbr\u003e\u003cbr\u003eRound-hole describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310- D standard for mounting. \u003cbr\u003e\u003cbr\u003eThreaded-hole describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for specific information on threaded-round hole mounting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"four-NG product-section-extras ideal-for\"\u003e\n\u003cdiv class=\"hfour\"\u003ePart Number:\u003c\/div\u003e\n\u003cul\u003e\u003cli\u003eH99Y8\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cdiv class=\"table-mobile\"\u003e\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"3\"\u003eRail identifier\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eMounting interface\u003c\/th\u003e\n\u003cth rowspan=\"3\"\u003eRail type\u003c\/th\u003e\n\u003cth colspan=\"5\"\u003eRack types supported\u003c\/th\u003e\n\u003cth colspan=\"6\"\u003eRail adjustability range (mm)\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRail depth (mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003e4-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e2-Post\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eSquare\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eRound\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eThreaded\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewithout CMA\/SRB\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ewith CMA(SRB)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare\u003c\/th\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003cth\u003eFlush\u003c\/th\u003e\n\u003cth\u003eCenter\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003cth\u003eMin\u003c\/th\u003e\n\u003cth\u003eMax\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA15\u003c\/td\u003e\n\u003ctd\u003eReadyRails II\u003c\/td\u003e\n\u003ctd\u003eSliding\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eX a,c,d\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e631\u003c\/td\u003e\n\u003ctd\u003e868\u003c\/td\u003e\n\u003ctd\u003e617\u003c\/td\u003e\n\u003ctd\u003e862\u003c\/td\u003e\n\u003ctd\u003e631\u003c\/td\u003e\n\u003ctd\u003e884\u003c\/td\u003e\n\u003ctd\u003e736 b\u003c\/td\u003e\n\u003ctd\u003e862\u003cbr\u003e(770\/792)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"20\"\u003e\u003cp\u003ea Minor conversion required\u003cbr\u003eb With CMA brackets removed\u003cbr\u003ec Mounting screws not included in the kit\u003cbr\u003ed Mounting screw head diameter must be 10 mm or less\u003c\/p\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":50972358017336,"sku":"H99Y8","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1906\/2613\/files\/dell-a15-rail-kit-96vh8---2.jpg?v=1747334499"},{"product_id":"6cjrh","title":"6CJRH - Dell ReadyRails II Static 2U Rail Kit Type B9","description":"\u003cdiv class=\"product-section container jc-between-center is-flex-row\"\u003e\n  \u003cdiv class=\"twelve columns medium-down--one-whole-NG product-section-extras quick-specs\"\u003e\n    \u003cdiv class=\"one-whole columns quick-specs-data\"\u003e\n      \u003cdiv class=\"hfour\"\u003eQuick Specs\u003c\/div\u003e\n      \u003cul class=\"margin-empty margin-bottom\"\u003e\n        \u003cli\u003e\n          \u003cb\u003eRail Type\u003c\/b\u003e: ReadyRails II static rails\u003c\/li\u003e\n        \u003cli\u003e\n          \u003cb\u003eDell Rail Type\u003c\/b\u003e: B9\u003c\/li\u003e\n        \u003cli\u003e\n          \u003cb\u003eRack Units\u003c\/b\u003e: 2U\u003c\/li\u003e\n        \u003cli\u003e\n          \u003cb\u003eMounting\u003c\/b\u003e: Tool-less in 4-post square or unthreaded round-hole racks; tooled in threaded-hole and 2-post racks\u003c\/li\u003e\n        \u003cli\u003e\n          \u003cb\u003eCable Management Arm\u003c\/b\u003e: Not supported\u003c\/li\u003e\n        \u003cli\u003e\n          \u003cb\u003eIncluded\u003c\/b\u003e: Left and right static rails; no cable management arm\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"four-NG medium-down--one-whole-NG product-section-extras ideal-for\"\u003e\n    \u003cdiv class=\"hfour\"\u003ePart Number:\u003c\/div\u003e\n    \u003cul\u003e\n      \u003cli\u003e6CJRH\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Dell","offers":[{"title":"Default Title","offer_id":53054031495480,"sku":"6CJRH","price":0.0,"currency_code":"USD","in_stock":false}]}],"url":"https:\/\/expresscomputersystems.com\/collections\/rail-kit-type-readyrails-2\/dell-series-c6100.oembed","provider":"Express Computer Systems","version":"1.0","type":"link"}